Oxo- and oxoperoxo-molybdenum(VI) complexes with aryl hydroxamates: synthesis, structure, and catalytic uses in highly efficient, selective, and ecologically benign peroxidic epoxidation of olefins

A solution obtained by dissolving MoO3 in H2O2 reacts separately with secondary hydroxamic acids (viz., N-benzoyl N-phenyl hydroxamic acid (BPHAH), N-benzoyl N-ortho-, -meta-, -para-tolyl hydroxamic acids, (BOTHAH, BMTHAH, and BPTHAH, respectively), and N-cinnamoyl N-phenyl hydroxamic acid (CPHAH) affording [MoO(O2)(BPHA)2] (1), [MoO(O2)(BOTHA)2] (2), [MoO(O2)(BMTHA)2] (3), [MoO(O2)(BPTHA)2] (4), and [Mo(O)2(CPHA)2](5), respectively. The O and O2 are situated cis to each other in 2-4, but in each case, they are disordered and distributed over four sites. This disorder does not exist in the 6-coordinate cis dioxo complex 5, to which crude MoO(O2)(CPHA)2 (5') was converted during recrystallization. An aqueous molybdate solution readily reacts with all those hydroxamic acids producing [Mo(O)2(hydroxamate)2] (6). While 2, 3, and 4 possess a very distorted pentagonal bipyramidal structure, 5 has a distorted octahedral geometry. In the solid state, as well as in solution, 5 exists as two apparently enantiomerically related molecules differing in the orientation of the pendant phenyl rings. To emphasize that the formation and structural uniqueness of 5 compared to 1-4 is caused by the influence of the cinnamoyl residue, one compound of the 6 series, namely, [Mo(O)2(BPHA)2] (6A), was structurally characterized to prove directly that the special stereochemical properties of 5 rely on the special electronic structure of CPHA- ligand. Complexes 1-5, as well as 6, show high potential and selectivity as catalysts in the epoxidation of olefins at room temperature in the presence of NaHCO3 as a promoter and H2O2 as a terminal oxidant. A comparative epoxidation study has been performed to determine the relative efficiency of the catalysts. To make the epoxidation method cost effective, a study to optimize the use of H2O2 has also been performed. To obtain evidence in favor of our suggested mechanism to this homogeneous olefin --> epoxide conversion, it was necessary to synthesize a peroxo-rich compound, namely, [MoO(O2)2BMTHA]- (7), but the attempted synthesis culminated in the isolation of [MoO(O2)2(C6H5COO)]- (8), obviously, via the hydrolysis of coordinated BMTHA.     

Solid‐State Structural Transformations and Photoreactivity of 1D‐Ladder Coordination Polymers of PbII

An attempt has been made to design double‐stranded ladder‐like coordination polymers (CPs) of hemidirected Pb^II. Four CPs, [Pb(μ‐bpe)(O₂C‐C₆H₅)₂] ? 2H₂O ( 1 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐C₆H₅)₂(O₂C‐C₆H₅)₂] ( 2 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐p‐Tol)₂(O₂C‐p‐Tol)₂] ? 1.5 H₂O ( 3 ) and [Pb₂(μ‐bpe)₂(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 4 ) (bpe=1,2‐bis(4′‐pyridyl)ethylene), have been synthesised and investigated for their solid‐state photoreactivity. CPs 2 – 4 , having a parallel orientation of bpe molecules in their ladder structures and being bridged by carboxylates, were found to be photoreactive, whereas CP 1 is a linear one‐dimensional (1D) CP with guest water molecules aggregating to form a hydrogen‐bonded 1D structure. The linear strands of 1 were found to pair up upon eliminating lattice water molecules by heating, which led to the solid‐state structural transformation of photostable linear 1D CP 1 into photoreactive ladder CP 2 . In the construction of the double‐stranded ladder‐like structures, the parallel alignment of C?C bonds in 2 – 4 is dictated by the chelating and μ₂‐η²:η¹ bridging modes of the benzoate and toluate ligands. The role of solvents in the formation of such double‐stranded ladder‐like structures has also been investigated. A single‐crystal‐to‐single‐crystal transformation occurred when 4 was irradiated under UV light to form [Pb₂(rctt‐tpcb)(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 5 ).     

