Synthesis of the Bretonins,Polyolefinic Esterified Glyceryl Ethers of an Unidentified Sponge from the North-Brittany Sea: Absolute Configuration and Novel Structure Assignment

The absolute configurations of acetylated bretonin A (= (+}-( R )-1-[(acetoxy)methyl]-2-{[(4E,6E,8E)-dodeca-4,6,8-trienyl]oxy}ethyl 4-acetoxybenzoate; (?)- 1b ) and isobretonin A (= (+)-(S)-3-{[(4E,6E,8E)-do-deca-4,6,8-trienyl]oxy}-2-hydroxypropyl 4-hydroxybenzoate; (+)-2), previously isolated from an undetermined sponge of the North Brittany sea, were established by comparison with synthetic (+)- lb and (+)- 2 , obtained from the condensation of commerical (?)-(R)-2,2-dimethyl-1,3-dioxolan-4-yl p-toluenesuifonate ((?)-(R)- 15 ) with a mixture of (4E,6E,8E)- ( 14e ) and (4E,6Z,8E)-dodeca-4,6,8-trien-1-ol ( 14z ). This also allowed confirming the structure and configuration of bretonin B (= (S)-2-{[(4E,6Z,8E)-dodeca-4,6,8-trienyl]oxy}-1-(hydroxy-methyl)ethyl 4-hydroxybenzoate; 3 ) which was also isolated from the same sponge, albeit in a too small amount for a complete study. As concerns the glyceryl ethers precursors of the bretonins, co-occurrence of the usual (S)-con-figuration (from 1a ) with the unusual (R)-configuration (from (+)- 2 )) poses intriguing biogenetic problems.     

Rogiolenyne D,the likely immediate precursor of rogiolenyne A and B,branched C15 acetogenins isolated from the red seaweed Laurencia microcladia of II Rogiolo. Conformation and absolute configuration in the whole series

It is shown that in the red seaweed Jaurencia microcladia, collected in the Mediterranean off the torrent Il Rogiolo, the new branched C₁₅ acetogenin rogiolenyne D ( = (+)-(2S,3S,7R))-3-(bromomethyl)-7-[(Z)-1-chlorohexen-3-en-5-nyyl)]-2-ethyl-2,3,6,7-tetrahydrooxepin; (+)- ?3 co-occurs with the already reported rogiolenyne A ((?)- 1 ) and B ((?)- 2a , suggesting the lineage (+)- 3 →(?)- 1 (?)- 2a ,Which is realized here chemically. The relative configurations are established via NMR analysis and chemical transformations as regards the seven-membered ring, while recourse is made to conformational analysis for the side chain. The absolute configuration is established via the Mosher's NMR method applied to the MPTA esters of (?)- 2a .     

From Weakly Coordinating to Non‐Coordinating Anions? A Simple Preparation of the Silver Salt of the Least Coordinating Anion and Its Application To Determine the Ground State Structure of the Ag(η2‐P4)2+ Cation

