New Approaches to Coupling TLC with TOF-SIMS

JPC – Journal of Planar Chromatography – Modern TLC - A new hyphenated technique that enables coupling of thin-layer chromatography (TLC) with time-of-flight secondary-ion mass...     

Asymmetric base-mediated epoxide isomerisation

The base-mediated rearrangement of epoxides into allylic alcohols is a well-known synthetic transformation. The first enantioselective version of the reaction using a chiral base was reported in 1980. Since then, the reaction has received a lot of attention mostly due to the great usefulness of chiral allylic alcohols in organic synthesis. Major breakthroughs in the area were the first report on using a sub-stoichiometric amount of chiral base, and the development of chiral bases for a true catalytic reaction protocol. The present review covers the time from when the first asymmetric epoxide isomerisation reaction was reported (1980) up to now, focusing on the period 1997-2001.     

Peak compression effects in capillary electrochromatography of basic drug substances using a strong cation-exchanger

Peak compression effects in capillary electrochromatography of basic drug substances using a strong cation-exchanger have been studied. Extremely narrow peaks with apparent efficiencies of several million plates per meter could be obtained when the composition of the sample zone differed from that of the mobile phase. The increased efficiencies were predominately observed when the analyte had an elution time similar to that of the electroosmotic flow marker. Peak compression was found to be reproducible and could be obtained for all investigated basic drug substances by altering the composition of the mobile phase in such a way that the analyte co-eluted with the sample zone. An explanation of the observed phenomena is proposed. A sample zone differing in composition from the mobile phase will disturb the equilibrium between the stationary and mobile phase. The elution rate of an analyte will consequently be different when residing inside the sample zone. If the analyte migrates through the sample zone at a higher speed than the rest of the mobile phase and is strongly retained after passing through a boundary in the sample zone, a continuous stacking can be obtained trapping the analyte as a very narrow band.     

Chemical fourling on the unit cell level as a structure-building operation in the solid state

Chemical fourling on the unit-cell level is introduced as a structure-building operation in the solid state. A chemical fourling structure is achieved when two twin planes are perpendicular to each other. Each fourling unit has infinite extension in only one direction and can be related to a well-known structure type or packing of atoms. The structures of the tetragonal tungsten bronzes M_xWO₃ and Pd(NH₃)₄Cl · H₂O are presented as examples of chemical fourlings of cubic close packing. The structures of SeO₂, Mn₂Hg₅, and Zr₂F₇O are shown to be a sequence of chemical fourlings of primitive cubic packing. Chemical fourling units of hexagonal close packing are found in the structures of tetragonal Ti₃Sb, α-V₃S and Sb₆O₇(SO₄)₂. The structures of CuAl₂, SeTl, NbTe₄, Ti₃Sb, and MnU₆ all have the same chemical fourling unit. Cr₂₃C₆ is described as a bounded chemical fourling of cubic close packing.     

In vitro high throughput screening of compounds for favorable metabolic properties in drug discovery

Drug metabolism can have profound effects on the pharmacological and toxicological profile of therapeutic agents. In the pharmaceutical industry, many in vitro techniques are in place or under development to screen and optimize compounds for favorable metabolic properties in the drug discovery phase. These in vitro technologies are meant to address important issues such as: (1) is the compound a potent inhibitor of drug metabolising enzymes (DMEs)? (2) does the compound induce the expression of DMEs? (3) how labile is the compound to metabolic degradation? (4) which specific enzyme(s) is responsible for the compound's biotransformation? and (5) to which metabolites is the compound metabolized? Answers to these questions provide a basis for judging whether a compound is likely to have acceptable pharmacokinetic properties in vivo. To address these issues on the increasing number of compounds inundating the drug discovery programs, high throughput assays are essential. A combination of biochemical advances in the understanding of the function and regulation of DMEs (in particular, cytochromes P450, CYPs) and automated analytical technologies are revolutionizing drug metabolism research. Automated LC-MS based metabolic stability, fluorescence, radiometric and LC-MS based CYP inhibition assays are now in routine use. Automatible models for studying CYP induction based on enzyme activity, quantitative RT-PCR and reporter gene systems are being developed. We will review the utility and limitations of these HTS approaches and highlight on-going developments and emerging technologies to answer metabolism questions at the different stages of the drug discovery process.     

Determination of crude protein in animal feed, forage, grain, and oilseeds by using block digestion with a copper catalyst and steam distillation into boric acid: collaborative study

A collaborative study was conducted to evaluate the repeatability and reproducibility of an extension of AOAC Official Method 991.20, Nitrogen (Crude) in Milk, to animal feed, forage (plant tissue), grain, and oilseed materials. Test portions are digested in an aluminum block at 420 degrees C in sulfuric acid with potassium sulfate and a copper catalyst. Digests are cooled and diluted, and concentrated sodium hydroxide is added to neutralize the acid and make the digest basic; the liberated ammonia is distilled by using steam distillation. The liberated ammonia is trapped in a weak boric acid solution and titrated with a stronger standardized acid, hydrochloric acid; colorimetric endpoint detection is used. Fourteen blind samples were sent to 13 collaborators in the United States, Denmark, Sweden, Germany, and the United Kingdom. Recoveries of nitrogen from lysine, tryptophan, and acetanilide were 86.8, 98.8, and 100.1%, respectively. The within-laboratory relative standard deviation (RSDr, repeatability) ranged from 0.40 to 2.38% for crude protein. The among-laboratories (including within-) relative standard deviation (RSD(R), reproducibility) ranged from 0.44 to 2.38%. It is recommended that the method be adopted First Action by AOAC INTERNATIONAL. A lower concentration (1% H3BO3) of trapping solution was compared with the concentration specified in the original protocol (4% H3BO3) and was found comparable for use in an automatic titration system in which titration begins automatically as soon as distillation starts. The Study Directors recommend that 1% H3BO3 as an optional alternative to 4% boric acid trapping solution be allowed for automatic titrators that titrate throughout the distillation.     