Stereospecific Formal [3+2] Dipolar Cycloaddition of Cyclopropanes with Nitrosoarenes: An Approach to Isoxazolidines

The MgBr₂‐catalyzed formal [3+2] cycloaddition of donor–acceptor activated cyclopropanes with nitrosoarenes offers a novel approach to various structurally diverse isoxazolidines. The reactions, which are experimentally easy to conduct, occur with complete stereospecificity and perfect control of regioselectivity. Product isoxazolidines can be readily transformed into α‐amino lactones by reductive or decarboxylative N? O cleavage and subsequent lactonisation, and the N‐aryl bond cleavage is also possible under oxidative conditions.     

Transport properties of undoped and Br-doped PbTe sintered at high-temperature and pressure ≥4.0 GPa

The thermoelectric properties of nominally undoped PbTe and Br doped PbTe materials sintered at high-pressure and high-temperature (HPHT) have been studied. All samples show n-type semiconducting behavior with negative thermopower. For undoped PbTe, four different HPHT treatments were performed at pressures between 4.0 and 6.5 GPa. PbTe doped with Br at 0.5, 1.0, 2.0, 3.0×10¹⁹ cm⁻³ was HPHT treated at 4.0 GPa and 1045 °C. As the dopant concentration increases, the absolute thermopower decreases, thermal conductivity increases, and electrical resistivity decreases. At a nominal dopant concentration of 1.0×10¹⁹ cm⁻³, carrier mobility of 1165 cm²/V s and dimensionless thermoelectric figure-of-merit, ZT, of around 0.27 at 300 K were obtained. These results demonstrate that HPHT post-processing is a viable and controllable way of tuning the thermoelectric properties of PbTe-based materials.     

Ultra-high-stability,pH-resistant sol–gel titania poly(tetrahydrofuran) coating for capillary microextraction on-line coupled to high-performance liquid chromatography

A sol–gel titania poly(tetrahydrofuran) (poly-THF) coating was developed for capillary microextraction hyphenated on-line with high-performance liquid chromatography (HPLC). Poly-THF was covalently bonded to the sol–gel titania network which, in turn, became chemically anchored to the inner surface of a 0.25 mm I.D. fused silica capillary. For sample preconcentration, a 38-cm segment of the sol–gel titania poly-THF coated capillary was installed on an HPLC injection port as a sampling loop. Aqueous samples containing a variety of analytes were passed through the capillary and, during this process, the analytes were extracted by the sol–gel titania poly-THF coating on the inner surface of the capillary. Using isocratic and gradient elution with acetonitrile/water mobile phases, the extracted analytes were desorbed into the on-line coupled HPLC column for separation and UV detection. The sol–gel titania poly-THF coating was especially efficient in extracting polar analytes, such as underivatized phenols, alcohols, amines, and aromatic carboxylic acids. In addition, this coating was capable of extracting moderately polar and nonpolar analytes, such as ketones and polycyclic aromatic hydrocarbons. The sol–gel titania poly-THF coated capillary was also able to extract polypeptides at pH values near their respective isoelectric points. Extraction of these compounds can be important for environmental and biomedical applications. The observed extraction behavior can be attributed to the polar and nonpolar moieties in the poly-THF structure. This coating was found to be stable under extremely low and high pH conditions—even after 18 h of exposure to 1 M HCl (pH ≈0.0) and 1 M NaOH (pH ≈14.0).     

Amphiphilic polymers based on higher alkylene oxides: Synthesis and characterization by different chromatographic techniques

Homopolymers and block copolymers of higher epoxides (butene oxide and hexene oxide) are synthesized using 1-alkanols and polyethylene glycol monomethyl ether (PEG-MME) 1100 as initiators by anionic ring opening polymerization in bulk. Most of the samples were synthesized with controlled microwave heating in sealed vessels. Tri- and tetrablock copolymers with different repeat units in the individual blocks are synthesized by living polymerization with addition of the next monomer after complete consumption of the previous one. The products thus obtained are characterized using size exclusion chromatography (SEC), liquid chromatography under critical conditions (LCCC) and liquid adsorption chromatography (LAC).     

