Fabrication and characterization of high-temperature microreactors with thin film heater and sensor patterns in silicon nitride tubes

In this paper the fabrication and electrical characterization of a silicon microreactor for high-temperature catalytic gas phase reactions, like Rh-catalyzed catalytic partial oxidation of methane into synthesis gas, is presented. The microreactor, realized with micromachining technologies, contains silicon nitride tubes that are suspended in a flow channel. These tubes contain metal thin films that heat the gas mixture in the channel and sense its temperature. The metal patterns are defined by using the channel geometry as a shadow mask. Furthermore, a new method to obtain Pt thin films with good adhesive properties, also at elevated temperatures, without adhesion metal is implemented in the fabrication process. Based on different experiments, it is concluded that the electrical behaviour at high temperatures of Pt thin films without adhesion layer is better than that of Pt/Ta films. Furthermore, it is found that the temperature coefficient of resistance (TCR) and the resistivity of the thin films are stable for up to tens of hours when the temperature-range during operation of the microreactor is below the so-called "burn-in" temperature. Experiments showed that the presented suspended-tube microreactors with heaters and temperature sensors of Pt thin films can be operated safely and in a stable way at temperatures up to 700 degrees C for over 20 h. This type of microreactor solves the electrical breakdown problem that was previously reported by us in flat-membrane microreactors that were operated at temperatures above 600 degrees C.     

Säurekatalysierte Umlagerungen von 1,5-Dimethyl-6-methyliden-tricyclo[3.2.1.02,7]oct-3-en-8endo-olen

Acid Catalysed Rearrangement of 1,5-Dimethyl-6-methyliden-tricyclo[3.2.1.0^2,7]oct-3-en-8endo-ols The tricyclic alcohols 2,3,4 and 6 (Scheme 1) are synthesized by the reaction of the tricyclic ketone 1 with sodiumborohydrid or metalloorganic reagents. Their configuration at C(8) is determined by NMR. in the presence of Eu(fod)₃. The exo-attack of 1 by the nucleophil forming the endo-alcohol is favored, the π-electrons of C(3) = C(4) hindering the endo-attack. On treatment with sulfuric acid in dioxane/water at 25° the tertiary alcohols yield aryl-substituted ketones. 3 gives in 78.5% yield a mixture of the 3-(dimethylphenyl)-2-butanones 12 and 13 , in addition to 16.5% of (2,3,4-trimethylphenyl)-2-propanon ( 14 ) (Scheme 2). The alcohols 4 and 6 yield mixtures of the 2-(dimethylphenyl)-3-pentanones 19 and 20 (72%), and 2-(dimethylphenyl)-propiophenones 21 and 22 (68%), respectively (Scheme 2). In the case of the secondary alcohol 2 mainly products derived from hydration at the C(6), C(9) double bond are formed, namely the mixture of diols 23 and 24 (21%), and the mixture of the isomeric 2-(dimethylphenyl)propanals 25, 26 and 27 (3%) (Scheme 3). - The structures of 12–14, 19/20, 21/22, 23/24 and 25/26/27 were established by spectroscopic data. In the case of 12 and 13 the degradation of their mixture to the known 1-(dimethylphenyl)ethanols 17/18 confirmed the assignment. - The most probable mechanism for the rearrangement of 3 is shown in Schemes 4 and 5. The reaction proceeds from 3 through a, b and g to 12 and 13; 14 is formed via e, f and i . In the case of 4 and 6 only the reaction analogue to 3 → a → b → g ?12/13 takes place. The isomeric aldehyds 25–27 formed from 2 could have the structures s, t , and v . The former two could be generated in a similar way as 12/13 from 3 , the latter one as shown in Scheme 8.     

Über die Carotinoide Flavoxanthin und Chrysanthemaxanthin: 1H-NMR.-, 13C-NMR.- und Massen-Spektren und absolute Konfiguration. (Kritische Überprüfung veröffentlichter chemischer und physikalischer Daten)

On the Carotenoids Flavoxanthin and Chrysanthemaxanthin: ¹H-NMR., ¹³C-NMR. and Mass Spectra, Absolute Configuration, Survey of Published Data Very pure flavoxanthin ( 1 ) and chrysanthemaxanthin ( 2 ) have been reisolated from flower heads of Taraxacum officinale. Both compounds were characterized by chromatographic, chemical and chiroptical data and extensive NMR. measurements. Examination of many published data on 1 and 2 led to the conclusion that flavoxanthin has often been mistaken for chrysanthemaxanthin and vice versa. Chemical degradation of 1 and 2 to (?)-loliolide ( 5 ) coupled with NMR. evidence (ASIS, spin-decoupling, NOE) allowed the assignment of the absolute configurations of 1 and 2 . Thus (+)-flavoxanthin is (3S,5R,8R, 3′R,6′R)-5, 8-epoxy-5, 8-dihydro-β, ε-carotene-3, 3′-diol and (+)-chrysanthemaxanthin its C(8)-epimer.     

