A chloride ion nanosensor for time-resolved fluorimetry and fluorescence lifetime imaging

In this work, the first CdSe/ZnS quantum dot (QD) photoluminescence lifetime based chloride ion nanosensor is reported. The acridinium dication lucigenin was self-assembled on the surface of negatively charged mercaptopropionic acid capped QDs to achieve QD-lucigenin conjugates. Upon attachment, a drastic decrease of the photoluminescence lifetime of both QD nanoparticles and lucigenin is observed by virtue of a charge transfer mechanism. Since lucigenin is a chloride-sensitive indicator dye, the photoluminescence decay of QD-lucigenin conjugates changes by adding chloride ion. The photoluminescence lifetime of the QDs in the conjugate increases after reacting with Cl(-), but also shows a concomitant decrease in the lucigenin lifetime immobilized on the surface. The photoluminescence lifetime of QD-lucigenin nanosensors shows a linear response in the Cl(-) concentration range between 0.5 and 50 mM. Moreover, the ratio τ(ave)(QD)/τ(ave)(luc) can be used as an analytical signal since the lifetime ratio presents a linear response in the same Cl(-) concentration range. The system also shows good selectivity towards most of the main anions and molecules that can be found in biological fluids. These nanosensors have been satisfactorily applied for Cl(-) determination in simulated intracellular media with high sensitivity and high selectivity. Finally, we demonstrate the potential application of the proposed nanosensor in confocal fluorescence lifetime imaging (FLIM). These results show the promising application of the QD-lucigenin nanosensors in FLIM, particularly for intracellular sensing, with the invaluable advantages of the time-resolved fluorescence techniques.     

Synthesis and conformational studies of peptido-squaramide foldable modules: a new class of turn-mimetic compounds

The β-turn unit is one of the most important secondary structure elements in proteins. The access to new conformationally controlled foldable modules can afford compounds with interesting bioactivities. Here, we describe a new family of peptido-squaramide foldable modules based on the considerable potential of the squaramide unit as a hydrogen bond donor and acceptor as well as the low rotational barrier of the C-N bond. The conformational analysis by NMR of these modules in chloroform and acetonitrile solution shows that a disecondary squaramide with the 4-aminobutyric acid in one of its substituents can mimic the β-turn structure driven by the formation of an intramolecular hydrogen bonded ten-membered ring. This structure, although flexible, has been successfully combined with dipeptide chains to induce the formation of a hairpin-like structure driven by the formation of several cross-strand intramolecular hydrogen bonds.     

Exploring aromatic chemical space with NEAT: novel and electronically equivalent aromatic template

In this paper, we describe a lead transformation tool, NEAT (Novel and Electronically equivalent Aromatic Template), which can help identify novel aromatic rings that are estimated to have similar electrostatic potentials, dipoles, and hydrogen bonding capabilities to a query template; hence, they may offer similar bioactivity profiles. In this work, we built a comprehensive heteroaryl database, and precalculated high-level quantum mechanical (QM) properties, including electrostatic potential charges, hydrogen bonding ability, dipole moments, chemical reactivity, and othe properties. NEAT bioisosteric similarities are based on the electrostatic potential surface calculated by Brood, using the precalculated QM ESP charges and other QM properties. Compared with existing commercial lead transformation software, (1) NEAT is the only one that covers the comprehensive heteroaryl chemical space, and (2) NEAT offers a better characterization of novel aryl cores by using high-evel QM properties that are relevant to molecular interactions. NEAT provides unique value to medicinal chemists quickly exploring the largely uncharted aromatic chemical space, and one successful example of its application is discussed herein.     

Ag(I) complexes with alkylidene-bis(2-aminopyrimidines) as building units for discrete metallomacrocyclic frames. A structural and solution study

Alkylidene-bis(2-aminopyrimidines) (pyr2Cx, x = 2-5) are useful ligands to interact with Ag(I) yielding discrete metallocycles. Crystal structures of the [(pyr2C2)Ag(NO3)]2 and [(H-pyr2C4)Ag(NO3)2]2 have been isolated where each macrocyclic moiety interacts with their surroundings through weak interactions, yielding 3D discrete structures, On the other hand, the solution study shows that the equilibrium constants for the formation of Ag(pyr2Cx)+ complexes are higher than the literature values for Ag(I) complexes with single pyrimidines, although the differences could be explained by invoking the solid-state structures of the Ag(I)-pyr2Cx complexes.     

