Wind field deduced from marine SAR images

Summary A recently improved model capable of extracting the wind field from SAR imagery without the aid of ?sea truth? is applied to ERS-1 SAR data for the Mediterranean Sea. The model is based on the properties of the relationship between the first two moments of the probabilistic distribution function of SAR signals as well as on spectral analysis of the SAR signal itself.     

Thermal Stability of Sol-Gel Hydrotalcites

Sol-Gel Hydrotalcites were synthesized using magnesium ethoxide and variable aluminum sources: aluminum acetilacetonate, aluminum chloride, aluminum nitrate and aluminum sulfate; in all cases, the gelation was done at pH 10. X-ray diffraction studies show that the crystallinity depends on the aluminum precursor used. The crystallinity was found in the order aluminum acetylcetonate>aluminum chloride>aluminum nitrate>aluminum sulfate. The precursor determines the sintering behavior as well.     

Investigation of proton-proton short-range correlations via the 12C(e,e'pp) reaction

We investigated simultaneously the 12C(e,e'p) and 12C(e,e'pp) reactions at Q2=2 (GeV/c)2, xB=1.2, and in an (e, e'p) missing-momentum range from 300 to 600 MeV/c. At these kinematics, with a missing momentum greater than the Fermi momentum of nucleons in a nucleus and far from the delta excitation, short-range nucleon-nucleon correlations are predicted to dominate the reaction. For (9.5+/-2)% of the 12C(e,e'p) events, a recoiling partner proton was observed back-to-back to the 12C(e,e'p) missing-momentum vector, an experimental signature of correlations.     

A Bioinspired Molybdenum Complex as a Catalyst for the Photo‐ and Electroreduction of Protons

A molybdenum–dithiolene–oxo complex was prepared as a model of some active sites of Mo/W‐dependent enzymes. The ligand, a quinoxaline–pyran‐fused dithiolene, mimics molybdopterin present in these active sites. For the first time, this type of complex was shown to be active as a catalyst for the photoreduction of protons with excellent turnover numbers (500) and good stability in aqueous/organic media and for the electroreduction of protons in acetonitrile with remarkable rate constants (1030 s^?1 at ?1.3 V versus Ag/AgCl). DFT calculations provided insight into the catalytic cycle of the reaction, suggesting that the oxo ligand plays a key role in proton exchange. These results provide a basis to optimize this new class of H₂‐evolving catalysts.     

Influence of Ag+ on the Magnetic Response of [2.2.2]Paracyclophane: NMR Properties of a Prototypical Organic Host for Cation Binding Based on DFT Calculations

The complexation of metal cations into a host–guest situation is particularly well exemplified by [2.2.2]paracyclophane and Ag^I, which leads to a strong cation–π interaction with a specific face of the host molecule. Through this study we sought a deeper understanding of the effects the metal center has on the NMR spectroscopic properties of the prototypical organic host, generating theoretical reasons for the observed experimental results with an aim to determine the role of the cation–π interaction in a host–guest scenario. From an analysis of certain components of the induced magnetic field and the ¹³C NMR shielding tensor under its own principal axis system (PAS), the local and overall magnetic behavior can be clearly described. Interestingly, the magnetic response of such a complex exhibits a large axis-dependent behavior, which leads to an overall shielding effect for the coordinating carbon atoms and a deshielding effect for the respective uncoordinated counterparts, evidence that complements previous experimental results. This proposed approach can be useful to gain further insight into the local and overall variation of NMR shifts for host–guest pairs involving both inorganic and organic hosts.     

Characterization of Glycan Structures of Chondroitin Sulfate-Glycopeptides Facilitated by Sodium Ion-Pairing and Positive Mode LC-MS/MS

Purification and liquid chromatography-tandem mass spectrometry (LC-MS/MS) characterization of glycopeptides, originating from protease digests of glycoproteins, enables site-specific analysis of protein N- and O-glycosylations. We have described a protocol to enrich, hydrolyze by chondroitinase ABC, and characterize chondroitin sulfate-containing glycopeptides (CS-glycopeptides) using positive mode LC-MS/MS. The CS-glycopeptides, originating from the Bikunin proteoglycan of human urine samples, had ΔHexAGalNAcGlcAGalGalXyl-O-Ser hexasaccharide structure and were further substituted with 0-3 sulfate and 0-1 phosphate groups. However, it was not possible to exactly pinpoint sulfate attachment residues, for protonated precursors, due to extensive fragmentation of sulfate groups using high-energy collision induced dissociation (HCD). To circumvent the well-recognized sulfate instability, we now introduced Na⁺ ions to form sodiated precursors, which protected sulfate groups from decomposition and facilitated the assignment of sulfate modifications. Sulfate groups were pinpointed to both Gal residues and to the GalNAc of the hexasaccharide structure. The intensities of protonated and sodiated saccharide oxonium ions were very prominent in the HCD-MS2 spectra, which provided complementary structural analysis of sulfate substituents of CS-glycopeptides. We have demonstrated a considerable heterogeneity of the bikunin CS linkage region. The realization of these structural variants should be beneficial in studies aimed at investigating the importance of the CS linkage region with regards to the biosynthesis of CS and potential interactions to CS binding proteins. Also, the combined use of protonated and sodiated precursors for positive mode HCD fragmentation analysis will likely become useful for additional classes of sulfated glycopeptides.

