Singlewall carbon nanotubes covered with polystyrene nanoparticles by in‐situ miniemulsion polymerization

This work is to make carbon nanotubes dispersible in both water and organic solvents without oxidation and cutting nanotube threads. Polystyrene‐singlewall carbon nanotube (PS‐SWNT) composites were prepared with three different methods: miniemulsion polymerization, conventional emulsion polymerization, and mixing SWNT with PS latex. The two factors, crosslinking and surface coverage of PS are important factors for the mechanical and electrical properties, including dispersion states of SWNT in various solvents. The PS‐SWNT composite prepared via a conventional emulsion polymerization showed SWNT bundles entirely covered with PS, whereas the PS‐SWNT composite prepared via a miniemulsion polymerization showed SWNT partially covered with crosslinked PS nanoparticles. The method of mixing SWNTs with PS latex did not show the well dispersed state of carbon nanotubes because PS was not crosslinked and was dissolved in a solvent, and nanotubes separated from PS precipitated. So the PS nanoparticle‐SWNT composite had lower electrical resistance, and higher mechanical strength than the other composites made by the latter two methods. As the amount of SWNT increases, the bare surface area of SWNT increases and the electrical conductivity increases in the composite made by the miniemulsion polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 573–584, 2006     

Template synthesis in the nickel(II)–thiocarbohydrazide–propanone triple system

The complexing process proceeding in the Ni^II–thiocarbohydrazide (H₂N–H–NC(=S)–NH–NH₂)–propanone triple system in EtOH solution and nickel(II)hexacyanoferrate(II) gelatin-immobilized matrix has been studied. It has been found that in the first case, template synthesis leading, as a minimum, to formation of three coordination compounds of Ni^II with (N,N,S,S)-donor tetradentate ligands having NiL¹, NiL² and NiL³compositions where L¹ is 4,6,6-trimethyl-2,3,7,8-tetraazanonen-3-di(thiohydrazide)-1,9, L² is 4,6,6,12-tetrametyl-1,9-dithio-2,3,7,8,10,11-hexaazatridekadien-3,11-hydrazide-1 and L³ is 2,8,10,10,16-pentamethyl-5,13-dithio-3,4,6,7,11,12,14,15-octaazaheptadekatrien-2,7,15 is observed, whereas in the gelatin-immobilized matrix, a complexing process in the system considered does not occur.     

Detection of vibration-rotational band 5-0 of 12C16O X 1sigma+ with cavity ringdown absorption near 0.96 microm

We have recorded extremely weak absorption in the overtone band 5-0 of 12C16O X 1sigma+ near 0.96 microm with cavity ringdown spectroscopy; the light source was a Raman-shifted dye laser pumped with a frequency-doubled Nd:YAG laser. This band shows lines in branch P to be much more intense than corresponding lines in branch R, in contrast to all lower overtone bands v-0 (v = 1-4). This reversal in relative intensity is explained quantitatively in terms of a radial function for the electric dipolar moment of CO. We have estimated absorption line strengths for P3-P18 in band 5-0 of 12C16O; these strengths are consistent with a pure vibrational matrix element <5/p(x)/0> = (3.6 +/- 0.3) x 10(-36) C m of the electric dipolar moment p(x), a Herman-Wallis coefficient C0(5) of about -0.1, and a band strength of (5.1 +/- 1.3) x 10(-29) m at 293 K.     

Chemische Vitamin D<Subscript>3</Subscript>-Bestimmung in Lebertran

The different aspects of Vitamin D₃ determination and the data reported in the literature are discussed. The spectrophotometric determination of Vitamin D₃ in cod-liver oil is carried out after the alkaline saponification, extraction of unsaponified parts, precipitation of accompanying sterols and the column- and thin-layer chromatographic purification and separation of vitamin D₃ on 40 cm plates from other vitamins. The dyestuff α-naphtholbenzein is suited well as standard substance for the better location and identification of vitamin D₃ zone on the thin-layer plate. The results obtained from the chemical method were checked through the simultaneous biological determination.     