Three-state 2',7'-difluorofluorescein excited-state proton transfer reactions in moderately acidic and very acidic media

2',7'-Difluorofluorescein (Oregon Green 488, OG488) is a novel fluorescein dye derivative which presents important advantages for improving the fluorimetric applications in the biomedical and biochemical sciences. In aqueous solution it displays four prototropic forms, namely cation (C), neutral (N), monoanion (M), and dianion (D). In previous works, we found (J. Phys. Chem. A 2005, 109, 734-747, 2840-2846) that OG488 undergoes excited-state proton transfer reactions, which may affect the results from applications using this dye. We established that the excited-state proton transfer (ESPT) reactions between neutral, monoanionic, and dianionic forms of OG488 are promoted by acetate buffer, and we characterized the ground and excited species involved. We also solved the kinetics of the prototropic reactions using global compartmental analysis. In the present paper, we extend our study on the ESPT reactions of OG488 to acidic media, in which only the three prototropic species cation, neutral, and monoanion coexist. We have solved the kinetics of the three-state ESPT reaction by means of global three-compartmental analysis of a fluorescence decay surface in moderately acidic media (pH between 1.1 and 3.0), recovering the kinetic and spectral parameters of this three-state system. This system is one of the most complex solved to date, due to the strong overlap of the absorption and emission spectra of the neutral and monoanionic forms of OG488. We also found that the cation behaves as "super" photoacid, showing a very high deprotonation rate constant (1.04 x 10(11) s(-1)) and an enhanced acidity. Therefore, we also carried out experiments at very high perchloric acid concentrations, dealing with some other effects which become noteworthy at these [H(+)]. The presence of xanthylium cation quenching due to "free" water molecules, and the reduction in the amount of water clusters acting as proton acceptors, are processes which alter notably the time course of the excited-species in this high [H(+)] range.     

Mineral content and botanical origin of Spanish honeys

Eleven elements (Zn, P, B, Mn, Mg, Cu, Ca, Ba, Sr, Na and K) were determined by inductively plasma coupled spectrometry in 40 honey samples from different places of Spain and four different botanical origins: Eucalyptus (Eucalyptus sp.), Heather (Erica sp.), Orange-blossom (Citrus sinensis) and Rosemary (Rosmarinus officinalis). K, Ca and P show the higher levels with average concentrations ranged between 434.1-1935 mg kg⁻¹ for K; 42.59-341.0 mg kg⁻¹ for Ca and 51.17-154.3 mg kg⁻¹ for P. Levels of Cu (0.531-2.117 mg kg⁻¹), Ba (0.106-1.264 mg kg⁻¹) and Sr (0.257-1.462 mg kg⁻¹) are the lowest in all honey samples. Zn (1.332-7.825 mg kg⁻¹), Mn (0.133-9.471 mg kg⁻¹), Mg (13.26-74.38 mg kg⁻¹) and Na (11.69-218.5 mg kg⁻¹) concentrations were found strongly dependent on the kind of botanical origin.Results were submitted to pattern recognition procedures, unsupervised methods such as cluster and principal components analysis and supervised learning methods like linear discriminant analysis in order to evaluate the existence of data patterns and the possibility of differentiation of Spanish honeys from different botanical origins according to their mineral content. Cluster analysis shows four clusters corresponding to the four botanical origins of honey and PCA explained 71% of the variance with the first two PC variables. The best-grouped honeys were those from heather; eucalyptus honeys formed a more dispersed group and finally orange-blossom and rosemary honeys formed a less distinguishable group.     

