Bestimmung des germaniums mit hilfe eines radioaktiven germaniumisotops

Microchimica Acta - Die Überprüfung eines Analysenganges auf Germanium wurde mit Hilfe von radioaktivem Germanium 71 durchgeführt. Es zeigte sich, daß der Analysengang nicht...     

Regioselective intramolecular ring closure of 2-amino-6-bromo-2,6-dideoxyhexono-1,4-lactones to 5- or 6-membered iminuronic acid analogues: synthesis of 1-deoxymannojirimycin and 2,5-dideoxy-2,5-imino-D-glucitol

1-Deoxymannojirimycin (8c) was synthesised from 2-amino-6-bromo-2,6-dideoxy-D-mannono-1,4-lactone (7) by intramolecular direct displacement of the C-6 bromine employing non-aqueous base treatment followed by reduction of the intermediate methyl ester. Likewise, using aqueous base at pH 12, ring closure took place by 5-exo attack on the 5,6-epoxide leading to 2,5-dideoxy-2,5-imino-L-gulonic acid (9b), which was reduced to 2,5-dideoxy-2,5-imino-D-glucitol (9b). The method was further applied to 2-amino-6-bromo-2,6-dideoxy-D-galacto- as well as D-talo-1,4-lactones (14 and 15). However, only the corresponding six-membered ring 1,5-iminuronic acid mimetics, namely (2R,3R,4S,5R)-3,4,5-trihydroxypipecolic acid (2,6-dideoxy-2,6-imino-D-galactonic acid, 16) and (2S,3R,4S,5R)-3,4,5-trihydroxypipecolic acid (2,6-dideoxy-2,6-imino-D-talonic acid, 17), were obtained. The corresponding enantiomers, L-galacto- as well as L-talo-2-amino-6-bromo-2,6-dideoxy-1,4-lactones ent-14 and ent-15, reacted accordingly to give the D-galacto- and L-altro-1,5-iminuronic acid mimetics, (2S,3S,4R,5S)-3,4,5-trihydroxypipecolic acid (2,6-dideoxy-2,6-imino-L-galactonic acid, ent-16) and (2R,3S,4R,5S)-3,4,5-trihydroxypipecolic acids (2,6-dideoxy-2,6-imino-L-talonic acid, ent-17), respectively.     

Isoelectronic caesium compounds: the triphosphenide Cs[tBu3SiPPPSitBu3] and the enolate Cs[OCH=CH2

The caesium triphosphenide Cs[tBu3SiPPPSitBu3] was accessible from the reaction of CsF with the sodium triphosphenide Na[tBu3SiPPPSitBu3] in tetrahydrofuran at room temperature. In contrast to the preparation of tetrahydrofuran-solvated silanides M[SitBu3] (M = Li, Na, K), our efforts to synthesize the caesium silanide Cs[SitBu3] as a tetrahydrofuran complex failed. When tBu3SiBr was treated with an excess of caesium metal in tetrahydrofuran at room temperature, the caesium enolate Cs[OCH=CH2] and the supersilane tBu3SiH formed rather than the silanide Cs[SitBu3]. X-Ray quality crystals of the enolate Cs[OCH=CH2] (orthorhombic, Pnma) were obtained from tetrahydrofuran at ambient temperature. In contrast to the structures of its homologues M[tBu3SiPPPSitBu3] (M = Na, K), the caesium triphosphenide Cs[tBu3SiPPPSitBu3] features a polymer in the solid state (orthorhombic, Cmcm).     

Iron(II) complexes with bio-inspired N,N,O ligands as oxidation catalysts: olefin epoxidation and cis-dihydroxylation

The Rieske dioxygenases are a group of non-heme iron enzymes, which catalyze the stereospecific cis-dihydroxylation of its substrates. Herein, we report the iron(II) coordination chemistry of the ligands 3,3-bis(1-methylimidazol-2-yl)propionate (L1) and its neutral propyl ester analogue propyl 3,3-bis(1-methylimidazol-2-yl)propionate (PrL1). The molecular structures of two iron(II) complexes with PrL1 were determined and two different coordination modes of the ligand were observed. In [Fe(II)(PrL1)(2)](BPh(4))(2) (3) the ligand is facially coordinated to the metal with an N,N,O donor set, whereas in [Fe(II)(PrL1)(2)(MeOH)(2)](OTf)(2) (4) a bidentate N,N binding mode is found. In 4, the solvent molecules are in a cis arrangement with respect to each other. Complex 4 is a close structural mimic of the crystallographically characterized non-heme iron(II) enzyme apocarotenoid-15-15'-oxygenase (APO). The mechanistic features of APO are thought to be similar to those of the Rieske oxygenases, the original inspiration for this work. The non-heme iron complexes [Fe(II)(PrL1)(2)](OTf)(2) (2) and [Fe(II)(PrL1)(2)](BPh(4))(2) (3) were tested in olefin oxidation reactions with H(2)O(2) as the terminal oxidant. Whereas 2 was an active catalyst and both epoxide and cis-dihydroxylation products were observed, 3 showed negligible activity under the same conditions, illustrating the importance of the anion in the reaction.     

