Infinite Gold Zig‐Zag Chains as Structural Motif in Ca3Au3In – A Ternary Ordered Variant of the Ni4B3 Type

New auride Ca₃Au₃In was synthesized from the elements in a sealed tantalum tube in a high‐frequency furnace. Ca₃Au₃In was investigated by X‐ray powder and single crystal diffraction: ordered Ni₄B₃ type, Pnma, a = 1664.1(6), b = 457.3(2), c = 895.0(3) pm, wR2 = 0.0488, 1361 F² values, and 44 variables. The three crystallographically independent boron positions of the Ni₄B₃ type are occupied by the gold atoms, while the four nickel sites are occupied by calcium and indium in an ordered manner. All gold atoms have trigonal prismatic coordination, i.e. Ca₆ prisms for Au1 and Au2 and Ca₄In₂ prisms for Au3. While the Au3 atoms are isolated, we observe Au1–Au1 and Au2–Au2 zig‐zag chains at Au–Au distances of 292 and 284 pm. These slabs resemble the CrB type structure of CaAu. Consequently Ca₃Au₃In can be considered as a ternary auride. Together the Au2, Au3 and indium atoms build up a three‐dimensional [Au₂In] polyanionic network (281–293 pm Au–In) in which the chains of Au1 centered trigonal prisms are embedded. The crystal chemical similarities with the structures of Ni₄B₃, CaAuIn, and CaAu are discussed.     

Dendritic aliphatic polyethers as high-loading soluble supports for carbonyl compounds and parallel membrane separation techniques

This paper describes the use of dendritic polyglycerol as a new high-loading polymeric support. The soluble polyether skeleton allows the parallel synthesis of small libraries on a large scale (1-5 mmol). Purification of polymer-bound products is easily achieved by a parallel dialysis apparatus, which was developed to separate up to 12 reaction mixtures simultaneously. The terminal 1,2-diol groups of polyglycerol (loading capacity: 4.1 mmol diol/g) can be directly coupled with carbonyl compounds without additional linker groups. At the same time the polyglycerol support acts as a polymeric ketal protecting group. The coupling of the carbonyl compounds occurs in high yields, and effective loading capacities of up to 3.5 mmol of ketone/g can be reached. The obtained polymeric acetals can easily be characterized by standard analytical techniques, such as NMR, IR, UV, and SEC. The versatility of this new polymeric support for solution-phase organic synthesis is demonstrated by two efficient polymer-supported syntheses: nucleophilic substitutions of gamma-chloroketones with amines and Suzuki-coupling on p-bromobenzaldehyde. The acid-catalyzed acetal cleavage with a solid-phase acidic ion-exchange resin in methanol demonstrates the orthogonal use of these soluble polymeric supports with conventional solid-phase reagents. Cleavage of products occurs in high yields, and almost complete recovery (>95%) of the polyglycerol support has been demonstrated after phase separation or ultrafiltration.     

Magnetic and Electrical Properties, Eu Mössbauer Spectroscopy, and Chemical Bonding of REAgMg (RE=La, Ce, Eu, Yb) and EuAuMg

Single-phase samples of REAgMg (RE=La, Ce, Eu, Yb) and EuAuMg were prepared by reacting the elements in sealed tantalum tubes in a high-frequency furnace. LaAgMg and CeAgMg adopt the hexagonal ZrNiAl-type structure, while EuAgMg, YbAgMg, and EuAuMg crystallize with the orthorhombic TiNiSi type. Chemical bonding was exemplarily investigatedfor EuAgMg and EuAuMg on the basis of TB-LMTO-ASAcalculations. Magnetic susceptibility measurements indicatePauli paramagnetism for LaAgMg and YbAgMg with room-temperature susceptibilities of 2.4(1)×10⁻⁹ and 1.5(1)×10⁻⁹ m³/mol, respectively. CeAgMg remains paramagnetic down to 2 K. The experimental magnetic moment of 2.52(2) μ_B/Ce above 50 K is compatible with trivalent cerium. EuAgMg and EuAuMg are paramagnetic above 50 K with experimentalmagnetic moments of 7.99(5) μ_B/Eu for the silver and 7.80(5) μ_B/Eu for the gold compound, indicating divalent europium. Ferromagnetic ordering is detected at T_C=22.0(3) K (EuAgMg) and T_C=36.5(5) K (EuAuMg). At 4.2 K and 5 T the saturation magnetizations are 7.1(1) and 7.3(1) μ_B/Eu for EuAgMg and EuAuMg, respectively. According to the very small hysteresis, EuAgMg and EuAuMg may be classified as soft ferromagnets. All compounds are metallic conductors. For EuAgMg and EuAuMg freezing of spin-disorder scattering is observed below T_C. At 78 K ¹⁵¹Eu Mössbauer spectra show isomer shifts of −9.00(4) and −8.72(8) mm/s for EuAgMg and EuAuMg, respectively. Full magnetic hyperfine field splitting is detected at 4.2 K with hyperfine fields of 17.4(1) and 18.3(2) T at the europium nuclei of EuAgMg and EuAuMg.     