Open image in new window

Graphical Abstract ?

     

Rapid species identification of seafood spoilage and pathogenic Gram-positive bacteria by MALDI-TOF mass fingerprinting

The rapid identification of food pathogenic and spoilage bacteria is important to ensure food quality and safety. Seafood contaminated with pathogenic bacteria is one of the major causes of food intoxications, and the rapid spoilage of seafood products results in high economic losses. In this study, a collection of the main seafood pathogenic and spoilage Gram-positive bacteria was compiled, including Bacillus spp., Listeria spp., Clostridium spp., Staphylococcus spp. and Carnobacterium spp. The strains, belonging to 20 different species, were obtained from the culture collections and studied by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). A reference library was created, including the spectral fingerprints of 32 reference strains and the extracted peak lists with 10-30 peak masses. Genus-specific as well as species-specific peak masses were assigned and could serve as biomarkers for the rapid bacterial identification. Furthermore, the peak mass lists were clustered with the web-application SPECLUST to show the phyloproteomic relationships among the studied strains. Afterwards, the method was successfully applied to identify six strains isolated from seafood by comparison with the reference library. Additionally, phylogenetic analysis based on the 16S rRNA gene was carried out and contrasted with the proteomic approach. This is the first time MALDI-TOF MS fingerprinting is applied to Gram-positive bacterial identification in seafood, being a fast and accurate technique to ensure seafood quality and safety.     

Split injection: A simple introduction of subnanoliter sample volumes for chip electrophoresis

The ability to accurately inject small volumes of sample into microfluidic channels is of great importance in electrophoretic separations. While electrokinetic injection of nanoliter scale volumes is commonly utilized in microchip capillary electrophoresis (MCE), mobility and matrix bias makes quantitation difficult. Herein, we describe a new injection method based on the simple patterning of the crossing of channels that does not require sophisticated instrumentation. The sample volume injected into the separation channel is dependent on the ratio of the widths of the crossing channels. This injection method is capable of introducing, into a separation channel, multiple plugs of sample on a large scale. This injection technique is tested for zone electrophoresis in native and surface modified poly(dimethylsiloxane) (PDMS) chips.     

Click assembly of dye-functionalized octasilsesquioxanes for highly efficient and photostable photonic systems

New hybrid organic–inorganic dyes based on an azide‐functionalized cubic octasilsesquioxane (POSS) as the inorganic part and a 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BDP) chromophore as the organic component have been synthesized by copper(I)‐catalyzed 1,3‐dipolar cycloaddition of azides to alkynes. We have studied the effects of the linkage group of BDP to the POSS unit and the degree of functionalization of this inorganic core on the ensuing optical properties by comparison with model dyes. The high fluorescence of the BDP dye is preserved in spite of the linked chain at its meso position, even after attaching one BDP moiety to the POSS core. The laser action of the new dyes has been analyzed under transversal pumping at 532 nm in both the liquid phase and when incorporated into solid polymeric matrices. The monosubstituted new hybrid dye exhibits high lasing efficiency of up to 56 % with high photostability, with its laser output remaining at the initial value after 4×10⁵ pump pulses in the same position of the sample at a repetition rate of 30 Hz. However, functionalization of the POSS core with eight fluorophores leads to dye aggregation, as quantum mechanical simulation has revealed, worsening the optical properties and extinguishing the laser action. The new hybrid systems based on dye‐linked POSS nanoparticles open up the possibility of using these new photonic materials as alternative sources for optoelectronic devices, competing with dendronized or grafted polymers.     

Synthetic strategies for the surface functionalisation of gold nanoparticles with metals and metal clusters

The reaction of the new ditopic thiol-phosphine compound HS(CH(2))(11)OOCC(6)H(4)PPh(2) (L) with an excess of dodecanethiol-protected gold nanoparticles gave the asymmetric gold complex [CH(3)(CH(2))(11)SAuPPh(2)C(6)H(4)COO(CH(2))(11)SH] (4), but no phosphine-protected gold nanoparticles were formed. However, by blocking the phosphine function in L with metal fragments, we have been able to produce gold nanoparticles functionalised with AuCl- and cluster [Fe(2)(CO)(7)Au] units on the surface by the method of ligand-place exchange reaction.