Chemometric Strategies to Develop a Nanocomposite Electrode for Simultaneous Determination of Ascorbic Acid,Dopamine, and Uric Acid

A simple and sensitive method for simultaneously measuring dopamine (DA), ascorbic acid (AA), and uric acid (UA) using a poly(1‐aminoanthracene) and carbon nanotubes nanocomposite electrode is presented. The experimental parameters for composite film synthesis as well as the variables related to simultaneous determination of DA, AA, and UA were optimized at the same time using fractional factorial and Doehlert designs. The use of carbon nanotubes and poly(1‐aminoanthracene) in association with a cathodic pretreatment led to three well‐defined oxidation peaks at potentials around ?0.039, 0.180 and 0.351 V (vs. Ag/AgCl) for AA, DA, and UA, respectively. Using differential pulse voltammetry, calibration curves for AA, DA, and UA were obtained over the range of 0.16–3.12×10^?3 mol L^?1, 3.54–136×10^?6 mol L^?1, and 0.76–2.92×10^?3 mol L^?1, with detection limits of 3.95×10^?5 mol L^?1, 2.90×10^?7 mol L^?1, and 4.22×10^?5 mol L^?1, respectively. The proposed method was successfully applied to determine DA, AA, and UA in biological samples with good results.     

Detection of dopamine in the presence of excess ascorbic acid at physiological concentrations through redox cycling at an unmodified microelectrode array

The electrochemical behavior of dopamine was examined under redox cycling conditions in the presence and absence of a high concentration of the interferent ascorbic acid at a coplanar, microelectrode array where the area of the generator electrodes was larger than that of the collector electrodes. Redox cycling converts a redox species between its oxidized and reduced forms by application of suitable potentials on a set of closely located generator and collector electrodes. It allows signal amplification and discrimination between species that undergo reversible and irreversible electron transfer. Microfabrication was used to produce 18 individually addressable, 4-μm-wide gold band electrodes, 2 mm long, contained in an array having an interelectrode spacing of 4 μm. Because the array electrodes are individually addressable, each can be selectively biased to produce an overall optimal electrochemical response. Four adjacent microbands were shorted together to serve as the collector, and were flanked on each side by seven microbands shorted as the generator (a ratio of 1:3.5 of electroactive area, respectively). This configuration achieved a detection limit of 0.454?±?0.026 μM dopamine at the collector in the presence of 100 μM ascorbic acid in artificial cerebrospinal fluid buffer, concentrations that are consistent with physiological levels. Enhancement by surface modification of the microelectrode array to achieve this detection limit was unnecessary. The results suggest that the redox cycling method may be suitable for in vivo quantification of transients and basal levels of dopamine in the brain without background subtraction.

Development and validation studies for determination of phenylpropanoid‐substituted flavan‐3‐ols in semipurified extract of Trichilia catigua by high‐performance liquid chromatography with photodiode array detection

The phenolic compounds are the main phytochemical constituents of the bark of Trichilia catigua and are commonly used for medicinal purposes. An HPLC method for the simultaneous quantification of phenolic compounds (procyanidin B2 (PB2), epicatechin (EPC), chinchonains Ia, Ib, IIa, IIb, catechin, and chrologenic acid) in T. catigua extract was developed and validated. A suitable chromatographic system was selected, which uses a gradient elution with methanol/ACN (75:25), and water both with 0.05% TFA, as mobile phase, column Luna, 280 nm, and flow 0.4 mL/min. Validation of the analytical method was based on the parameters: linearity, precision, LODs and LOQs, accuracy, robustness, and stability. The method showed linearity for PB2 and EPC, in the range 10–120 μg/mL with good correlation coefficients (>0.996). For precision, the repeatability ranged from 1.89 to 3.23%, and the values for accuracy for PB2 and EPC were 95 and 89%, respectively. The LODs and LOQs for PB2 were 1.36 and 4.12 μg/mL, and for EPC were 2.18 and 6.61 μg/mL, respectively. The method was robust under the conditions employed. The proposed method could be employed for quality assessment of T. catigua, as well as pharmaceutical products.     

