Bs0 → μ+μ? in LHCb

Due to its sensitivity to New Physics contributions, the branching ratio of the very rare decay B _s ⁰ → μ ⁺ μ ⁻ is one of the most interesting measurements using the first data from the LHC accelerator. The analysis strategy for the study of this channel in the LHCb experiment is presented, as well as a review of the potential of the experiment in such study, using the latest simulations. With four months of nominal data taking, any enhancement from the Standard Model prediction can be excluded.     

Recent results at LULI on fast electron transport with and without guiding cone in the context of fast ignitor

We present experimental and numerical results obtained at LULI (Laboratoire pour l’Utilisation des Lasers intenses) on propagation and energy deposition of laser-generated fast electrons into conical targets. The experimental measurements were performed by means of several diagnostics in order to assess the predicted benefit of conical targets over standard planar ones. Various configurations have been tried, regarding the laser parameters with the aim of optimizing the laser-to-target coupling. Our best results have been obtained when the laser was frequency-doubled at 0.53 μm, corresponding to interaction conditions without laser pedestal due to the ASE (Amplified Spontaneous Emission). Our data pinpoint the detrimental influence of the pre-plasma generated by the laser pedestal at 1.057 μm, whose confinement is enhanced in conical geometry as evidenced by shadowgraphic measurements which is also confirmed by 2D Cu-Ka transverse images obtained from Cu cones. The consequence is the filling of the cone, preventing the laser beam from efficiently reaching the cone tip. These experimental results are compared to 2D PIC simulations modeling of the laser-cone interaction.     

Effects of strontium and calcium simultaneous substitution on electrical and structural properties of Pb1?x?yCaxSryTiO3 thin films

Ferroelectric Pb_1−x−y Ca _x Sr _y TiO₃ thin films (denoted by PCST90, PCST70, and PCST30) were deposited on the Pt/Ti/SiO₂/Si substrates by a chemical solution deposition method. Their properties were investigated from the viewpoint of crystal structure, microstructure, dielectric, and ferroelectric properties. X-ray diffraction patterns revealed the formation of PCST90, PCST70, and PCST30 thin films without any secondary phases. Infrared and Raman spectroscopy results show that a gradual phase transition from tetragonal to pseudocubic or cubic perovskite structure may occur in PCST thin films with the simultaneous increase of Ca²⁺ and Sr²⁺ contents. Both substitution of isovalent Ca²⁺ and Sr²⁺ at Pb²⁺-site enhanced the dielectric constant and reduced the remnant polarization. In addition, ferroelectric test analyses show that the PCST thin films undergo a ferroelectric-to-paraelectric phase transformation with an amount of Pb²⁺, Ca²⁺, and Sr²⁺ at 30%, 35%, and 35% mol, respectively. Hence, the absence of ferroelectric property may be attributed to a decreasing of the octahedron distortion in the perovskite structure accompanied by a weakening of long-range ferroelectric order.     

Charged tensor matter fields and Lorentz symmetry violation via spontaneous symmetry breaking

We consider a model with a charged vector field along with a Cremmer-Scherk-Kalb-Ramond (CSKR) matter field coupled to a U(1) gauge potential. We obtain a natural Lorentz symmetry violation due to the local U(1) spontaneous symmetry breaking mechanism triggered by the imaginary part of the vector matter. The choice of the unitary gauge leads to the decoupling of the gauge-KR sector from the Higgs-KR sector. The excitation spectrum is carefully analyzed and the physical modes are identified. We propose an identification of the neutral massive spin-1 Higgs-like field with the massive Z boson of the so-called mirror matter models.Received: 30 October 2003, Revised: 16 March 2004, Published online: 23 June 2004     

Contact phase modulation method for acoustic nonlinear parameter measurement in solid

In this work, a new method to measure in contact the nonlinearity parameter beta of solid plates is presented. A high frequency (HF) tone-burst signal of 20 MHz is inserted in the material by a contact-transducer (with a suitable coupling). A low frequency (LF) pulse (2.5 MHz) is applied to the other face, in the opposite direction, so that the nonlinear interaction of the two waves takes place during the back propagation toward the HF transducer. This collinear interaction creates a phase modulation of the HF tone-burst which is proportional to the beta coefficient and the particle velocity of the LF wave. To determine this particle velocity, in time domain, an extended self-reciprocity calibration of the contact LF transducer is used. A numeric phase demodulation is then performed, giving the beta coefficient of the sample. The proposed method is validated by nonlinearity parameter measurements in Fused Silica. The nonlinear parameter of Fused Silica measured is found to be in good agreement with the literature, and specially the negative sign of this parameter.     

EPR spectroscopy of protein microcrystals oriented in a liquid crystalline polymer medium

Correlation of the g-tensor of a paramagnetic active center of a protein with its structure provides a unique experimental information on the electronic structure of the metal site. To address this problem, we made solid films containing metalloprotein (Desulfovibrio gigas cytochrome c(3)) microcrystals. The microcrystals in a liquid crystalline polymer medium (water/hydroxypropylcellulose) were partially aligned by a shear flow. A strong orientation effect of the metalloprotein was observed by EPR spectroscopy and polarizing optical microscopy. The EPR spectra of partially oriented samples were simulated, allowing for molecular orientation distribution function determination. The observed effect results in enhanced sensitivity and resolution of the EPR spectra and provides a new approach towards the correlation of spectroscopic data, obtained by EPR or some other technique, with the three-dimensional structure of a protein or a model compound.     

Cold atoms in non-Abelian gauge potentials: from the Hofstadter "moth" to lattice gauge theory

We demonstrate how to create artificial external non-Abelian gauge potentials acting on cold atoms in optical lattices. The method employs atoms with k internal states, and laser assisted state sensitive tunneling, described by unitary k x k matrices. The single-particle dynamics in the case of intense U2 vector potentials lead to a generalized Hofstadter butterfly spectrum which shows a complex mothlike structure. We discuss the possibility to realize non-Abelian interferometry (Aharonov-Bohm effect) and to study many-body dynamics of ultracold matter in external lattice gauge fields.     

Pulsed Nd:YAG laser welding of AISI 304 to AISI 420 stainless steels

The technique to weld AISI 304 stainless steel to AISI 420 stainless steel with a pulsed Nd:YAG laser has been investigated. The main objective of this study was to determine the influence of the laser beam position, with respect to the joint, on weld characteristics. Specimens were welded with the laser beam incident on the joint and moved 0.1 and 0.2 mm on either side of the joint. The joints were examined in an optical microscope for cracks, pores and to determine the weld geometry. The microstructure of the weld and the heat affected zones were observed in a scanning electron microscope. An energy dispersive spectrometer, coupled to the scanning electron microscope, was used to determine variations in (weight %) the main chemical elements across the fillet weld. Vickers microhardness testing and tensile testing were carried out to determine the mechanical properties of the weld. The results of the various tests and examinations enabled definition of the best position for the incident laser beam with respect to the joint, for welding together the two stainless steels.     

Biased bilayer graphene: semiconductor with a gap tunable by the electric field effect

We demonstrate that the electronic gap of a graphene bilayer can be controlled externally by applying a gate bias. From the magnetotransport data (Shubnikov-de Haas measurements of the cyclotron mass), and using a tight-binding model, we extract the value of the gap as a function of the electronic density. We show that the gap can be changed from zero to midinfrared energies by using fields of less, approximately < 1 V/nm, below the electric breakdown of SiO2. The opening of a gap is clearly seen in the quantum Hall regime.