A spectroscopic study of cobalt(III) furyldioximates

Summary The electronic properties of a series of cobalt(III)trans-furyldioximato-complexes of the type [CoB(FH)₂X] (B=NH₃, X=Cl, Br, I or NO₂; B=pyridine (py) or thiocarbamide (thio), X=Cl or Br; B=imidazole (imid), X=Br), [Co(FH₂)(FH)Cl₂] and [Co(thio)₂(FH)₂]NO₃ were studied by i.r., u.v. and¹H and¹³C n.m.r. spectra The results were compared with those from the corresponding dimethylglyoximato-complexes. It was concluded that -conjugation over the equatorial plane in the furyldioximates is greater than in the dimethylglyoximates. There is some evidence of thetrans-influence of the anionic ligands in the ammines which are in the order NO ₂ ^– >Br^–>Cl^–.     

On-line filtration system for determining total chromium and chromium in the soluble fraction of industrial effluents by flow injection flame atomic absorption spectrometry

Two manifolds were assessed for the purpose of determining both the total chromium content and that present as a soluble form in industrial effluents by flow injection flame atomic absorption spectrometry (FI-FAAS). To determine the chromium content in the soluble fraction the samples were used without additional treatment, a 0.45 microm filter being included in the FI system. To determine the total chromium content, the samples were acidified with nitric acid 20% (v/v) and heated for 30 s in a microwave oven (temperatures of about 70 degrees C were reached). The problem posed by the very different concentration range in which total and soluble chromium are present was overcome by using programmed flow rate methodology and by only partially emptying the sample loop. A personal computer controlled both the rotation speed of a peristaltic pump and the volume of sample injected into the system, thus obtaining the dispersion degree required. Using the manifold proposed, the chromium content in the soluble fraction can be determined in the 0.5-20 microg mL(-1) range using a 10 microg mL(-1) single standard for calibration. To determine the total chromium content, a calibration line in the 20-200 microg mL(-1) range was obtained using a single 50 microg mL(-1) chromium standard solution. The reliability of the semi-automatic devices was verified by comparing the results obtained with those found by treating the samples and using both FAAS in a conventional way and a spectrophotometric method using diphenylcarbazide at the 95% confidence level (ANOVA test). The proposed procedures showed a RSD lower than +/-3%.     

Eptastigmine,nicotinamide and nicotinic acid determination using an inhibition enzyme sensor; application to pharmaceutical analysis

An enzyme inhibition biosensor, developed in our laboratory and previously used for the analysis of compounds with anticholinesterase activity (e.g. physostigmine, neostigmine, pyridostigmine nicotine and organophosphorus compounds) has now been tested for the analysis of another recently synthesized cholinesterase inhibitor, i.e. eptastigmine. In addition nicotinic acid and nicotinamide, although displaying weaker inhibition properties, were also tested in pharmaceutical products using the same inhibition enzyme sensor. The biosensor consisted of a hydrogen peroxide amperometric electrode coupled to a functionalised nylon membrane chemically bonding both the enzymes butyrylcholinesterase and choline oxidase; a butyrylcholine standard solution in glycine buffer acted as substrate. The response of the system to all the inhibitors considered was characterised completely and the analysis of several pharmaceutical formulations containing nicotinamide or nicotinic acid was also performed.     

Neutral organic lewis acids of π type

The interaction of some neutral acids of π type, bearing appropriate unsymmetrical substitutions at the C?C group with some selected bases (H₂O, NH₃, OH^?), is compared with that of the parent compound of a new set of neutral π acids, bearing symmetrical substitutions at the C?C group with the same bases. The analyses of the interaction energy, performed according to two decomposition schemes, with and without the counterpoise corrections, make clear the similarity of symmetrically and unsymmetrically substituted neutral organic acids.     

Derivatization procedures for the detection of beta(2)-agonists by gas chromatographic/mass spectrometric analysis

An evaluation of derivatization procedures for the detection of beta(2)-agonists is presented. The study was performed with the beta(2)-agonists bambuterol, clenbuterol, fenoterol, formoterol, salbutamol, salmeterol and terbutaline. Different derivatizating agents were employed, aiming to obtain derivatives with high selectivity to be used in the gas chromatographic/mass spectrometric analysis of beta(2)-agonists in biological samples. Trimethylsilylation was compared with different agents and the role of some catalysts was evaluated. Acylation, combined trimethylsilylation and acylation, and the formation of cyclic methylboronates were also studied. Sterical hindrance caused by different substituents at the nitrogen atom of the beta-ethanolamine lateral chain of beta(2)-agonist molecules is mainly responsible for differences in the abundances of the derivatives obtained. The use of catalysts produces an increase in the derivatization yield, especially for compounds with low steric hindrance (substituents with primary and secondary carbon atoms). The formation of trimethylsilyl (TMS) ethers is not influenced by structural molecular differences when only hydroxy groups are involved in derivatization. Combined trimethylsilylation and acylation showed that compounds with a secondary carbon atom linked to the nitrogen atom form mainly N-TFA-O-TMS derivatives, with a small amount of N-TMS-O-TMS derivatives. Compounds with tert-butyl substituents at the amino group (bambuterol, salbutamol and terbutaline) formed O-TMS derivatives as the main products, although a limited amount of trifluoroacylation at the nitrogen atom also occurred. Cyclic methylboronates were formed with bambuterol, clenbuterol, formoterol, salbutamol and salmeterol. Owing to hydroxy substituents in unsuitable positions for ring formation, this procedure was not effective for fenoterol and terbutaline. Mass spectra of different derivatives and tentative fragmentation profiles are also shown. For screening purpose (e.g. sports drug testing), derivatization with MSTFA or BSTFA alone is recommended as a comprehensive derivatization technique for beta(2)-agonists owing to minimal by-product formation; formation of cyclic methylboronates can be useful for confirmation purposes. Detection limits were obtained for the TMS and cyclic methylboronate derivatives using the derivatizing reagents MSTFA and trimethylboroxine, respectively. For most of the compounds, lower detection limits were found for the TMS derivatives.     