Stimuli‐Responsive Naphthalene Diimide as Invisible Ink: A Rewritable Fluorescent Platform for Anti‐Counterfeiting

Herein, we report an approach to combat counterfeiting and storage of valuable information based on the solid‐state fluorescence switching behavior of isoniazid functionalized naphthalene diimide (ISO_NDI) in response to an external stimuli (i. e., HCl vapor). The unique feature of ISO_NDI is further utilized to develop an invisible ink (ISO_NDI‐PVA) with commercial polymer polyvinyl alcohol (PVA). A solid‐state fluorescence recovery was observed while loading with HCl vapors. This exclusive property of the material could be applied directly as a security ink for confidential data storage purpose. Based on above strategy, we successfully realized the rewritable application by using ISO_NDI‐PVA ink and confirm its practical efficacy on various substrates by creating different patterns. The solid‐state fluorescence switching behavior of ISO_NDI‐PVA ink exhibited reversible on/off signal for multiple cycles under the influence of HCl/NH₃ vapors. Mechanistic investigation supports a clear participation of intermolecular charge transfer (ICT) phenomenon in the solid‐state fluorescence switching property. The ease of fabricating the ink with invisible to visible characteristics in response to HCl vapors provides new opportunities for exploring the application of ISO_NDI‐PVA as invisible ink for targeted security applications.     

Semisynthesis of Functional Glycosylphosphatidylinositol‐Anchored Proteins

Glypiation is a common posttranslational modification of eukaryotic proteins involving the attachment of a glycosylphosphatidylinositol (GPI) glycolipid. GPIs contain a conserved phosphoglycan that is modified in a cell‐ and tissue‐specific manner. GPI complexity suggests roles in biological processes and effects on the attached protein, but the difficulties to get homogeneous material have hindered studies. We disclose a one‐pot intein‐mediated ligation (OPL) to obtain GPI‐anchored proteins. The strategy enables the glypiation of folded and denatured proteins with a natural linkage to the glycolipid. Using the strategy, glypiated eGFP, Thy1, and the Plasmodium berghei protein MSP1₁₉ were prepared. Glypiation did not alter the structure of eGFP and MSP1₁₉ proteins in solution, but it induced a strong pro‐inflammatory response in vitro. The strategy provides access to glypiated proteins to elucidate the activity of this modification and for use as vaccine candidates against parasitic infections.     

Trace determination of parabens in cosmetics and personal care products using fabric‐phase sorptive extraction and high‐performance liquid chromatography with UV detection

A simple, fast, and sensitive analytical protocol using fabric‐phase sorptive extraction followed by high performance liquid chromatography with ultraviolet detection has been developed and validated for the extraction of five parabens including methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben. In the present work, sol‐gel polyethylene glycol coated fabric‐phase sorptive extraction membrane is used for the preconcentration of parabens (polar) from complex matrices. The use of fabric‐phase sorptive extraction membrane provides a high surface area which offers high sorbent loading, shortened equilibrium time, and overall decrease in the sample preparation time. Various factors affecting the performance of fabric‐phase sorptive extraction, including extraction time, eluting solvent, elution time, and pH of the sample matrix, were optimized. Separation was performed using a mobile phase consisting of water:acetonitrile (63:37; v/v) at an isocratic elution mode at a flow rate of 0.9 mL/min with wavelength at 254 nm. The calibration curves of the target analytes were prepared with good correlation coefficient values (r² > 0.9955). The limit of detection values range from 0.252 to 0.580 ng/mL. Finally, the method was successfully applied to various cosmetics and personal care product samples such as rose water, deodorant, hair serum, and cream with extraction recoveries ranged between 88 and 122% with relative standard deviation <5%.     

Electronic and vibronic contributions to two-photon absorption in donor-acceptor-donor squaraine chromophores

Many squaraines have been observed to exhibit two-photon absorption at transition energies close to those of the lowest energy one-photon electronic transitions. Here, the electronic and vibronic contributions to these low-energy two-photon absorptions are elucidated by performing correlated quantum-chemical calculations on model chromophores that differ in their terminal donor groups (diarylaminothienyl, indolenylidenemethyl, dimethylaminopolyenyl, or 4-(dimethylamino)phenylpolyenyl). For squaraines with diarylaminothienyl and dimethylaminopolyenyl donors and for the longer examples of 4-(dimethylamino)phenylpolyenyl donors, the calculated energies of the lowest two-photon active states approach those of the lowest energy one-photon active (1B(u)) states. This is consistent with the existence of purely electronic channels for low-energy two-photon absorption (TPA) in these types of chromophores. On the other hand, for all squaraines containing indolinylidenemethyl donors, the calculations indicate that there are no low-lying electronic states of appropriate symmetry for TPA. Actually, we find that the lowest energy TPA transitions can be explained through coupling of the one-photon absorption (OPA) active 1B(u) state with b(u) vibrational modes. Through implementation of Herzberg-Teller theory, we are able to identify the vibrational modes responsible for the low-energy TPA peak and to reproduce, at least qualitatively, the experimental TPA spectra of several squaraines of this type.