Investigations on the conditional kinetic and thermodynamic stability of aquatic humic substance-metal complexes by means of EDTA exchange, ultrafiltration and atomic spectrometry

The conditional metal availability and the kinetic stability of humic substance-metal species in humic-rich waters (e.g. bog water) was characterized by means of EDTA exchange. For this purpose a combined procedure consisting of time-controlled ligand exchange by EDTA, species differentiation by a fast single-stage tangential-flow ultrafiltration (TF-UF) technique (cut-off 1 kDa) and sensitive atomic spectrometry methods (e.g. AAS, ICP-OES, TXRF) was developed. The kinetics and the yield of the EDTA exchange served as operational parameters for assessing the kinetic stability and EDTA availability of HS-metal species, respectively. Considerable fractions of natural HS-metal species studied were shown to be EDTA-inert (e.g. 31% of the total Fe, 44% of the total Al) even after long reaction times (48 h), in contrast to artificial ones formed in solutions of isolated HS. Moreover, the conditional thermodynamic stability of HS-metal complexes formed by successive loading of an aquatic reference HS (HO14) with a number of heavy metal ions (e.g. Cr(III), Cu(II), Fe(III), Mn(II), Zn(II)) was also evaluated discriminating the free metal concentrations by means of TF-UF. In addition, from the loading isotherms obtained conditional complexation capacities could be derived for the studied HS exhibiting the order Fe(III)>Cu(II)>Cr(III)>Co(II)>Mn(II).     

Field desorption mass spectrometry of 1-methylpyridinium salts

Quaternary pyridinium salts were investigated by field desorption, field ionization and electron impact mass spectrometry. Thermal decomposition of the salts under field desorption conditions was found to give very abundant volatile products, identified as the dihydro analogues and the ‘methides’ of the cations. The formation of the volatile compounds, especially those with molecular weights corresponding to those of the (cation ?1), (cation +1) and (cation +13) was studied in detail by deuterium and ¹³C labelling experiments.     

Reaktionen von 2- und 3-phenylsubstituierten Alkylakyliden-iminium-Ionen in der Gasphase. 5. Mitteilung über stossinduzierte Fragmentierungen von felddesorbierten Kationen

Reactions of 2- and 3-Phenyl Substituted Alkylalkylidene Iminium Ions in the Gas Phase The collision-induced fragmentations of 2- and 3-phenyl substituted alkylalkylidene iminium ions are reported. Besides the homolytic cleavage of the azaallyl bond a nucleophilic attack of the unsubstituted phenyl group at the iminium function is observed in the gas phase, yielding carbonium ions such as cyclopropanspirobenzenium ( 3 ), indanylium ( 10 ) and indenylium ions ( 11 ).     

Konstitution und absolute Konfiguration der Rhoeadin-Alkaloide (+)-Alpinigenin und (+)-cis-Alpinigenin

The constitution and absolute configuration of the rhoeadine alkaloids (+)-alpinigenine and (+)-cis-alpinigenine. The fundamental structure of the hemi-acetal phenylbenzazepine alkaloid (+)-alpinigenine ( 1 ), isolated from Papaver bracteatum LINDL ., was derived essentially from ¹H-NMR.- and mass-spectra of 1 and its derivatives 7, 10 and 14 (cf. Scheme 2). The positioning of the four methoxy groups in the two aromatic rings could be deduced from the ¹H-NMR.-spectra of the N-oxides 14 and 15 in which, as a result of favourable sterical and conformational behaviour, an interaction exists between the N-oxide oxygen atom and one of the two ortho protons in ring C. The B/D-trans-fused 1 undergoes isomerization in 1N HCl to cis-alpinigenine ( 16 ). A stereochemical correlation between bases in the trans-and cis-series was enabled via an Emde degradation of the corresponding methylacetal-methyliodides 21 resp. 19 leading to the enantiomeric isochroman derivatives 22 resp. 23 which are achiral at C (2) (Scheme 4). The configuration at C (14) in the hemi-acetals (eg. 1 and 16 ) and the methyl ethers (eg. 7 and 8 ) is discussed in detail (cf. Scheme 7). (+)-Alpinigenine ( 1 ) has the (1S, 2R, 14R) configuration and (+)-cis-alpinigenine ( 16 ), in chloroform or acetone solution, the (1R, 2R, 14R) configuration.     

