Stereoselective syntheses of 1,4-dideoxy-1,4-imino-octitols and novel tetrahydroxyindolizidines

A new route for the preparation of four new indolizidines, (1R,2S,6S,7S,8aS)- and (1R,2S,6R,7R,8aS)-1,2,6,7-tetrahydroxyindolizidine (30 and 32) and (1S,2R,7S,8S,8aR)- and (1S,2R,7R,8R,8aR)-1,2,7,8-tetrahydroxyindolizidine (44 and 46), is reported. The synthesis is based on Knoevenagel homologation of the readily available enantiomerically pure pyrrolidin-carbaldehydes 13 and 37followed by asymmetric dihydroxylation of the subsequent alkenyl pyrrolidines and cyclization of the corresponding imino-octitols. The new indolizidines and their precursors (imino-octitols 20, 25, 26) and indolizidinones 28a and 28b have been tested for inhibitory activities toward 26 glycosidases. The enzymatic inhibition of trans-7-hydroxy-d-(-)-swainsonine (44) toward alpha-mannosidases is similar to that described for trans-7-hydroxy-l-(+)-swainsonine (11b) toward naringinase (alpha-l-rhamnosidase from Penicillium decumbens).     

Synthesis and Glycosidase Inhibitory Activity of 7‐Deoxycasuarine

Reaction of 1,4‐anhydro‐2,3,5‐tri‐O‐benzyl‐1‐deoxy‐1‐imino‐D ‐arabinitol N‐oxide ( 8 ) with allyl alcohol produced a 3.6 : 1 mixture of the two pyrrolo[1,2‐b]isoxazole derivatives 13 and 14 . The major adduct 13 was converted to 7‐deoxycasuarine ( 7 ), a potent, specific, and competitive inhibitor of amyloglucosidase from Rhizopus mold (see Table).     

Preparation and evaluation of carbon-supported catalysts for ethanol oxidation

Supported PtSnIr/C, PtSn/C, and IrSn/C catalysts with potential application in a direct alcohol fuel cell were prepared by chemical reduction employing Pechini methodology. The catalyst particles were characterized by high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy (XPS). Linear sweep voltammetry (LV), chronoamperometry, and electrochemical impedance spectroscopy (EIS) measurements were performed by using a glassy carbon working electrode covered with the catalyst in a 1 M ethanol?+?0.5 M H₂SO₄ solution at 60 °C. It was demonstrated through XPS that PtSnIr/C and IrSn/C contain both IrO₂ and SnO₂. LV and chronoamperometry show a better catalytic behavior for ethanol oxidation on PtSnIr/C in the low-potential region and the improvement is attributed to the presence of both Sn and Ir oxides. The EIS accurately established that PtSnIr/C improved ethanol oxidation at lower potentials than PtSn/C.     

Reverse flow-injection manifold for spectrofluorimetric determination of aluminum in drinking water

A simple reverse flow-injection (rFIA) manifold for the direct determination of aluminum in drinking water is proposed. This rapid and sensitive method is based on the formation of an Al(3+) complex with salicylaldehyde picolinoylhydrazone (SAPH), which shows a maximum blue-green fluorescence (lambda(ex)=384 nm, lambda(em)= 468 nm) at pH 5.4. Operative conditions both for batch and rFIA procedures were investigated including reagent concentration, buffer solutions, injection loop, reacting coil and wavelengths used for the fluorimetric detection. The tolerance limits of foreign ions have been also evaluated, before and after the addition of masking agents. The reverse flow-injection procedure allows determination of Al(3+) at ppb level (LOD: 1.9 mug l(-1)) within a working range of 5-30 mug l(-1). The proposed method was successfully employed for the determination of Al(3+) in several commercial drinking, soft drinking (as certified reference material), and tap water samples.     

Determination of 3-amino-1,2,4-triazole (amitrole) in environmental waters by capillary electrophoresis

3-Amino-1,2,4-triazole (amitrole) is a widely used pesticide, with many difficulties to be analyzed at the regulatory level in drinking water, because its high solubility in water. This paper describes a simple and fast method for the simultaneous determination of amitrole and atrazin-2-hydroxy, principal degradation product of s-triazines, by capillary zone electrophoresis. Separation and determination of these herbicides in water samples was performed in 0.02 mol l⁻¹ phosphate buffer at pH 3.2. The method allows determination of the amitrole and atrazin-2-hydroxy in water samples in concentration lower than 100 μg l⁻¹. The detection limits using a previous preconcentration step of amitrole in Alberche River (Comunidad Autónoma de Madrid, Spain) and drinking water spiked samples was of 4 μg l⁻¹.     