Oligo(p-phenylenevinylene)-peptide conjugates: synthesis and self-assembly in solution and at the solid-liquid interface

Two oligo(p-phenylenevinylene)-peptide hybrid amphiphiles have been synthesized using solid- and liquid-phase strategies. The amphiliphiles are composed of a pi-conjugated oligo(p-phenylenevinylene) trimer (OPV) which is coupled at either a glycinyl-alanyl-glycinyl-alanyl-glycine (GAGAG) silk-inspired beta-sheet or a glycinyl-alanyl-asparagyl-prolyl-asparagy-alanyl-alanyl-glycine (GANPNAAG) beta-turn forming oligopeptide sequence. The solid-phase strategy enables one to use longer peptides if strong acidic conditions are avoided, whereas the solution-phase coupling gives better yields. The study of the two-dimensional (2D) self-assembly of OPV-GAGAG by scanning tunneling microscopy (STM) at the submolecular level demonstrated the formation of bilayers in which the molecules are lying antiparallel in a beta-sheet conformation. In the case of OPV-GANPNAAG self-assembled monolayers could not be observed. Absorption, fluorescence, and circular dichroism studies showed that OPV-GAGAG and OPV-GANPNAAG are aggregated in a variety of organic solvents. In water cryogenic temperature transmission electron microscopy (cryo-TEM), atomic force microscopy (AFM), light scattering, and optical studies reveal that self-assembled nanofibers are formed in which the helical organization of the OPV segments is dictated by the peptide sequence.     

Length exclusion in the adsorption of chain molecules on chabazite type zeolites

In the adsorption of linear C1-C8 alkanes, alkenes and alcohols on zeolite chabazite, molecules smaller than 6.7 A are adsorbed in significant amounts, whereas longer chains are almost fully excluded from the micropores.     

Comparison of chromatographic ion-exchange resins VI. Weak anion-exchange resins

A comparative study on weak anion exchangers was performed to investigate the pH dependence, binding strength, particle size distribution, and static and dynamic capacity of the chromatographic resins. The resins tested included: DEAE Sepharose FF, Poros 50 D, Fractogel EMD DEAE (M), MacroPrep DEAE Support, DEAE Ceramic HyperD 20, and Toyopearl DEAE 650 M. Testing was performed with five different model proteins: Anti-FVII mAb (immunoglobulin G), aprotinin, bovine serum albumin (BSA), Lipolase (Novozymes), and myoglobin. Retention showed an expected increasing trend as a function of pH for proteins with low pI. A decrease in retention was observed for some resins at pH 9 likely due to initiation of deprotonation of the weak anion-exchange ligands. Expected particle size distribution was obtained for all resins compared to previous studies. Binding strength to weak anion-exchange resins as a function of ionic strength depends on the specific protein. Binding and elution at low salt concentration may be performed with Toyopearl DEAE 650 M, while binding and elution at high salt concentration may be performed with MacroPrep DEAE Support. Highest binding capacities were generally obtained with Poros 50 D followed by DEAE Ceramic HyperD 20. A general good agreement was obtained between this study and data obtained by the suppliers. Verification of binding strength trends with model proteins was achieved with human growth hormone (hGH) and a hGH variant on the same resins with different elution salts, sodium chloride, sodium hydrogenphosphate, sodium sulphate, and sodium acetate. Static capacity measurements obtained in the traditional experimental set-up were compared with high-throughput screening (HTS) technique experiments with reasonable agreement. Isotherm data obtained from HTS techniques and pulse experiments were successfully combined with mathematical modelling to simulate, develop and optimise the separation process of two model proteins, Lipolase and BSA. The data presented in this paper may be used for selection of resins for testing in process development.     

Lambda-type regioregular oligothiophenes: synthesis and second-order NLO properties

The synthesis of a new series of Lambda-type, D-Pi-A regioregular oligothiophenes is described. The simultaneous presence of the chiral centers and the Lambda-type structure disfavored the formation of centro-symmetrical dimeric assemblies. Hence, enhanced first hyperpolarizabilities betaHRS were measured in comparison with those of the corresponding monomers.     

Manifestation of spinodal decomposition in oscillatory shear measurements

The linear dynamic moduli of a PαMSAN/PMMA blend have been measured during spinodal decomposition and the subsequent coarsening of the co‐continuous morphology. The feasibility of probing this morphology development by rheological measurements has been investigated. During phase separation, the storage modulus shows a power law behaviour at low frequency and its value decreases as time proceeds. However, effects of the dynamic measurement on the morphology development have been observed, even for strain amplitudes as low as 0.01. This effect of oscillatory shear on the coarsening of a co‐continuous structure is consistent with the predictions of the Doi‐Ohta theory.     

Influencing polymer properties by regiospecific complexation

ABA block-copolymers in which the A segments are capable of forming complexes and B is a non-complexing segment, have been used to prepare polymer materials with properties that can be changed by adding a complexing agent. The complex forming segments were poly(ethylene oxide) (PEO), linear polyethylenimine (LPEI) and poly(N-tert-butylethylenimine) (PTBEI). Commercially available liquid ABA block-copolymers, in which A is PEO and B is poly(propylene oxide), were investigated with high molar mass poly(acrylic acid) (PAA) as the complexing agent for PEO. It was found that the mixtures containing 3 to 7 wt.-% of PAA, showed a marked shear-thickening behavior leading eventually to gelation. This was attributed to the transformation of intramolecular polymer complexes, at low shear rates, to intermolecular complexes, at high shear rates, due to the chain stretching of PAA. ABA copolymers in which A is LPEI or PTBEI and B polytetra-hydrofuran (PTHF), were prepared. Complexation of these copolymers with low molecular weight poly-acids or PAA in polar and non-polar solvents as well as in bulk have been investigated. ABA copolymers in which A is PEO and B a PTHF segment were prepared. These block-copolymers show two melting points: one at appr. 55°C, due to the PEO segments, and one at appr. 30°C due to the PTHF. Upon addition of alkali metal salts such as sodium iodide or sodium thiocyanate, complexes with PEO are formed and as a consequence, the melting point of the PEO segments shifts to appr. 160°C. The complexed materials behave as thermoplastic elastomers up to that temperature.