Volumetric Properties of the Binary Systems of Dimethyl Sulfoxide with Methacrylic Acid,Vinyl Acetate,Butyl Methacrylate,and Allyl Methacrylate at 298.15 K

Densities of the binary systems of dimethyl sulfoxide with methacrylic acid, vinyl acetate, butyl methacrylate, and allyl methacrylate have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess molar volumes are negative for the four binary systems, probably as a result of the large dipole moment of the solvent, and become smaller as the monomer becomes more branched or longer. Methacrylic acid exhibits substantially larger negative excess molar volumes, probably due to hydrogen bonding with the solvent. The system dimethyl sulfoxide with butyl methacrylate presents near ideal behavior.     

Volumetric Properties of Toluene with Ethyl Acrylate, Butyl Acrylate, Methyl Methacrylate, and Styrene at 25°C

Densities of the binary systems of toluene with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition, at 25°C and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densitometer. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are negative for systems toluene + (ethyl acrylate, butyl acrylate, and styrene) and positive for the system toluene + methyl methacrylate.     

Is fullerene C60 large enough to host a multiply bonded dimetal?

Some dimetal fullerenes M 2@C 60 (M = Cr, Mo, W) have been studied with computational quantum chemistry methods. The transition metal diatomic molecules Cr 2, Mo 2, W 2 form exohedral complexes with C 60, while U 2 forms a highly symmetric endohedral compound and it is placed in the center of the C 60 cavity. This highly symmetric structure is an artifact due to the small size of the C 60 cavity, which constrains U 2 at the center. If a larger cavity is used, like C 70 or C 84, U 2 preferentially binds the internal walls of the cavity and the U-U bond no longer exists.     

Absorption and distribution of lupeol in CD‐1 mice evaluated by UPLC–APCI+–MS/MS

Lupeol is a dietary triterpene that shows limited water solubility, which affects its bioavailability. It is well known that poor oral bioavailability is one of the major causes of therapeutic variability. Lupeol has been reported to have multiple biological activities; however, there are no reports about its bioavailability. Therefore, the objective of this research was to evaluate the systemic bioavailability of lupeol. An experimental strategy with three groups of female CD‐1 strain mice was proposed (control, olive oil and lupeol in olive oil), at six experimental times (0.5, 2, 4, 8, 12 and 24 h) with four animals per experimental point. Mice were sacrificed for organs, urine, feces and blood collection. Lupeol was extracted from samples and analyzed by UPLC–APCI⁺–MS/MS, obtaining the pharmacokinetics parameters time to peak concentration 6.444 ± 0.851 h and peak concentration 8.071 ± 2.930 μg/mL. Study of direct digestion and absorption in various organs showed important concentrations of lupeol at earlier post‐administration times (stomach, 137.25 ± 19.94 ng/mg and small intestine, 99.00 ± 12.99 ng/mg). The main excretion route was fecal, with a peak at 12 h post‐administration (163.28 ± 9.83 μg/mg). Absorption of lupeol by the animals was better than expected despite its nonpolar nature (extent of absorption F = 0.645 ± 0.0581).     

Three‐dimensional modeling of non‐hydrostatic free‐surface flows on unstructured grids

A three‐dimensional numerical model is presented for the simulation of unsteady non‐hydrostatic shallow water flows on unstructured grids using the finite volume method. The free surface variations are modeled by a characteristics‐based scheme, which simulates sub‐critical and super‐critical flows. Three‐dimensional velocity components are considered in a collocated arrangement with a σ‐coordinate system. A special treatment of the pressure term is developed to avoid the water surface oscillations. Convective and diffusive terms are approximated explicitly, and an implicit discretization is used for the pressure term to ensure exact mass conservation. The unstructured grid in the horizontal direction and the σ coordinate in the vertical direction facilitate the use of the model in complicated geometries. Solution of the non‐hydrostatic equations enables the model to simulate short‐period waves and vertically circulating flows. Copyright © 2015 John Wiley & Sons, Ltd.     

A novel synergistic formulation between a cationic surfactant from lysine and hyaluronic acid as an antimicrobial coating for advanced cellulose materials

In this investigation, a novel coating for viscose fabric surface modification was developed using a synergistic formulation between a natural antimicrobial cationic surfactant from lysine (MKM) and a biopolymer hyaluronic acid (HA). The interaction between MKM and HA in aqueous solutions, as well as the interactions between their synergistic formulation (HA-MKM) and viscose fabric (CV) were studied using pH-potentiometric titrations’, turbidity measurements, the Kjeldahl method for the determination of nitrogen amounts, attenuated total reflectance fourier transform infrared spectroscopy, and scanning electron microscopy. The hydrophilic and antimicrobial properties of the functionalised CV were examined in order to evaluate its usages for medical applications. The results of the interaction studies showed that MKM and HA interact with each other by forming a precipitate when the binding sites of HA are saturated. The precipitate has a slightly positive charge at neutral pH due to excess binding of the MKM to HA. The excess positive charge was also detected on CV coated with HA-MKM. This was proven to be very beneficial for the antimicrobial properties of the functionalised CV. The antimicrobial tests showed exceptional antimicrobial activity of the functionalised CV against Escherichia Coli, Staphylococcus Aureus, Streptococcus Agalactiae, Candida Albicans, and Candida Glabrata, making the CV fabric highly interesting for potential use in medicine.     

Density, excess volume, and excess coefficient of thermal expansion of the binary systems of dimethyl carbonate with butyl methacrylate, allyl methacrylate, styrene, and vinyl acetate at T = (293.15, 303.15, and 313.15) K

Densities of the binary systems of dimethyl carbonate with butyl methacrylate, allyl methacrylate, styrene, and vinyl acetate have been measured as a function of the composition at (293.15, 303.15, and 313.15) K at atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The excess molar volumes are negative for the (dimethyl carbonate + vinyl acetate) system and positive for the three other binaries, and become more so as the temperature increases from (293.15 to 313.15) K. The apparent volumes were used to calculate the values of the partial excess molar volumes at infinite dilution. The excess coefficient of thermal expansion is positive for the four binary systems. The calculated excess molar volumes were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. An explanation of the results is offered based on the FT-IR (ATR) spectra of several mixtures of the different systems.