The use of a chelating resin column for preconcentration of trace elements from sea-water in their determination by neutron-activation analysis

A Chelex-100 resin column has been employed for the preliminary concentration of trace elements in water samples before their determination by neutron-activation analysis. The column, filled with a 1:1 mixture of the resin (50-100 mesh) and Pyrex glass powder of the same mesh-size, is shown to maintain a constant flow-rate and give reproducible results. By a combination of preconcentration and neutron-activation analysis it is possible to determine Ba, Ca, Cd, Ce, Co, Cr, Cu, Fe, La, Mg, Mn, Sc, U, V and Zn in sea-water and/or fresh water simultaneously at the parts per milliard level.     

The Structure of the Antibiotic Hedamycin. I. Chemical,Physical and Spectral Properties

Interpretation of the chemical and spectral (IR., UV., ¹H- and ¹³C-NMR.) properties of the antitumor antibiotic hedamycin (C₄₁H₅₀N₂O₁₁) suggests that the molecule contains a methyl substituted 1-hydroxyanthraquinone nucleus, an α, β-unsaturated ketone, two sugar-like tetrahydropyran rings ( 4 and 8 ) and an aliphatic chain 2 , presumably with an epoxy group (see the Scheme).     

N-isobutyloxycarbonylation for improved detection of 3'-hydroxystanozolol and its 17-epimer in doping control

An improved screening method was developed for 3'-hydroxystanozolol and its 17-epimer in human urine involving gas chromatography-mass spectrometry (GC-MS) with N-isobutyloxycarbonyl (isoBOC) and O-trimethylsilyl (TMS) derivatization. A procedure was reported previously for the pentane extraction of many steroids from urine in doping control, but it was not suitable for the detection of stanozolol metabolites. Compared with the n-pentane extraction method, which gave a poor recovery (< 10%), isoBOC extraction resulted in a good recovery (> 80%). The sensitivity and specificity of mixed N-isoBOC-O-TMS derivatization were adequate for the detection of 3'-hydroxystanozolol and its 17-epimer when 3 ml of urine was used with spiking at a level of 2 ng ml-1. When applied to a stanozolol-positive urine sample, the proposed method allowed rapid and sensitive screening for the detection of 3'-hydroxystanozolol and its 17-epimer.     

Teaching Operational Research Technique

Good technique, i.e. competence in carrying out operational research, is as vital for the practitioner to acquire as competence in the traditional ‘techniques’. It is suggested that universities should teach students how to conduct simple projects prior to alerting them to more sophisticated methodological issues.As an aid to this task, the traditional five or six parts of an operational research project are broken down and extended into 39 steps, and regrouped into three phases. Also, five skills are identified as being conceptually essential to "good" operational research, which students can develop through tackling suitable case studies.     

Palladium salicylaldimine complexes containing boronate esters

Reactions of salicylaldehydes with boronate ester derivatives of aniline have been examined. Addition of these Schiff base ligands to palladium acetate or Na₂PdCl₄ afforded novel boron-containing trans-bis(N-arylsalicylaldiminato) palladium complexes.Condensation of salicylaldehyde (2-HOC₆H₄C(O)H) with H₂NC₆H₄Bpin (pin=1,2-O₂C₂Me₄) afforded the boron-containing Schiff bases, 2-HOC₆H₄C(H)=NC₆H₄Bpin (1–3a). Similar reactivity with 2-hydroxy-5-nitrobenzaldehyde and 2-hydroxy-1-naphthaldehyde gave the corresponding Schiff bases (1-3b) and (1-3c), respectively. Reaction of Schiff bases (2) and (3) with palladium acetate or Na₂PdCl₄ afforded complexes of the type PdL₂ (4,5), where L=deprotonated Schiff base. The molecular structure of the nitro-salicylaldehyde 4-Bpin palladium complex (5b) was characterized by an X-ray diffraction study. All new palladium compounds have been characterized fully and tested for their antifungal activity against Aspergillus niger and Aspergillus flavus.