Does decalcification alter the tissue sound speed of rabbit supraspinatus tendon insertion? In vitro measurement using scanning acoustic microscopy

Failure of the tendon or ligament insertions is one of the most common injuries in the Orthopaedic field. To elucidate the pathogenesis of those injuries, the authors had attempted to measure the tissue sound speed that could be correlated to its elasticity using scanning acoustic microscopy (SAM). For the application of SAM to tendon or ligament insertions, it was necessary to determine the role of decalcification in SAM measurements since mineralized tissues including bone or mineralized fibrocartilage were present at the insertion site. To assess whether decalcification alters the tissue sound speed or not, supraspinatus tendon insertion of six Japanese white rabbits were measured with SAM operating in the frequency range of 50-150 MHz. Right supraspinatus tendons attached to the humeral head were cut into two pieces at the center of the tendon. Then, they were fixed with 10% neutralized formalin for 12 h. In each specimen, medial half was not decalcified, while lateral half was decalcified with ethylene-diamine-tetra-acetic acid (EDTA). After embedding in paraffin, 5 microm thick specimens were prepared for the measurement using SAM. The mean sound speed in each histologic zone was evaluated, and subsequently compared to that measured in the undecalcified and the decalcified specimens. Mean sound speed of non-mineralized fibrocartilage was 1544 m/s in the undecalcified specimens, while the value of 1541 m/s was determined in the decalcified ones. On the other hand, it decreased 2-3% after decalcification in the mineralized tissue including mineralized fibrocartilage and bone (mineralized fibrocartilage: undecalcified = 1648 m/s, decalcified = 1604 m/s; bone: undecalcified = 1716 m/s, decalcified = 1677 m/s). However, no significant differences were found between the undecalcified and the decalcified specimens (non-mineralized fibrocartilage: p = 0.84, mineralized fibrocartilage: p = 0.35, bone: p = 0.28). These results indicate that SAM could be applied to determine the properties of the tendon or the ligament insertions after decalcification with EDTA. Although SAM is applicable only for in vitro experimental study, it is expected that these data will contribute to better understanding concerning the biomechanics of tendon or ligament insertions as well as the pathogenesis of their failure at a microscopic level.     

Dimensional dependence of electronic structure of fullerene polymers

Fullerene polymers made of C(60) are systematically investigated by means of a first-principles pseudopotential approach within the local density approximation of the density functional theory. We assume 10 different structures of fullerene polymers. The first three are C(60) polymer networks cross-linked by [2+2] cycloadditional four-membered rings, and the other seven are composed of peanut-shaped fused C(60) polymer chains cross-linked by either seven-membered rings or eight-membered rings. Owing to the overlap of wave functions as well as the hybrid networks of sp(2)-like (3-fold coordinated) and sp(3)-like (4-fold coordinated) carbon atoms, the electronic structure is considerably different from each other. We find that the resulting electronic structure is either semiconductor or semimetal depending on the spatial dimensionality of materials.     

Biobased contents of biodegradable poly(epsilon-caprolactone) composites polymerized and directly molded using aluminium triflate from caprolactone with cellulose and inorganic filler

Poly(epsilon-caprolactone) (PCL) composite samples were prepared by polymerization and direct molding. The starting compound was epsilon-caprolactone monomer liquid combined with cellulose and inorganic fillers, using aluminium triflate as a catalyst at 80 degrees C, for 6 or 24 h. Cylinder-shaped PCL composite samples with a homogeneously dispersed cellulose filler were prepared with (-)M(n) = 4 600 ((-)M(w)/(-)M(n) = 2.9). The mechanical properties of the PCL composite samples were studied using compression test methods. The strength of a PCL composite with 50 wt.-% cellulose filler (10.8 MPa) was found to be lower than the PCL sample without fillers (19.2 MPa). The biobased content of the PCL composite with 50 wt.-% cellulose filler (51.67%) measured using accelerated mass spectrometry (AMS) was slightly higher than the carbon ratio of cellulose in the starting powder samples (41.3 mol-%). The biobased content of the polymer composite powders by AMS was found not to be affected by the presence of inorganic fillers, such as talc. The rate and extent of biodegradation, caused by Amano Lipase PS, of the PCL composite sample with cellulose filler (40% degradation in 4 d) was the same as that of a PCL sample without the cellulose filler.     