Coupling continuous flow systems to instruments based on discrete sample introduction

The interfaces between low-pressure continuous sample treatment systems and high-level information instruments such as gas chromatographs, capillary electrophoresis equipment and graphite furnace atomic spectroscopic instruments, which are characterized by conventional discrete sample introduction devices, are presented. The present and future developments are discussed of (directly) linking real samples and those analytical equipments with the main objective of avoiding or minimizing manually implemented preliminary operations of the analytical process. Received: 27 January 1998 / Revised: 5 March 1998 / Accepted: 7 March 1998     

On choosing a reference redox system for electrochemical measurements: a cautionary tale

The potential of a quasi-reference electrode can be determined by introducing an internal reference redox system (IRRS) which comprises either the oxidizable or reducible form of a reversible (and, ideally, outer-sphere) redox couple and then observing the cyclic voltammetric responses. The objective is to choose the IRRS so that the cyclic voltammetric response for the simultaneously present electroactive analyte system (ANS) can be observed independently of the IRRS response. We identify three fundamental paradigms describing the relative positioning of the IRRS and ANS on the potential scale, the operative redox components for the IRRS and ANS, and the starting potential (E _start), reversing potential (E _rev), and ending potential (E _end) for the cyclic voltammetric scan as follows: paradigm A, an optimal paradigm which can produce completely independent cyclic voltammetric responses for the IRRS or for ANS; paradigm B, a less-than-optimal paradigm which can produce an independent cyclic voltammetry (CV) response for the ANS or a mixed response for the IRRS with that response on top of the ANS response; paradigm C, a problematic paradigm that can produce an independent CV response for the IRRS or a mixed response for the ANS with that response on top of the IRRS response; and any mixed response produces a thermodynamically favored redox cross-reaction which couples the IRRS and ANS systems and which can complicate the analysis of the ANS and IRRS responses. The conclusion is that paradigm C is to be avoided.     

SALS,WAXS and mechanical properties of heat‐treated thermotropic polymers

The influence of heat treatment on the texture, microstructure and tensile mechanical properties of extruded thin films of a series of high‐performance thermotropic liquid crystal polymers (LCPs) was investigated. LCPs based on random units of hydroxybenzoic acid (B), hydroxynaphthoic acid (N), terephthalic acid (TA) and biphenol (BP) were kindly supplied by the former Hoechst Celanese Corp as 50 µm thick extruded tapes. The LCPs, denoted B‐N, COTBP and RD1000, have B and N as common comonomers and vary the other comonomers. Thus, this study also enables the investigation of the influence of monomer composition on microstructure and mechanical properties. Heat treatments were carried out at temperatures close to the solid‐to‐nematic transition (T_s→n) for periods up to 5 h, under dry air conditions. The thermal treatment produced either two endotherms or a small increase of T_s→n (B‐N and RD1000), or increased significantly T_s→n (COTBP). Moreover, when heat treatment was carried out approximately 40°C below the respective T_s→n, the mechanical Young's modulus, E, along the extrusion axis, increased for all LCPs. Strikingly, for COTBP, E increased over 100% relative to the as‐extruded film. The results also showed that the optimum treatment time for improving the Young modulus, under dry air atmosphere, was between 3 and 4 h. Wide‐angle X‐ray scattering showed a significant sharpening of crystalline reflections and concentration of the 002 meridional reflection as a result of thermal treatment, suggesting the elimination of defects and a better alignment of the molecular chains along the extrusion axis. This would explain the increase in tensile modulus. Copyright © 2013 John Wiley & Sons, Ltd.     

The Preparation Of 2-[4,5-Dihydro-3-Aryl-5-Isoxazolyl]-Phenols From C(α),O-Dilithiooximes and Lithiated Hydroxyaryl Aldehydes

C(a), O-Oximes were dilithiated in excess lithium diisopropylamide, and the resulting intermediates were condensed with lithiated hydroxyphenyl aldehydes and related materials and cyclized with acid to afford 2-[4,5-dihydro-3-aryl-5-isoxazolyl]phenols, substituted 4,5-dihydroisoxazoles (2-isoxazolines).