Preparation of ω-tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides: Useful reagents for the synthesis of 1-(ω-mercaptoalkyl)-1,2-dihydrobuckminsterfullerenes (C60)

ω-Tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides are prepared as Grignard reagents containing protected mercaptoalkyl chains, which are useful for the direct introduction of ω-mercaptoalkyl chains to electrophiles. In order to prove the usefulness of these reagents, they were reacted with buckminsterfullerene (C₆₀) to give 1-(ω-mercaptoalkyl)-1,2-dihydrobuck minsterfullerenes after the deprotection of THP group with TFA.     

Determination of Dextromethorphan and its Metabolite Dextrorphan in Human Hair by Gas Chromatography–Mass Spectrometry

An analytical method has been developed for determination of dextromethorphan (DMP) and dextrorphan (DRP) in human hair by gas chromatography–mass spectrometry (GC–MS). Hair samples (30 mg) were washed with distilled water and acetone and cut into small fragments (<1 mm) before extraction with methanol. The extracts were evaporated to dryness and then derivatized by use of BSTFA containing 1% TMCS, for preparation of the trimethylsilyl (TMS) derivative of DRP. The extract (1 μL) was then injected into the GC–MS. Recoveries of DMP and DRP at 7.0 and 22.5 ng mg^?1 were in the range 90.6–97.2% with intra-assay and inter-assay precision of less than 5.7% and 4.7%, respectively. LOD and LOQ were, respectively, 0.67 and 2.13 ng mg^?1 for DMP and 0.14 and 0.47 ng mg^?1 for DRP. The responses were linear with correlation coefficients (r > 0.9995) for the drugs studied. The applicability of the method was proven by analysis of authentic hair samples.     

Controlled growth of calcium carbonate by poly(ethylenimine) at the air/water interface

Two metastable calcium carbonate polymorphs, hemispherical vaterite and needle-like aragonite, are selectively formed at the air/water interface by the mediation of poly(ethyleneimine)(with molecular weights of 25000 and 2000, respectively) dissolved in supersaturated calcium bicarbonate solution.     

Suppressed beta-hydride elimination in palladium-catalyzed cascade cyclization-coupling reactions: an efficient synthesis of 3-arylmethylpyrrolidines

[formula: see text] A novel type of palladium-catalyzed cascade cyclization-coupling reaction that proceeds with suppressed beta-hydride elimination has been found. One of the N-sulfonyl oxygens is suggested to coordinatively stabilize an alkylpalladium intermediate, thus preventing the intermediate from the usual beta-elimination. This is the first sequential palladium-catalyzed coupling reaction where the Suzuki and Heck reactions can compete. The reaction provides an efficient synthetic route to 4-methylene-3-arylmethylpyrrolidines, which are not readily available by other routes.     

Preparation of holographic gratings of liquid crystals dispersed in polyurethane acrylates under controlled reaction conditions.

Transmission gratings of holographic polymer-dispersed liquid crystals (HPDLC) are prepared under controlled reaction conditions by adding various amounts of chain-transfer agent (CTA). The resulting films have a higher gel content with lower cross-link density, less dark reaction, less grating shrinkage with much smoother LC/polymer interfaces, smaller induction period, and fast saturation of diffraction efficiency, which shows a maximum of 95 % with 1 % CTA. An optimum LC content of 35 % is verified on the basis of morphology and reaction kinetics.     

Studies on mass production of transformed Panax ginseng hairy roots in bioreactor

The growth properties of Panax ginseng hairy roots transformed by Agrobacterium rhizogenes were compared between flask and aerated column or stirred bioreactor. In flask cultures, sucrose, initially 30 g/L, was nearly exhausted after 45 d of culture. The pH of the medium dropped from 5.5 to 4.96 after 10 d, but afterward it gradually increased to 6.4. After 45 d, hairy roots grew about 16-folds. The growth rate of hairy roots in air-bubble column or stirred bioreactor cultures was 1.13 (1.11) to 1.23 (1.20) g fresh wt (dry wt)/(g of cells·d), respectively. For both bioreactors, growth was about three times as high as in the flask cultivation.     

Surface-enhanced Raman study of organic sulfides adsorbed on silver

The surface-enhanced Raman scatterings of dimethyl sulfide, diethyl sulfide and dimethyl disulfide have been investigated in silver sol. The dimethyl disulfide molecule decomposes on silver to the corresponding mercaptide implying facile cleavage of its S---S bond. The C---S bond in dialkyl monosulfide appears not to cleave on silver. For diethyl sulfide, the C₂ conformation seems to be favorable on silver than other conformations.     

Polyarylate–polystyrene block copolymer from macro-azoinitiator: Synthesis and its thermal properties

A macro-azoinitiator containing polyarylate segment and azo group was prepared by the solution polycondensation of azobiscyanopentanoyl chloride and hydroxy-terminated polyarylates having viscosity-average molecular weights of 6200, 8100, and 12 400. These macro-azoinitiators were used in the radical polymerization of styrene to synthesize polyarylate-polystyrene block copolymers. Thermal properties measured by the differential scanning calorimetry indicated the phase separated morphology of the block copolymers except at low molecular weight of the block constituents. © 1993 John Wiley & Sons, Inc.     

Quantitation of trimethyl amine by headspace gas chromatography-mass spectrometry using a base-modified column

Headspace gas chromatography-mass spectrometry (GC-MS) has been successfully applied to the analysis of the highly volatile species trimethyl amine (TMA). TMA quantitation in fiberglass insulation resins (ultimately used by the automotive and building products industries) is of interest because of its highly odoriferous nature. The release of TMA from fiberglass insulation products is the principal component responsible for the "fishy" odor encountered in automobiles. Currently, the industry standard for the analysis of TMA involves injecting an aqueous insulation extract into the GC-MS equipped with a polyethylene glycol column. Several problems inherent in this analysis prohibit consistent performance and enhance the possibility for wide variations in the quantitative results. This article reports the development of a new approach to the quantitation of TMA from fiberglass insulation between the levels of 1 and 150 ppm.