The unexpected but facile preparation of the silver salt of the least coordinating [(RO)₃Al‐F‐Al(OR)₃]^? anion (R=C(CF₃)₃) by reaction of Ag[Al(OR)₄] with one equivalent of PCl₃ is described. The mechanism of the formation of Ag[(RO)₃Al‐F‐Al(OR)₃] is explained based on the available experimental data as well as on quantum chemical calculations with the inclusion of entropy and COSMO solvation enthalpies. The crystal structures of (RO)₃Al←OC₄H₈, Cs⁺[(RO)₂(Me)Al‐F‐Al(Me)(OR)₂]^?, Ag(CH₂Cl₂)₃⁺[(RO)₃Al‐F‐Al(OR)₃]^? and Ag(η²‐P₄)₂⁺[(RO)₃Al‐F‐Al(OR)₃]^? are described. From the collected data it will be shown that the [(RO)₃Al‐F‐Al(OR)₃]^? anion is the least coordinating anion currently known. With respect to the fluoride ion affinity of two parent Lewis acids Al(OR)₃ of 685 kJ mol^?1, the ligand affinity (441 kJ mol^?1), the proton and copper decomposition reactions (?983 and ?297 kJ mol^?1) as well as HOMO level and HOMO–LUMO gap and in comparison with [Sb₄F₂₁]^?, [Sb(OTeF₅)₆]^?, [Al(OR)₄]^? as well as [B(R^F)₄]^? (R^F=CF₃ or C₆F₅) the [(RO)₃Al‐F‐Al(OR)₃]^? anion is among the best weakly coordinating anions (WCAs) according to each value. In contrast to most of the other cited anions, the [(RO)₃Al‐F‐Al(OR)₃] anion is available by a simple preparation in conventional inorganic laboratories. The least coordinating character of this anion was employed to clarify the question of the ground state geometry of the Ag(η²‐P₄)₂⁺ cation (D_2h, D₂ or D_2d?). In agreement with computational data and NMR spectra it could be shown that the rotation along the Ag‐(P‐P‐centroid) vector has no barrier and that the structure adopted in the solid state depends on packing effects which lead to an almost D_2h symmetric Ag(η²‐P₄)₂⁺ cation (0 to 10.6° torsion) for the more symmetrical [Al(OR)₄]^? anion, but to a D₂ symmetric Ag(η²‐P₄)₂⁺ cation with a 44° twist angle of the two AgP₂ planes for the less symmetrical [(RO)₃Al‐F‐Al(OR)₃]^? anion. This implies that silver back bonding, suggested by quantum chemical population analyses to be of importance, is only weak.     

Influences of nanoparticles and chain length on thermodynamic and electrical behavior of fluorine liquid crystals

Hydrogen-bonded polar nematic liquid crystal series with the general formula nOBAF (n = 7—12) is studied. The mesomorphic characterization is demonstrated through differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The complexes with short alkyl chains (n=7, 8) present a wide nematic range and monotropic smectic F mesophase, whereas the longer alkyl chain (n=10—12) analogues show high melting and low clearing mesomorphic liquid crystals. The thermal range of the mesophase and the birefringence increase with chain length decreasing. Furthermore, the effect of the nanoparticles (LiNbO₃) on the thermal and the electrical behavior of 8OBAF are investigated. The presence of LiNbO₃ nanoparticles increases the conductivity and reduces the resistivity of the complex.     

Shedding light on the mitochondrial matrix through a functional membrane transporter

The first fluorescent probes that are actively channeled into the mitochondrial matrix by a specific mitochondrial membrane transporter in living cells have been developed. The new functional probes (BCT) have a minimalist structural design based on the highly efficient and photostable BODIPY chromophore and carnitine as a biotargeting element. Both units are orthogonally bonded through the common boron atom, thus avoiding the use of complex polyatomic connectors. In contrast to known mitochondria-specific dyes, BCTs selectively label these organelles regardless of their transmembrane potential and in an enantioselective way. The obtained experimental evidence supports carnitine–acylcarnitine translocase (CACT) as the key transporter protein for BCTs, which behave therefore as acylcarnitine biomimetics. This simple structural design can be readily extended to other structurally diverse starting F-BODIPYs to obtain BCTs with varied emission wavelengths along the visible and NIR spectral regions and with multifunctional capabilities. BCTs are the first fluorescent derivatives of carnitine to be used in cell microscopy and stand as promising research tools to explore the role of the carnitine shuttle system in cancer and metabolic diseases. Extension of this approach to other small-molecule mitochondrial transporters is envisaged.

A BODIPY derivative of carnitine enters mitochondria regardless of their membrane potential and in an enantioselective way through a specific mitochondrial membrane transporter in living cells.     