Decomposition of EuPdIn and EuPtIn at high temperature and high pressure—formation of the hexagonal Laves phases EuPd0.72In1.28 and EuPt0.56In1.44

EuPd_0.72In_1.28 and EuPt_0.56In_1.44 were prepared under multianvil high-pressure (10.5 GPa) high-temperature (1500 and 1400 K) conditions from the precursor compounds EuPdIn and EuPtIn. They were investigated by X-ray diffraction on both powders and single crystals: MgZn₂-type, space group P6₃/mmc, a=578.7(1) pm, c=944.9(3) pm, wR2=0.0734, 263 F² values for EuPd_0.72In_1.28 and a=591.1(2) pm, c=933.8(2) pm, wR2=0.0853, 151 F² values for EuPt_0.56In_1.44 with 13 variable parameters per refinement. Both structures are built up from face- and corner-sharing tetrahedra of palladium (platinum) and indium atoms. The europium cations are located in cavities within the three-dimensional [Pd_0.72In_1.28] and [Pt_0.56In_1.44] networks. The 2a and 6 h positions of the tetrahedral networks show mixed Pd/In and Pt/In occupancy in EuPd_0.72In_1.28 and EuPt_0.56In_1.44, respectively. The crystal chemistry of these indides is briefly discussed.     

Direct fission versus sequential evaporation mechanism of sputtered caesium iodide cluster ions

A triple stage hybrid mass spectrometer was scanned for the trapping of the reaction intermediates of the over-all loss of two CsI-moieties from size-selected caesium iodide cluster ions of the general formula Cs (CsI)⁺ _n . In addition to appropriate MS/MS/MS-methods an electrically floated collision cell has been applied to trap intermediates of unimolecular and collision-induced evaporations. In comparison with other experimental findings the features of the evaporation mechanism are discussed.     

Computer-Assisted Solution of Chemical Problems—The Historical Development and the Present State of the Art of a New Discipline of Chemistry

The topic of this article is the development and the present state of the art of computer chemistry, the computer-assisted solution of chemical problems. Initially the problems in computer chemistry were confined to structure elucidation on the basis of spectroscopic data, then programs for synthesis design based on libraries of reaction data for relatively narrow classes of target compounds were developed, and now computer programs for the solution of a great variety of chemical problems are available or are under development. Previously it was an achievement when any solution of a chemical problem could be generated by computer assistance. Today, the main task is the efficient, transparent, and non-arbitrary selection of meaningful results from the immense set of potential solutions—that also may contain innovative proposals. Chemistry has two aspects, constitutional chemistry and stereochemistry, which are interrelated, but still require different approaches. As a result, about twenty years ago, an algebraic model of the logical structure of chemistry was presented that consisted of two parts: the constitution-oriented algebra of be- and r-matrices, and the theory of the stereochemistry of the chemical identity group. New chemical definitions, concepts, and perspectives are characteristic of this logic-oriented model, as well as the direct mathematical representation of chemical processes. This model enables the implementation of formal reaction generators that can produce conceivable solutions to chemical problems—including unprecedented solutions—without detailed empirical chemical information. New formal selection procedures for computer-generated chemical information are also possible through the above model. It is expedient to combine these with interactive methods of selection. In this review, the Munich project is presented and discussed in detail. It encompasses the further development and implementation of the mathematical model of the logical structure of chemistry as well as the experimental verification of the computer-generated results. The article concludes with a review of new reactions, reagents, and reaction mechanisms that have been found with the PC-programs IGOR and RAIN.     

Simultaneous serum desalting and total protein determination by macroporous reversed-phase chromatography

Macroporous reversed-phase (mRP) chromatography was successfully used to develop an accurate and precise method for total protein in serum. The limits of detection (0.83 μg, LOD) and quantification (2.51 μg, LOQ) for the mRP method are comparable with those of the widely used micro BCA protein assay. The mRP method can be used to determine the total protein concentration across a wide dynamic range by detecting chromatographic peaks at 215 nm and 280 nm. The method has the added advantage of desalting and denaturing proteins, leading to more complete digestion by trypsin and to better LC–MS–MS identification in shotgun proteomics experiments.