Stereochemistry of photoinitiated emulsion polymerization

The tacticity of poly(methyl methacrylate) (PMMA) samples made by emulsion polymerization (EP) has been determined by NMR spectroscopy at higher resolution than any previous study. When photoinitiation is employed at room temperature, the polymer obtained is highly syndiotactic and more stereoregular than that obtained in homogeneous radical polymerization under the same conditions. The percentage of racemic dyads and the length of racemic sequences vary significantly with the degree of conversion and the temperature, but not with variation of the hydrophobic or the hydrophilic part of the detergent molecules. A magnetic field of 5 kG or less accelerates the polymerization reaction and increases the polymer molecular weight when dibenzyl ketone is employed as oil-soluble photoinitiator, and has an indirect influence on the polymer tacticity. From measurements of the temperature dependence of the polymer steric composition, the difference of activation enthalphy and entropy of the meso and racemic additions have been calculated. The values do not follow the correlations from precedent literature for radical polymerization in solution if the reaction is considered a first-order Markov process. The persistence ratio p depends on the detergent and the temperature of the EP; in some cases its difference from unity exceeds the experimental error. These results are interpreted as a conformational effect of the locus of the polymerization in the first stage of the EP (when micelles are present) that favors the racemic addition more than is expected in a homologous solvent such as an alkane, e.g., at the same temperature.     

Conductance in homomorphous solvents: Tetrabutylammonium salts and alkali picrates in butyrolactone-sulfolane mixtures

Conductance measurements are reported for LiPi, NaPi, KPi, RbPi, CsPi, Bu₄NPi, Bu₄NBr, Bu₄NClO₄, Bu₄NNO₃, and Bu₄NBBu₄ at 25°C in -butyrolactone-sulfolane mixtures. In these mixtures of solvents that are practically homomorphous, isodielectic and with comparable dipole moments, the ion pair association and ionic mobilities of large ions conform to the expectations of the primitive model. Electrolytes containing lithium or sodium ions show anomalies indicating that other factors besides shape, dipole moment, and polarizability of the solvent molecules are involved in the association and transport processes of these ions.     

Comparative study of the in vitro bioactivities of Bupleurum rigidum and B. fruticescens

Decoctions of the aerial parts of either Bupleurum rigidum or B. fruticescens are equally used in certain parts of Spain for the treatment of topical and musculoskeletal inflammations. In the present paper, their phytochemical profile and pharmacological value has been compared. After chromatographic and spectral analyses we could establish the presence of rutin and absence of chlorogenic acid in B. fruticescens, whilst the contrary applies to B. rigidum, providing a means to chemically differentiate extracts and dry materials from the two species. Their free radical scavenging and antiperoxidative activities were similar, with B. fruticescens being more active overall. The infusions of both Bupleurum species also showed similar anti-inflammatory activity when tested by NF-kappaB assay (40% and 42% at 60 microg x mL(-1)), as well as in a hexosaminidase exocytosis assay (30% at 50 microg x mL(-1)). Antimigratory effects on rat melanoma B16F10 showed significant activity for both infusions, with B. rigidum twice as potent as B. fruticescens, the activity of the latter not being fully explained by its content of rutin. Taking all these results together, we can conclude that, in the selected experimental models, there exist an in vitro bioequivalence of the infusions from both species, which is in agreement with the majority of ethnopharmacological reports.     

Growth mechanism of thermally processed Cu(In,Ga)S2 precursors for printed Cu(In,Ga)(S,Se)2 solar cells

We investigate a process used for the selenisation of particle‐based precursors to prepare low‐cost Cu(In,Ga)(S,Se)₂ (CIGS) solar cells. It is suitable for high throughput with a short optimum selenisation duration of 3–5 min and employs a rapid thermal annealing system with elemental selenium vapour. Homogeneous crack‐free Cu(In,Ga)S₂ precursor films of up to 1 µm are obtained via doctor blading. The high selenium vapour pressure in the selenisation reaction chamber results in the formation of a compact Cu(In,Ga)(S,Se)₂ layer on top of a carbon‐rich underlayer. In order to investigate the phase development in the film, the selenisation process was interrupted at different stages and the samples were monitored via XRD and surface‐sensitive Raman measurements. We find the formation of a polycrystalline Cu(In,Ga)Se₂ phase already after 1 s at the target temperature of 550 °C. Furthermore, the effect of initial precursor thickness on solar cell parameters is discussed. Complete solar cells are prepared by conventional methods, leading to conversion efficiencies well above 8%. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Compression elastic modulus of neutral,ionic, and amphoteric hydrogels based on N‐vinylimidazole