Quantification of 60Fe atoms by MC-ICP-MS for the redetermination of the half-life

In many scientific fields, the half-life of radionuclides plays an important role. The accurate knowledge of this parameter has direct impact on, e.g., age determination of archeological artifacts and of the elemental synthesis in the universe. In order to derive the half-life of a long-lived radionuclide, the activity and the absolute number of atoms have to be analyzed. Whereas conventional radiation measurement methods are typically applied for activity determinations, the latter can be determined with high accuracy by mass spectrometric techniques. Over the past years, the half-lives of several radionuclides have been specified by means of multiple-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) complementary to the earlier reported values mainly derived by accelerator mass spectrometry. The present paper discusses all critical aspects (amount of material, radiochemical sample preparation, interference correction, isotope dilution mass spectrometry, calculation of measurement uncertainty) for a precise analysis of the number of atoms by MC-ICP-MS exemplified for the recently published half-life determination of $^{60}$ Fe (Rugel et al, Phys Rev Lett 103:072502, 2009).     

Application of a Chitosan-Immobilized Talaromyces thermophilus Lipase to a Batch Biodiesel Production from Waste Frying Oils

Waste frying oil, which not only harms people’s health but also causes environmental pollution, can be a good alternative to partially substitute petroleum diesel through transesterification reaction. This oil contained 8.8 % of free fatty acids, which cause a problem in a base-catalyzed process. In this study, synthesis of biodiesel was efficiently catalyzed by the covalently immobilized Talaromyces thermophilus lipase and allowed bioconversion yield up to 92 % after 24 h of reaction time. The optimal molar ratio was four to six parts of methanol to one part of oil with a biocatalyst loaded of 25 wt.% of oil. Further, experiments revealed that T. thermophilus lipase, immobilized by a multipoint covalent liaison onto activated chitosan via a short spacer (glutaraldehyde), was sufficiently tolerant to methanol. In fact, using the stepwise addition of methanol, no significant difference was observed from the one-step whole addition at the start of reaction. The batch biodiesel synthesis was performed in a fixed bed reactor with a lipase loaded of 10 g. The bioconversion yield of 98 % was attained after a 5-h reaction time. The bioreactor was operated successfully for almost 150 h without any changes in the initial conversion yield. Most of the chemical and physical properties of the produced biodiesel meet the European and USA standard specifications of biodiesel fuels.     

Quantitative HPLC-MS analysis of nucleotide sugars in plant cells following off-line SPE sample preparation

An analytical workflow was developed for the absolute quantification of uridine diphosphate (UDP)-sugars in plant material in order to compare their metabolism both in wild-type Arabidopsis thaliana and mutated plants (ugd2,3) possessing genetic alterations within the UDP-glucose dehydrogenase genes involved in UDP-sugar metabolism. UDP-sugars were extracted from fresh plant material by chloroform-methanol-water extraction and further purified by solid-phase extraction with a porous graphitic carbon adsorbent with extraction efficiencies between 80?±?5 % and 90?±?5 %. Quantitative determination of the UDP-sugars was accomplished through HPLC separation with a porous graphitic carbon column (Hypercarb^TM) which was interfaced to electrospray ionization Orbitrap mass spectrometry. The problem of instable retention times due to redox processes on the stationary phase were circumvented by grounding of the column effluent and incorporation of a column regeneration procedure using acetonitrile-water containing 0.10 % trifluoroacetic acid. The method was calibrated using external calibration and UDP as internal standard. Calibration functions were approximated by first- or second-order regression analysis for concentrations spanning three orders of magnitude. Upon injecting sample volumes of 2.65 μL, the limits of detection for the UDP-sugars were in the 70 nmol L^?1 range. Six different UDP-sugars, including UDP-glucose, UDP-galactose, UDP-arabinose, UDP-xylose, UDP-glucuronic acid, and UDP-galacturonic acid were found in concentrations of 0.4 to 38 μg/g plant material. Data evaluation by analysis of variance (ANOVA) revealed statistically significant differences in UDP-sugar concentrations between wild-type and mutant plants, which were found to conclusively mirror the impaired metabolic pathways in the mutant plants.