Aqueous-phase behavior of natural glycolipid biosurfactant mannosylerythritol lipid A: sponge, cubic, and lamellar phases

The aqueous-phase behavior of mannosylerythritol lipid A (MEL-A), which is a glycolipid biosurfactant produced from vegetable oils by yeast strains of the genus Pseudozyma, was investigated using polarized optical microscopy, small-angle X-ray scattering (SAXS), and differential scanning calorimetry (DSC). MEL-A was found to self-assemble into a variety of distinctive lyotropic liquid crystals including sponge (L3), bicontinuous cubic (V2), and lamella (Lalpha) phases. On the basis of SAXS measurements, we determined the structure of the liquid crystals. The estimated lattice constant for Lalpha was 3.58 nm. DSC measurement revealed that the phase transition enthalpies from the liquid crystal to the fluid isotropic phase were in the range of 0.22-0.44 kJ/mol. Although the present MEL-A phase diagram closely resembled that obtained from relatively hydrophobic poly(oxyethylene) or fluorinated surfactants, the MEL-A L3 region was spread considerably over a wide temperature range (20-65 degrees C) compared to L3 of those surfactants: this is probably due to the unique structure which is molecularly engineered by microorganisms. In this paper, we clarify the aqueous phase diagram of the natural glycolipid biosurfactant MEL-A, and we suggest that the obtained lyotropic crystals are potentially useful as novel nanostructured biomaterials.     

Performance of the High Resolution,Multi-collector Helix MC <Emphasis Type="Italic">Plus</Emphasis> Noble Gas Mass Spectrometer at the Australian National University

Performance of the Helix MC Plus noble gas mass spectrometer installed at the Australian National University (ANU) is reported. Results for sensitivity, mass discrimination and their linearity against partial pressure of noble gases, and mass resolution of the mass spectrometer are presented, and the results are compared with those of conventional noble gas mass spectrometers. The application of the five detectors on the Helix MC Plus in measuring various noble gas isotopes in multi-collector modes and the integration of the software drivers of peripheral hardware devices into the controlling program Qtegra of the mass spectrometer are discussed. High mass resolution (>1800) and mass resolving power (>8000) make this mass spectrometer unique in noble gas cosmo-geochemistry. It provides the capability to measure isobaric interference-free noble gas isotopes in multi-collector mode, significantly improves the accuracy to determine isotopic ratios, and greatly increases the efficiency of data acquisition.

Open image in new window

Graphical Abstract ?

     

Photo-isomerization of spiropyran-modified cationic surfactants

Photo-induced isomerization of a newly synthesized surfactant, 1'(6-trimethylammoniododecyl)-3('),3(')-dimethyl-6-nitrospiro-(2H-1-benzopyran-2,2'-indoline) bromide (SP-Me-12), has been characterized on the basis of the UV-vis absorption spectra and the surface tension data. Visible light (lambda>420 nm) incident on the aqueous solution of SP-Me-12 results in the isomerization from the merocyanine (MC) form to the spiropyran (SP) form; this structural change was confirmed by a complete disappearance of a characteristic absorption peak of the MC form. When the surfactant solution is stored in the dark, the isomerized SP form reverts to the original MC form, however, the reverse isomerization rate is observed to be considerably slower than that seen for visible light irradiation (from the MC form to the SP form). A reversible change in the surface tension of the aqueous surfactant solution is observed for the photo-induced isomerization: the surface tension measured below the critical aggregation concentration decreases as a result of the visible light irradiation and it is gradually reversed to the original level during the equilibration in the dark.     

Development of human serum certified reference material for quantification of polychlorinated biphenyls

Human serum certified reference material (CRM), NMIJ CRM 7407-a, for the analysis of polychlorinated biphenyls (PCBs) was developed by the National Metrology Institute of Japan. A pool of commercially available human serum was used as a raw material of the CRM. This sample is in the form of a liquid comprising approximately 4 g stored in a cryogenic polypropylene vial. Homogeneity assessment was performed, and the material was homogeneous enough for PCB 118, PCB 138, PCB 153, and PCB 194: the relative uncertainties due to inhomogeneity were 2.5–10.5%. The results obtained from the stability assessment indicated that the target PCBs were stable: the relative uncertainties due to instability were 0–14.7%. The certification was carried out using two different types of GC columns for each target PCB to avoid interferences on GC separation; the certified values of the target PCBs (PCB 118, PCB 138, PCB 153, and PCB 194) were 9.7–129.8 ng/kg. This is the first frozen human serum CRM in which PCBs were determined by isotope dilution mass spectrometry.     