二维矩形腔体中混合流体行进波对流

Rayleigh-Benard模型是研究对流稳定性,时空结构和非线性特性的典型模型之一。本文的兴趣集中在二维矩形腔体中混合流体对流场的结构方面。利用SIMPLE算法数值求解流体力学方程组,模拟了充分发展的二维矩形腔体中混合流体对流。结果说明偏离传导失去稳定的系统经过亚临界分叉产生了振动对流。进一步,我们给出了分叉曲线及其沿分叉曲线的上部分支三个Rayleigh数对应的对流图案的垂直速度场,流线,温度场,浓度场和Shadowgraph强度的等值线图。所有场的结构分析表明浓度场及Shadowgraph强度的等值线图可以很好的特征行进波的运动特性。     

Nonclassical Abramov Products Formed on Orifices of Cage-Opened C60 Derivatives

By nucleophilic addition of phosphite P(OMe)₃ to a cage-opened C₆₀ derivative, α-hydrophosphate and enol phosphate were obtained as kinetic and thermodynamic products, respectively. Different from classical Abramov products bearing a phosphorus–carbon bond, these products have a phosphorus–oxygen bond. The observed anomaly originates from the fully conjugated π system, which significantly stabilizes zwitterionic intermediates bearing a phosphorus–oxygen bond. The thus formed enol phosphate was found to exhibit an intense absorption band that extended to 730 nm, reflecting the intramolecular charge-transfer transitions. We also report domino phosphorylation reactions, which gave a cage-opened C₆₀ derivative bearing a direct P−C bond.     

Reactions on a 1,2-Dicarbonyl Moiety of a Fullerene Skeleton

A 1,2-dicarbonyl moiety on a cage-opened fullerene skeleton is one of suitable building blocks for the further derivatization. Herein, we discuss the chemical transformation of a 1,2-dicarbonyl compound into β-oxo-phosphorus ylide, acid anhydride, and α-methylene carbonyl derivatives. Despite possessing a sterically small methylene unit in the last one, the release of an encapsulated water molecule was significantly supressed whereas the β-oxo-phosphorus ylide bearing three bulky p-tolyl groups on the P-atom enabled the faster insertion/release dynamics, implying the flexibility of the phosphonium substituent. The replacement of the carbonyl group with phosphorus ylide and methylene units largely varied electrochemical properties of the fullerene skeleton, likely arising from the anionic charge delocalized over the entire molecule and removal of an electron-withdrawable carbonyl group, respectively.     

Influence of N-Substituents on Photovoltaic Properties of Singly Bay-Linked Dimeric Perylene Diimides

The influence of N-substituents on the photovoltaic properties of singly bay-linked perylene diimides (diPDIs) was systematically investigated to understand the aromatic-aliphatic balance, which is beneficial for achieving high device performance in organic photovoltaic (OPV) systems. The synthesis of various N-substituted diPDIs was successfully achieved using a newly developed one-step procedure, resulting in sufficiently high yields. Detailed investigations of seven variants of diPDIs demonstrated that the primary alkyl substituents, particularly the 2-ethylhexyl group, induce the self-organized growth of thin films with high crystallinity. This is beneficial for enhancing the device performance of bulk heterojunction (BHJ) systems. The results presented herein reveal the important roles of alkyl side chains as hydrophobic solubilizing auxiliaries or primary determinants in the control of the active layer nanomorphology. This offers a valuable guideline that is essential for developing high-performance organic semiconductor materials for future practical applications.     

Synthesis of Highly Emissive Fluorophores Based on Multiply Stacked Anthracene Arrangement

Newly designed fluorophore systems with feather-like structures were constructed by connecting bisanthracene building units via a concise reaction sequence of bromination, etherification, and desilylation. Spectroscopic characterizations revealed that all of the fluorophore systems achieved high light absorptivity and high emission efficiency by preventing closely spaced anthracene chromophores from mutual interactions to reduce concomitant energy loss by fluorescence quenching. The application of fluorophore systems for the preparation of light-harvesting dyad materials has successfully demonstrated their potential utility as versatile photofunctional tools.     

Near-Infrared-Absorbing Chiral Open [60]Fullerenes

Though [60]fullerene is an achiral molecular nanocarbon with I_h symmetry, it could attain an inherent chirality depending upon a functionalization pattern. The conventional chiral induction of C₆₀ relies mainly upon a multiple addition affording a mixture of achiral and chiral isomers while their chiral function would be largely offset by the existence of pseudo-mirror plane(s). These are major obstacles to proceed further study on fullerene chirality and yet leave its understanding elusive. Herein, we showcase a carbene-mediated synthesis of C₁-symmetric chiral open [60]fullerenes showing an intense far-red to near-infrared absorption. The large dissymmetry factor of |g_abs|=0.12 was achieved at λ=820 nm for circular dichroism in benzonitrile. This is, in general, unachievable by other small chiral organic molecules, demonstrating the potential usage of open [60]fullerenes as novel types of chiral chromophores.     

Living polymerization of propylene and 1-hexene using bis-Cp type metallocene catalysts

To check the possibility of living polymerization with a biscyclopentadienyl metallocene, propylene polymerization was conducted by Cp₂ZrMe₂ at –78°C or Cp₂HfMe₂ at –50°C using B(C₆F₅)₃ and AlOct₃ as a cocatalyst. The polymer yield increased linearly with polymerization time. The polypropylene obtained showed narrow molecular weight distribution (M_w/M_n 1.04–1.15). In addition, the number-average molecular weight increased in proportion to the polymerization time. It was, thus, found that living polymerization of propylene proceeds with the catalyst systems at a very low temperature. Isospecific living polymerization of 1-hexene also proceeded with the rac-(et)Ind₂ZrMe₂ catalyst at –78°C.