Determination of the boiling-point distribution by simulated distillation from n-pentane through n-tetratetracontane in 70 to 80 seconds

This work presents the carrying out of boiling-point distributions by simulated distillation with direct-column heating rather than oven-column heating. Column-heating rates of 300 degrees C/min are obtained yielding retention times of 73 s for n-tetratetracontane. The calibration curves of the retention time versus the boiling point, in the range of n-pentane to n-tetratetracontane, are identical to those obtained by slower oven-heating rates. The boiling-point distribution of the reference gas oil is compared with that obtained with column oven heating at rates of 15 to 40 degrees C/min. The results show boiling-point distribution values nearly the same (1-2 degrees F) as those obtained with oven column heating from the initial boiling point to 80% distilled off. Slightly higher differences are obtained (3-4 degrees F) for the 80% distillation to final boiling-point interval. Nonetheless, allowed consensus differences are never exceeded. Precision of the boiling-point distributions (expressed as standard deviations) are 0.1-0.3% for the data obtained in the direct column-heating mode.     

Nucleophilic epoxidation of γ-alkoxy dienyl sulfoxide derivatives

(E,E) and (Z,E) γ-alkoxy dienyl sulfones undergo nucleophilic epoxidation with remarkable regio- and stereoselectivity to render syn oxiranes in a process mainly controlled by the alkoxy stereocenter. Upon epoxidation γ-hydroxy dienyl sulfoxides provide sulfinyl and sulfonyl oxiranes along with bis-epoxides formed through a Payne rearrangement that can be prevented by silylation of the OH group. Interestingly, the presence of a γ-silyloxy group can invert the stereochemical trend of the molecule affording mainly an anti epoxidation process.     

MP2 study of substituent effects of 2-substituted alkyl ethyl methylcarbamates in homogeneous, unimolecular gas phase elimination reaction

Møller-Plesset MP2/6-31G method was used to examine the gas-phase elimination of 2-substituted alkyl ethyl N,N-dimethylcarbamates. The results of these calculations support a concerted non-synchronous six-membered cyclic transition state mechanism for carbamates containing a C_β–H bond at the alkyl side of the ester. These substrates produce the N,N-dimethylcarbamic acid and the corresponding olefin. The unstable intermediate, N,N-dimethylcarbamic acid, rapidly decomposes through a four-membered cyclic transition state to dimethylamine and CO₂ gas. Correlation of the logarithm of theoretical rate coefficients against original Taft's σ* values gave an approximate straight line (ρ*=−1.39, r=0.9558 at 360 °C). In addition to this fact, when log k_rel is plotted against the theoretical log k_rel for 2-substituted ethyl N,N-dimethylcarbamates a reasonable straight line (r=0.9919 at 360 °C) is obtained, suggesting similar mechanism.     

Synthesis of 4-aryl-2,3,6,7-tetrahydro-1H-pyrimido[4,5-b][1,4]-diazepin-6-ones from 4,5-diamino-1H-pyrimidin-6-ones and 1-aryl-3-(dimethylamino)-1-propanones

The reaction of 1-aryl-3-(dimethylamino)-1-propanones 1 with one equivalent of 4,5-diamino-1H-pyrimidin-6-ones 2 , in acidic medium, leads to the formation of 4-aryl-2,3,6,7-tetrahydro-1H-pyrimido[4,5-b]-[1,4]diazepin-6-ones 3 . The structure elucidation of the products is based on detail nmr analysis of experiments such as ¹³C, ¹H and DEPT including selective ¹³C{¹H} decoupling experiments.     

Nuclear magnetic resonance studies of sulfur inversion in bis(cyclopentadienyl)-molybdenum and -tungsten complexes with dithioethers

The metallocene thioether derivatives [Cp₂M(MeSCH₂CH₂SMe)][PF₆]₂ (1, M = MO; 2, M = W), [Cp₂Mo(SCH₂CH₂SMe)][PF₆] (3) and [Cp₂M(SCH₂CH₂S)] (4, M = Mo; 5, M = W) exhibit temperature-dependent fluxional behavior in solution, owing to the pyramidal sulfur inversion process. The activation energies for this process were determined from proton band-shape analysis in the cases of 1 (54.9 ± 2 kJ mol⁻¹), 2 (51.2 ± 4.6 kJ mol⁻¹) and 3 (30.0 ± 3.1 kJ mol⁻¹). Extended Hückel calculations on related model complexes suggest that local inversion at the sulfur atoms, rather that an inversion of the complete S---C---C---S chain, is responsible for the observed fluxional behaviour.