Molecular fluorescence excitation-emission matrices relevant to tissue spectroscopy

In vivo and ex vivo studies of fluorescence from endogenous and exogenous molecules in tissues and cells are common for applications such as detection or characterization of early disease. A systematic determination of the excitation-emission matrices (EEM) of known and putative endogenous fluorophores and a number of exogenous fluorescent photodynamic therapy drugs has been performed in solution. The excitation wavelength range was 250-520 nm, with fluorescence emission spectra collected in the range 260-750 nm. In addition, EEM of intact normal and adenomatous human colon tissues are presented as an example of the relationship to the EEM of constituent fluorophores and illustrating the effects of tissue chromophore absorption. As a means to make this large quantity of spectral data generally available, an interactive database has been developed. This currently includes EEM and also absorption spectra of 35 different endogenous and exogenous fluorophores and chromophores and six photosensitizing agents. It is intended to maintain and extend this database in the public domain, accessible through the Photochemistry and Photobiology website (http://www.aspjournal. com/).     

Simplified micro-method for the quantitative analysis of putrescine, spermidine and spermine in urine

A simplified micro-method for the quantitative analysis of urinary polyamines is described. After acid hydrolysis of urine, the polyamines are converted to fluorescent 1-dimethylaminonaphthalene-5-sulfonyl (Dns; dansyl) derivatives and separated by means of thin-layer chromatography. Dns-NH2, which has been reported to interfere with the determination of putrescine, is well separated from di-Dns-putrescine. Putrescine, spermidine and spermine are quantitated by in situ scanning of their fluorescent spots on the chromatogram. The present method is both sensitive and reproducible. It eliminates a number of time-consuming steps and thus reduces preparative losses. Yet an adequate chromatographic resolution is obtained. Representative polyamine analyses of urine from normal volunteers and from cancer patients are reported. Elevated levels occur in the urines of pregnant women and of patients with various types of cancer.     

Control of lysine reactivity in four-helix bundle proteins by site-selective pKa depression: expanding the versatility of proteins by postsynthetic functionalization

Five 42-residue polypeptides have been designed to fold into hairpin helix-loop-helix motifs that dimerize to form four-helix bundles, and to serve as protein scaffolds for the elucidation at the molecular level of the principles that control and fine-tune lysine and ornithine reactivities in a protein context. Site-selective control of Lys and Orn reactivity provides a mechanism for addressing directly individual residues and is a prerequisite for the site-selective functionalization of folded proteins. Several lysine and one ornithine residues were introduced on the surface and in the hydrophobic core of the folded motif. The reactivity of each residue was determined by measuring the degree of acylation of the trypsin cleaved fragments by HPLC and mass spectrometry. The most reactive residues were Orn34 and Lys19, both of which were located in d positions in the heptad repeat, and therefore in hydrophobic environments. Upon reaction of the helix-loop-helix dimer KA-I with one equivalent of mono-p-nitrophenyl fumarate, Orn34 was acylated approximately three times more efficiently than Lys19, whereas Lys10 (b position), Lys15 (g position), and Lys33 (c position) remained unmodified. In the sequence KA-I-A(15) Lys15 was replaced by an alanine residue and the selectivity of Orn34 over Lys19 increased to approximately a factor of six, probably because Lys15 had the capacity to reduce the pK(a) value of Lys19 and 85 % of site-selectively monoacylated product was obtained. The pH dependence of the acylation reaction was determined and showed that the pK(a) of the reactive residues were 9.3, more than a pK(a) unit below the magnitude of the corresponding residue in a solvent exposed position. Introducing Lys and Orn residues into a or d positions of the heptad repeat therefore serves as a mechanism of depressing their pK(a) to increase their reactivity site selectively. Extensive NMR and CD spectroscopic analyses showed that the sequences fold according to prediction.     

Efficient sample pre-concentration of bupivacaine from human plasma by solid-phase extraction on molecularly imprinted polymers

The ability to use imprinted polymers for solid-phase extraction is demonstrated in a model pre-concentration of bupivacaine from human plasma samples prior to gas chromatography. Imprinting of the structural analogue pentycaine yielded a sorbent which efficiently extracted analyte and internal standard, while possible interference on analyte quantification from leakage of remaining template molecules was eliminated. Human plasma samples were diluted with citrate buffer pH 5, and applied onto solid phase extraction columns containing 15 mg of imprinted sorbent. Wash steps with 20% methanol in water followed by acetonitrile preceded elution with 2% triethylamine in acetonitrile. A direct comparison with conventional sample pre-treatment methods showed the high selectivity of the imprinted sorbent resulted in distinctly cleaner chromatographic traces than were obtained both after liquid-liquid extraction and C18-based solid-phase extraction.