Angular correlation functions of symmetric-top molecules influenced by coriolis coupling

The influence of the Coriolis coupling on the angular autocorrelation functions (ACF's) of symmetric-top molecules is calculated starting with the angular ACF's given by St. Pierre and Steele. As an example the theoretical ACF of the v₄ transition of CHCl₃ is compared with the experiment.     

Double cyclisation of phenylglycine-o-carboxylic acids—I: New stable mesoionic oxazolones

Remarkably stable mesoionic oxazolones possessing an oxazolo[3,2-a]quinolinium structure (5a–b),8,16, 17) were obtained by the double cyclisation of phenylglycine-o-carboxylic acids (3a–c) in refluxing acetic anhydride or in benzoic anhydride at 140°, The 0-Ac group was eliminated to give the corresponding lactones (6a–b) or replaced by O-Ts (7). IR stretching vibrations of the endo-carbonyl were in the range 1710–1768 cm^?1, while v_1-CH exhibited unusually high values (3159–3194 cm^-1). 1-Acyl derivatives could be obtained only with TFAA (23–24), although easy deuteration of the same position took place in the presence of traces of trifluoroacetic acid. Hydrolysis of 5b led to the α-quinolone-N-acetic acid 27a. In the case of 5a, hydrolysis was accompanied by self-acylation of the nucleophilic site at C-4 with formation of a dimeric acid 28a. The presence of an additional Me group in phenylalanine-o-carboxylic acid (36) activates the corresponding mesoionic oxazolone 37 so that 1-acylation becomes possible with formation of the fused oxazole 38 by the Dakin-West reaction. Temperature dependent magnetic non-equivalence of methylene protons has been observed in acids 3b-d and f and also in the 7-membered anhydride 48b.     

Absolute Rate Constants for the Addition of the 1‐(tert‐Butoxy)carbonylethyl Radical onto Cyclic Alkenes in Solution

Absolute rate constants are reported for the addition of the 1‐[(tert‐butoxy)carbonyl]ethyl (= 2‐(1,1‐dimethylethoxy)‐1‐methyl‐2‐oxoethyl) radical ^.CHMeCO₂(t‐Bu) to several cyclic and monosubstituted alkenes in MeCN as obtained by time‐resolved electron paramagnetic resonance (EPR). The activation energies for the addition of this alkyl radical are mainly governed by the addition enthalpy but are also substantially lowered by the ambiphilic effect and by relief of cyclic strain.     

Extraktion von 3d-Metallionen mit zweizähligen Sulfonamiden. I. Liganden mit Schwefel bzw. heterocyclisch gebundenem Stickstoff als zweitem Haftatom

Extraction of 3d-Metal Ions by Bidendate Sulfonamides. I. Ligands with Sulfur or Heterocyclic Nitrogen as a Second Donor Atom The properties of 2-acetylpyridine-p-toluensulfonylhydrazone (APSH - H), arensulfonylthioureas (I), and the esters of arensulfonylmonothiocarbamic acid (II) or arensulfonyldithiocarbamic acid (III) as extractants for the late 3d-metal ions are proved. APSH-H is comparable to the proprietary extractant LIX 34. But, because of the special structure of the corresponding 1,2-chelates, the pH_1/2-values of nickel(II) and cobalt(II) are ≈2 units lower. The pK_s-values, measured in dioxane-water mixtures (75 per cent v/v), increase in the order III < II < I. In aqueous solutions compounds of type III are acids of medium strength. In the case of compounds of type I the substituents of the non-sulfonated nitrogen have a strong influence on the pK_s-values (ΔpK_s = 4.6). Among the late 3d-elements, the ligands II and III extract only copper(II) (pH_1/2 ～2.7 or ～1.6), the ligands I extract zinc(II), cobalt(II), and nickel(II) as well, but not iron(II) and iron(III). The reasons of this unique behaviour are discussed.     

BRCA1 mutation screening using restriction endonuclease fingerprinting-single-strand conformation polymorphism in an automated capillary electrophoresis system

Efficient mutation scanning techniques are needed for the rapid detection of novel disease-associated mutations and rare-sequence variants of putative importance. The large size of the breast cancer 1 gene (BRCA1) and the many mutations found throughout its entire coding sequence make screening for mutations in this gene particularly challenging. We have developed a method for screening exon 11 of the BRCA1 gene based on restriction enzyme digestion of fluorescence-labeled polymerase chain reaction (PCR) products followed by single-strand conformation polymorphism (SSCP) using an automated capillary electrophoresis system, denoted capillary restriction endonuclease fingerprinting (REF)-SSCP electrophoresis. Using this strategy on a control set of samples, we were able to detect 17 of 18 known sequence alterations. The method was then applied to screen 73 Norwegian females with family histories of breast and/or ovarian cancer. A total of 172 sequence alterations were detected, including substitutions, insertions, and deletions. One novel substitution of unknown function was identified. Sequencing of all samples negative in the capillary REF-SSCP system gave no additional mutations confirming the high sensitivity of the described methodology. Capillary REF-SSCP electrophoresis appeared as a technically convenient technique, requiring amplification of fewer PCR fragments than traditional SSCP. The novel strategy allows high-throughput mutation scanning without radioactive labeling and polyacrylamide gel electrophoresis (PAGE).     