Several hydrogels of N‐vinylimidazole and sodium styrenesulfonate have been prepared by radical cross‐linking copolymerization in aqueous solution, using N,N′‐methylene‐bisacrylamide as crosslinker. Depending on composition, these hydrogels were neutral, amphoteric, cationic or anionic. Compression‐strain measurements were performed on samples as‐synthesized and swollen in deionized water or in acid aqueous solutions, with and without salt. It was thus found that the cross‐linking densities determined by compression measurements on as‐synthesized samples are in good accordance with those calculated by means of the model of polymer networks with pendant vinyl groups. A non‐Gaussian parameter (β) was introduced to explain that the elastic moduli (G) of samples swollen at equilibrium are larger than predicted by the Gaussian model. The β values of the neutral or ionized systems increase with swelling and fall into a single curve, which denotes a common behavior. Swelling has two opposite effects on G; on the one hand G decreases because the polymer volume fraction diminish and the system shifts from the affine limit to the phantom one; on the other, β increases and contributes to increasing G. The balance of those two opposite effects determines the variation of G with swelling. The possible contribution of ionic crosslinks to ν_e for the polyampholyte and for the polycation wearing divalent counteranions was discussed. A peculiar system is poly(sodium styrenesulfonate), whose cross‐linking density is much lower than expected. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1078–1087, 2009     

Decomposition of formamide assisted by microwaves, a tool for synthesis of nitrogen-containing heterocycles

Generation of ammonia via thermal decomposition of formamide was studied under microwave conditions to provide an efficient tool for the synthesis of nitrogen-containing heterocycles. Quinazolin-4-ones, which are known as building blocks for molecules with pharmaceutical interest, were chosen as examples. Our work confirms that reactants may have different behaviours under microwaves, depending on power input, reached temperature and pressure in the vials. Full control and fine tuning of these parameters are achievable using modern microwave technology.     

Thin-layer chromatography and multivariate data analysis of willow bark extracts

In most cases the pharmacological activity of plant extracts is not assigned to single components and often not all active ingredients are known. Approaches other than those considering single compounds only to analyze plant material have proven helpful for a better characterization of extracts in their entirety. In this study extracts of willow bark are analyzed by high-performance thin-layer chromatography (HPTLC) and two different pharmacological tests [the 2,2'-azobis (2-amidinopropane) dihydrochloride reaction and the xanthine/xanthine oxidase reaction] with the help of multivariate data analysis. Described are two models using the results of the chromatographic study of 22 various extracts of willow bark and their pharmacological properties. The chromatographic data are obtained by a special TLC scanner that enables measurement of HPTLC tracks simultaneously in the range of lambda = 200-400 nm. Additionally, the developed models are used to predict the activity of another three extracts of willow bark demonstrating the quality of the model.     

Highly Diastereoselective,Biogenetically Patterned Synthesis of (+)‐(1S,6R)‐Volvatellin (=(+)‐(4R,5S)‐5‐Hydroxy‐4‐(5‐methyl‐1‐methylenehex‐4‐en‐2‐ynyl)cyclohex‐1‐ene‐1‐carbaldehyde)

The synthesis of volvatellin ( 4a ), previously isolated from a herbivorous marine mollusk, was achieved with high diastereoselectivity from putative dietary oxytoxin‐1 ( 2 ). A biogenetically patterned carbonyl‐ene route was chosen, proceeding from 2 predominantly via the trans cyclization product 3 without the use of enzymes. This challenges the involvement of enzymes in the formation of 4a in nature. The optical purity and absolute configuration (1S,4S,6R), assigned to 3 from high‐field ¹H‐NMR examination of its Mosher (MTPA) esters 6 , was retained on its chemical conversion to (+)‐(1S,6R)‐configured 4a and is consistent with the (4S) configuration previously established for caulerpenyne ( 1 ).