Strain‐Induced Isomerization in One‐Dimensional Metal–Organic Chains

The ability to use mechanical strain to steer chemical reactions creates completely new opportunities for solution‐ and solid‐phase synthesis of functional molecules and materials. However, this strategy is not readily applied in the bottom‐up on‐surface synthesis of well‐defined nanostructures. We report an internal strain‐induced skeletal rearrangement of one‐dimensional (1D) metal–organic chains (MOCs) via a concurrent atom shift and bond cleavage on Cu(111) at room temperature. The process involves Cu‐catalyzed debromination of organic monomers to generate 1,5‐dimethylnaphthalene diradicals that coordinate to Cu adatoms, forming MOCs with both homochiral and heterochiral naphthalene backbone arrangements. Bond‐resolved non‐contact atomic force microscopy imaging combined with density functional theory calculations showed that the relief of substrate‐induced internal strain drives the skeletal rearrangement of MOCs via 1,3‐H shifts and shift of Cu adatoms that enable migration of the monomer backbone toward an energetically favorable registry with the Cu(111) substrate. Our findings on this strain‐induced structural rearrangement in 1D systems will enrich the toolbox for on‐surface synthesis of novel functional materials and quantum nanostructures.     

Development of a method based on on-line reversed phase liquid chromatography and gas chromatography coupled by means of an adsorption–desorption interface for the analysis of selected chiral volatile compounds in methyl jasmonate treated strawberries

A method based on the use of the through oven transfer adsorption–desorption (TOTAD) interface in on-line coupling between reversed phase liquid chromatography and gas chromatography (RPLC–GC) for the determination of chiral volatile compounds was developed. In particular, the method was applied to the study of the influence of methyl jasmonate (MJ) treatment on the production and enantiomeric composition of selected aroma compounds in strawberry. The compounds studied were ethyl 2-methylbutanoate, linalool and 4-hydroxy-2,5-dimethyl-3(2H)-furanone (i.e. furaneol), which were examined on days 3, 6 and 9 after treatment. The method developed resulted in relative standard deviations (RSDs) of 21.6%, 8.1% and 9.8% and limits of detection (LD) of 0.04, 0.07 and 0.02 mg/l for ethyl 2-methylbutanoate, linalool and furaneol, respectively. The application of the RPLC–TOTAD–GC method allowed higher levels of ethyl 2-methylbutanoate, linalool and furaneol to be detected, particularly after 9 days of treatment. Besides, MJ demonstrated to affect the enantiomeric distribution of ethyl 2-methylbutanoate. On the contrary, the enantiomeric composition of linalool and furaneol kept constant in both control and MJ-treated strawberries throughout the study. These results are discussed.     

Tetranuclear Pt<Subscript>2</Subscript>Cu<Subscript>2</Subscript> Complex with a Staircase-Shaped Chain Aggregate in the Solid State

The reaction of the tetranuclear cyanide aquo complex [{Pt(CN)₄Cu(bipy)(H₂O)}₂]· 2H₂O with aqueous ammonia produces the new tetranuclear ammino-containing product [{Pt(CN)₄Cu(bipy)(NH₃)}₂] (1), with terminal cyanide groups and with NH₃ coordinated to the Cu atom. The distorted trigonal bipyramidal coordination about copper in 1 differs from the square-pyramidal coordination present in the starting material. The bipyridine ligand in 1 is nearly perpendicular to the tetranuclear core of the molecule, as opposed to its coplanar disposition in the aquo complex. The two platinum atoms of the tetranuclear core in 1 form Pt···Pt interactions of 3. 2390(8) Å with platinum atoms of neighboring molecules, producing an echelon-shaped supramolecular chain held together by staggered (CN)₄Pt···Pt(CN)₄ linkages, an aggregate structure which does not have a precedent in chemistry derived from the Pt(CN)₄ building block.     

Copper(I) complexes with bipyridyl and phosphine ligands: a systematic study

Phosphorescent copper(I) complexes carrying 2,2'-bipyridyl derivatives and phosphine ligands have been prepared and fully characterised. The role of the bipyridyl as well as the phosphine ligands in defining the optical, as well as the chemical properties of the complexes, are discussed. The light emission of these complexes is investigated as a function of the molecular geometry: rigid complexes with restricted freedom to rearrange in the excited state are found to show a quantum yield of phosphorescence one order of magnitude higher than those complexes with no steric constraint. The complexes have been extruded in a polymer matrix as a proof of principle of their processability.