Extraktion von alkali- und erdalkalimetallionen mit (sym-dibenzo-14-krone-4-oxy)- und (sym-dibenzo-16-krone-5-oxy)-carbonsäuren

(Extraction of alkali on alkaline earth metal ions with (sym-dibenzo-14-crown-4-oxy)- and (sym-dibenzo-16-crown-5-oxy)-carboxylic acids.)The extraction of lithium, sodium, potassium, calcium and some other metal ions with dibenzo-4-crown-4-oxy- and dibenzo-16-crown-5-oxycarboxylic acids containing the groups -CH₂COOH, -(CH₂)₂COOH, -(CH₂)₃COOH, -CH(C₂H₅)COOH and -CH(C₄H₉)COOH was studied. The extraction increases as a function of the lipophilic character of the carboxylic acid group. Calcium, barium and strontium ions are better extracted than Li⁺, Na⁺ and K⁺; there are only small differences among the alkaline earth metal ions. Evaluated from the extraction data, the composition of the extracted species was 1:1 (metal/ligand) for Li⁺, and 1:2 for CaCa²⁺; Na⁺ and K⁺ favour the formation of 1:2 complexes with dibenzo-14-crown-4-derivatives bbut 1:1 complexes with dibenzo-16-crown-5-oxy-carboxylic acids. The dependence of the distribution ratio on pH does not provide unequivocal evidence for the composition of the extracted compounds.     

Infrared-optical properties of vapour-deposited metal films

Spectroscopic infrared ellipsometry was applied to determine the optical constants of thin metal layers deposited on dielectric substrates such as glass or CaF(2). The layers were produced by evaporating gold or silver in a vacuum, and the coverage, that is the deposited mass per area, was chosen in the range 80-1200 mg m(-2) for gold, which refers to thicknesses in the lower nanometer range; in the case of the specifically lighter silver, about half the coverage was applied. At low coverage a metal island structure is obtained, which gives rise to surface-enhanced infrared absorption (SEIRA). Depending on the coverage, the deposited films exhibit either dielectric or metallic optical properties. Atomic force microscopy and conductivity measurements complement the spectroscopic observation.     

Simulation of 59Co NMR chemical shifts in aqueous solution

59Co chemical shifts were computed at the GIAO-B3LYP level for [Co(CN)6]3-, [Co(H2O)6]3+, [Co(NH3)6]3+, and [Co(CO)4]- in water. The aqueous solutions were modeled by Car-Parrinello molecular dynamics (CPMD) simulations, or by propagation on a hybrid quantum-mechanical/molecular-mechanical Born-Oppenheimer surface (QM/MM-BOMD). Mean absolute deviations from experiment obtained with these methods are on the order of 400 and 600 ppm, respectively, over a total delta(59Co) range of about 18,000 ppm. The effect of the solvent on delta(59Co) is mostly indirect, resulting primarily from substantial metal-ligand bond contractions on going from the gas phase to the bulk. The simulated solvent effects on geometries and delta(59Co) values are well reproduced by using a polarizable continuum model (PCM), based on optimization and perturbational evaluation of quantum-mechanical zero-point corrections.     

Resolution of seven-coordinate complexes

The crystal structures of [Pr(dbm)3H2O] (1), [Sm(dbm)3H2O] (2), and [Er(dbm)3H2O] (3) have been determined (dbm=dibenzoylmethane). They display seven-coordinate propeller-shaped molecules, which are chiral and crystallize as conglomerates in space group R3. Analysis of the crystal structures reveals supramolecular interactions, including formation of a quadruple helix, which explain how stereochemical information can be transferred between stacks of molecules. A method to quantify the ee in bulk samples of stereochemically labile compounds by using solid-state CD spectroscopy is described. Using this method, it has been shown that compounds 1-3 undergo total spontaneous resolution directly after synthesis, forming a microcrystalline reaction product that is essentially enantiopure. The resolution of bulk quantities of seven-coordinate complexes (without chiral or polydentate ligands) is thus reported for the first time. Because the crystallization starts without seeding, the overall preparation may be regarded as absolute asymmetric synthesis.     

On-line coupling of supercritical fluid extraction with high-performance liquid chromatography for the determination of explosives in vapour phases

An investigation into the selectivity of an iminodiacetic acid (IDA) modified silica gel column for transition and heavy metal ions using non-chelating inorganic eluents has been carried out. A number of eluent parameters were investigated to determine the exact retention mechanism taking place and to control selectivity. The parameters studied were eluent ionic strength and the nature of the inorganic salt used, eluent pH and eluent temperature. The results obtained showed how despite certain metal ions exhibiting similar stability constants with the bonded IDA groups, careful control of each of the above parameters, in particular eluent chloride ion concentration and eluent temperature, could result in large changes in selectivity. Optimal conditions for the isocratic and gradient separation of Mg(II), Ca(II), Mn(II), Cd(II), Co(II), Zn(II) and Pb(II) were determined. An isocratic method using a 0.035 M KCl, 0.065 M KNO3 (pH 2.5) eluent was successfully applied to the determination of Mn(II), Cd(II), Co(II) and Zn(II) at concentrations between 20 and 121 microg/l in a freshwater certified reference material (NIST 1640).