Characteristics of a zirconia composite membrane fabricated by a laser firing method

By a method of laser firing, a high zirconia containing (70%) composite membrane on porous ceramic tubing was successfully fabricated. The laser sintered composite membrane was characterized by gas separation/permeation experiments. In the separation experiment of a CO₂---CH₄ gaseous mixture, it was found that the separation factor of CH₄ over CO₂ was 1.15. In the pure gases permeation experiment, it was found that Knudsen diffusion is considered to be predominant in the permeation mechanism for pure gases H₂, He, CH₄, N₂, O₂, and CO₂, and the permeation mechanism of H₂O at lower temperature depends mainly on surface diffusion and on Knudsen diffusion at higher temperature.     

Effect of drying on the mesoporous structure of sol-gel derived silica with PPO-PEO-PPO template block copolymer

The effects of drying method on the pore structure of mesoporous silica were studied from the viewpoint of enhancing closed porosity in mesoporous silica. The mesoporous silica was prepared via a sol-gel process using polyethyleneoxide-polypropyleneoxide-polyethyleneoxide (PEO-PPO-PEO) triblock copolymer (Pluronic P123) as the structure-directing template. The closed porosity was evaluated from the apparent mass density of the sample measured by a helium pycnometer. These mesoporous silicas were also characterized by transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and nitrogen adsorption. The drying method was shown to be responsible for the finally templated mesoporous structure of the silica. More rapid drying is more preferable for enhancing the closed porosity of the mesoporous silica. The closed pores were formed by immediate immobilization of copolymer molecular assemblies in the silica matrix due to the instant removal of the solvent and solidification at higher temperatures. The drying method, mainly affecting the drying rate, is highly influential on the finally replicated mesoporous structure in silica.     

Temperature-induced sedimentation to dispersion of ionic vesicles

We present a temperature-induced sedimentation/dispersion transition of ionic vesicles in the system of alkyldimethylamine oxide hemihydrochloride (CnDMAO.1/2HCl) with a hydrocarbon chain length of 12-16 (n = 12, 14, and 16) and sodium 2-naphthalenesulfonate (NaNphS). The temperature-sensitive sedimentation/dispersion of ionic vesicles took place around a temperature of 50 degrees C, which was weakly dependent on the alkyl chain length. The combined effect of the thermally induced dissociation of the counterions from the vesicle and a hydrogen bonding between the nonionic and the cationic head groups is likely to be responsible for this unique behavior.     

Regulation of saccharide binding with basic poly(ethynylpyridine)s by H+-induced helix formation

A basic host polymer exhibiting pH-regulatable saccharide recognition has been investigated. Poly(m-ethynylpyridine) bearing dialkylamino groups forms helical complexes with saccharides to show induced circular dichroism (ICD). When trifluoroacetic acid was titrated on these complexes, the ICD was gradually enhanced until the amount of the acid reached ca. 0.5 molar equivalence versus the pyridine rings in the polymer, and further addition of the acid suppressed the ICD. The proper addition of the acid also increased the binding constants between the polymer and saccharides. These findings would be due to stabilization of the helical structure consisting of cisoid conformations for each of the adjacent pyridine pairs, which were caused by half-protonation of the pyridine rings. Computational analyses indicated that the pyridinium-pyridine dimeric structure prefers its cisoid conformation to its transoid one.     

Synthesis of 2,3,5,6-tetrahydro-4H-1,4-thiazin-3-one 1,1-dioxides from methyl (styrylsulfonyl)acetate

Methyl (styrylsulfonyl)acetate ( 1 ) was shown to be a useful building block for the synthesis of 5-phenyl-2,3,5,6–4H-tetrahydro-1,4-thiazin-3-one (2), its 4-amino 3 , and 4-hydroxy 4 derivatives. Their 2-spirocyclopropanes 9, 10 , and 11 , and 2,7-diphenyl-6,7-dihydro-8H-pyrimido[5,4-b][1,4]thiazinc 5,5-dioxide ( 18 ) were also prepared from 1 .