Stereochemistry of Polynuclear Cadmium(II)thioglycolates: Crystal Structure of [ICd8(SCH2CH2OH)12]3+ · 3I− · H2O

Crystals of the title compound are triclinic, a = 27.87 Å, b = 10.77 Å, c = 12.94 Å, α 73.1°, β 116.1°, γ 120.0°, space group P1 . The structure consists of octanuclear ions: Eight Cd(II) ions are found at the corners of a distorted cube, the center of the cube is occupied by an iodide, the twelve thioglycolate sulfur atoms bridge the twelve edges of the cube thereby forming a distorted icosahedron. Cadmium ions are either five or seven coordinate. The phase problem for this structure was solved using a combination of very high and very low E-values.     

Beiträge zur Grenzflächenchemie phosphororganischer Verbindungen

Zusammenfassung Die tertiären n-aliphatischen Phosphine spreiten auf Wasser spontan zu einem monomolekularen Film aus. Die Kompressionsisothermen der untersuchten tertiären aliphatischen Phosphine in homologer Reihe mit der Kettenlänge von C₄ bis C₁₆ wurden ausgemessen und die dabei auftretenden Filmzustände identifiziert. Das tertiäre C₅-Phosphin bildet realgasanaloge, die C₆–C₁₂-Phosphine flüssiganaloge und die längerkettigen Phosphine festanaloge Filme.Ein Übergang vom tertiären Phosphin zum Phosphinoxid hat auf die Filmbildung keinen Einfluß, es ergibt sich nur eine geringfügige Vergrößerung der molekularen Fläche von etwa 10%.Der auf den Filmdruck 0 extrapolierte molekulare Flächenbedarf wurde sowohl nach den herkömmlichen Verfahren aus denF/A-Diagrammen als auch mit einer anderen Methode aus denF·A/F-Isothermen berechnet: beide Werte zeigen sehr gute Übereinstimmung. Dabei zeigt der Vergleich mit dem aus den molekularen Abmessungen errechneten Flächenbedarf, daß die Phosphinmoleküle im komprimierten Film nicht vollständig in Pyramiden- bzw. Kegelform geordnet sind sondern daß die aliphatischen Ketten vom sechsten C-Atom an senkrecht auf der Substratoberfläche stehen. Der P-C-Winkel ist nicht für, die ganze Kette richtungsweisend, die flexiblen Kohlenwasserstoff ketten sind abgewinkelt. Mit zunehmender Kettenlänge wächst das Molekül nur noch senkecht in die Höhe, deshalb bleibt die molekulare Fläche ab C₆ annähernd konstant.

---

Summary Tertiäry n-aliphatic phosphines form on water surfaces spontanously monolayers. The force-area isotherms of a homologous series of phosphins with a chainlength varying from C₄ to C₁₆ were measured and the appearing states of the films were identified. The tertiary C₅ phosphine forms real-gas analogous films, the C₆ to C₁₂ phosphines liquid, analogous films and phosphines with lange carbon chains solid analogous films.A transition from tertiäry phosphines to the corresponding phosphine oxide has no influence on the formation of the films, it results only in an insignificant (10 p. c.) increase of the molecular area.The molecular area from the extrapolation to the film pressure of 0 was calculated by the customery methods out of theF/A diagramms, and by an other methods out of theFA/F isotherms. Good accordance of both values is shown. The area calculated from the molecular dimensions shows in comparison, that the phosphine molecules in comprimated films are not exactly disposed in pyramidal or conic shape, but that each aliphatic chain changes its direction after the sixth C-atom and stands vertically to the liquid-air interface. The direction of the chains is not determined by the angle of the P–C bonding, because the flexible carbon changes are distorted. With increasing chainlength, beginning from the tertiäry C₆ phosphin the carbon chains stand only vertically to the substrate. Therefore the need of molecular area remains almost constant.

---

---

Mit 8 Abbildungen und 5 Tabellen