Sun Exposure over a Lifetime in Australian Adults from Latitudinally Diverse Regions

Spatio‐temporal patterns in sun exposure underlie variations in skin cancer incidence and vitamin D deficiency, indicate effectiveness of sun protection programs and provide insights into future health risks. From 558 adults across four regions of Australia (Brisbane (27°S), Newcastle (33°S), Geelong and the Western Districts of Victoria (37°S) and Tasmania (43°S)), we collected: self‐report data on time‐in‐the‐sun from age 6 years; natural skin color and ethnicity; silicone skin casts (for cumulative skin damage); and serum for vitamin D status. Ambient ultraviolet radiation (UVR) at the location of residence, with time‐in‐the‐sun, was used to calculate a “UVR dose” for each year of life. Individuals maintained their ranking compared to their peers for time‐in‐the‐sun in summer compared to winter and across ages (Spearman rho 0.24–0.84, all P < 0.001). Time‐in‐the‐sun decreased with age in all birth cohorts, and over calendar time. Summer time‐in‐the‐sun increased with increasing latitude (P < 0.001). Seasonal variation in vitamin D status had greater amplitude and vitamin D deficiency increased with increasing latitude. Temporal patterns are consistent with effectiveness of sun protection programs. Higher relative time‐in‐the‐sun persists from childhood through adulthood. Lower summer time‐in‐the‐sun in the warmest location may have implications for predictions of UVR‐related health risks of climate change.     

Selenides and diselenides containing oxadiazoles: a new class of functionalised materials

A simple and efficient procedure for the synthesis of a new class of organoselenium liquid crystal compounds was developed. The coupling of aryl bromides with elemental selenium was catalysed using copper oxide nanopowder in the presence of potassium hydroxide employing dimethyl sulfoxide as the solvent. This is the first report of the synthesis and characterisation of liquid crystal-based diselenides. Their mesophases were characterised by polarising optical microscopy and differential scanning calorimetry. Compounds 1, 2 and 4b exhibited the smectic A phase. In addition, these compounds showed weak blue fluorescence in solution (λ_{max. em.} 350–405 nm) and a Stokes shift of around 90 nm.     

Biological N Removal from Wastes Generated from Amine-Based CO2 Capture: Case Monoethanolamine

Large-scale amine-based CO₂ capture will generate waste containing large amounts of ammonia, in addition to contaminants such as the actual amine as well as degradation products thereof. Monoethanolamine (MEA) has been a dominant amine applied so far in this context. This study reveals how biological N removal can be achieved even in systems heavily contaminated by MEA in post- as well as pre-denitrification treatment systems, elucidating the rate-limiting factors of nitrification as well as aerobic and denitrifying biodegradation of MEA. The hydrolysis of MEA to ammonia readily occurred both in post- and pre-denitrification treatment systems with a hydraulic retention time of 7 h. MEA removal was ≥99?±?1 % and total nitrogen removal 77?±?10 % in both treatment systems. This study clearly demonstrates the advantage of pre-denitrification over post-denitrification for achieving biological nitrogen removal from MEA-contaminated effluents. Besides the removal of MEA, the removal efficiency of total nitrogen as well as organic matter was high without additional carbon source supplied.     

Hydrophobic Derivatives of Dextran Polysaccharide: Characterization and Properties

This study reports the synthesis and characterization of hydrophobic derivatives of dextran in which long alkyl chains substituted a proportion of the hydroxyl groups. These derivatives were characterized by ¹³C and ¹H NMR and infrared spectroscopy. Information about hydrophobic associations in aqueous solutions was obtained by fluorescence spectroscopy in the presence of pyrene and nabumetone probes. These results, in addition to the swelling‐index data of derivatives, showed that there are perspectives of using them as a starting point for models of drug delivery.     

Contamination of therapeutic human immunoglobulin preparations with apolipoprotein H (β2‐glycoprotein I)

Polyclonal immunoglobulin (Ig) concentrates are important biological medicinal products and the assurance of their quality and safety is crucial. In our present approach we used proteomic methods to check the purity of commercial Ig products of different origin. The experimental setup included nonreducing 2DE or DIGE combined with MALDI‐TOF and the thrombin generation assay, a routine safety test for pharmaceutical Ig preparations, and was complemented by a specific immunoassay. 2DE patterns displayed contaminations with trace amounts of human apolipoprotein H (Apo‐H), transferrin, albumin, and its fragments. In contrast to the latter, Apo‐H is a protein that is active in the coagulation cascade, and thus a potential involvement in thromboembolic events in vivo cannot be excluded. It was found by 2DE and MALDI‐TOF to be a contaminant of several Ig preparations. Spiking experiments of Ig preparations with pure Apo‐H demonstrated an Apo‐H concentration dependent increase in thrombin generation assay values. Traces of Apo‐H are possibly also contributing to unwanted side effects, as already known for factor XIa. The significance of Apo‐H contaminations for these side effects might be verified by detailed analyses of pharmacovigilance data.