Origin of Antibacterial Activity of ZnO Nanoparticles: The Roles of Protonic and Electronic Conductions

To elucidate the origin of antibacterial activity of ZnO nanoparticles, a reactive oxygen species (ROS) mechanism is systematically investigated based on electronic and protonic conductions. While the enhancement of antibacterial activity by an increase in electronic conductivity is marginal, an apparent improvement is observed by in the increase of protonic conductivity in terms of the surface basicity. This study first demonstrates that antibacterial activity can be enhanced by controlling the surface basicity of solid particles. The basicity of ZnO can be modulated by doping alkaline‐earth oxides such as MgO and CaO, and it results in the increase of hydroxyl defects on the surface of solid particles. The basicity shows a strong dependency on mobile OH concentrations. The increase of ROS hydroxyl radicals is confirmed by Mg (ZMO) or Ca‐doping (ZCO), which shows high antibacterial activity, and Ca‐doped ZnO exhibits the highest performance. It is clearly observed that the antibacterial activity is proportional to the basicity, which is controlled by the mobile OH formation. While both electrons and hydroxyl species are required for ROS reactions, it is concluded that the formation of hydroxyl species is a key factor in improving the antibacterial activity in ZnO.     

Fabrication of BixPdy bimetallic materials characterized by catalytic activity at low temperature: Nitro reduction and Suzuki−Miyaura coupling reactions under green conditions

A simple method for synthesizing the Bi_xPd_y bimetallic particles is described. The structure, composition distribution and size of synthesized Bi_xPd_y bimetallic particles were characterized using a number of analytical techniques. The Bi:Pd atomic ratio (x:y) of the nanoparticles was determined to be approximately 1:3 (Bi₂₄Pd₇₆), 1:1 (Bi₅₄Pd₄₆) and 3:1 (Bi₇₄Pd₂₆). The (111) diffraction peaks within the X-ray diffraction patterns of the bimetallic nanoparticles shifted from 39.9° to 38.5° as the Bi content increased from 0% to 75%. The d-spacings calculated from the 2θ data of (111) planes were 2.33, 2.34, 2.32 and 2.26 nm for nanoparticles with a Bi:Pd atomic ratio of 3:1, 1:1, 1:3 and 0:1 respectively. The crystalline properties of the surface of the Bi_xPd_y bimetallic nanoparticles were observed in high-resolution transmission electron microscopy analysis. The d-spacings between the adjacent lattice planes were measured on the surface of Bi_xPd_y bimetallic nanoparticles by averaging 10 lattice fringes distance. A regular face-centered cubic lattice was observed throughout the prepared Bi_xPd_y bimetallic nanoparticles. The lattice d-spacing of the Bi₃Pd₁, Bi₁Pd₁ and Bi₁Pd₃, bimetallic nanoparticles was approximately 2.34, 2.33 and 2.32 Å, respectively, which can be indexed to the (111) planes. These measurements correspond to the values calculated using the Bragg equation (d = nλ/2sinθ). The catalytic activity of Bi_xPd_y bimetallic nanoparticles was determined for the nitro compound reduction and Suzuki-Miyaura coupling reactions under green conditions (in an aqueous solution). Bi₁Pd₃ nanoparticles were shown to provide the best catalytic performance during both reactions, resulting in a yield of 98% in both cases.     

Luminescent characteristics of CaTiO3:Pr thin films prepared by pulsed laser deposition method with various substrates

CaTiO₃:Pr³⁺ films were deposited on different substrates such as Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica using pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by XRD and SEM measurements. The films grown on the different substrates have different crystallinity and morphology. The FWHM of (2 0 0) peak are 0.18, 0.25, 0.28, and 0.30 for Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica, respectively. The grain sizes of phosphors grown on different substrates were estimated by using Scherrer's formula and the maximum crystallite size observed for the thin film grown on Al₂O₃ (0 0 0 1). The room temperature PL spectra exhibit only the red emission peak at 613 nm radiated from the transition of (¹D₂ → ³H₄) and the maximum PL intensity for the films grown on the Al₂O₃ (0 0 0 1) is 1.1, 1.4, and 3.7 times higher than that of the CaTiO₃:Pr³⁺ films grown on MgO (1 0 0), Si (1 0 0), and fused Sillica substrates, respectively. The crystallinity, surface morphology and luminescence spectra of thin-film phosphors were highly dependent on substrates.     

The shear modulus of the human vocal fold in a transverse direction

The aim of this study was to measure the shear modulus of the vocal fold in a human hemilarynx, such that the data can be related to direction of applied stress and anatomical context. Dynamic spring rate data were collected using a modified linear skin rheometer using human hemilarynges, and converted to estimated shear modulus via application of a simple shear model. The measurement probe was attached to the epithelial layer of the vocal fold cover using suction. A sinusoidal force of 3g was applied to the epithelium, and the resultant displacement logged at a rate of 1kHz. Force measurement accuracy was 20microg and position measurement accuracy was 4microm. The force was applied in a transverse direction at the midmembranous point between the vocal process and the anterior commissure. The shear modulus of the three female vocal folds ranged from 814 to 1232Pa. The shear modulus of the three male vocal folds ranged from 1021 to 1796Pa. These data demonstrate that it is possible to obtain estimates for the shear modulus of the vocal fold while preserving anatomical context. The modulus values reported here are higher than those reported using parallel plate rheometry. This is to be expected as the tissue is attached to surrounding structures, and is under natural tension.     

Do the generalized Fock-state wave functions have some relations with classical initial condition?

We examine whether the general type Fock-state wave functions for the harmonic oscillator have some relations with the classical initial condition.     

Wide tuning characteristics of double-ring coupled lasers

The wide tuning characteristics of double-ring coupled lasers with/without an extended waveguide are analyzed and optimized using the scattering matrix formalism. To obtain the optimum design schemes of the tunable laser diodes, the cross coupling ratios of two rings, the tuning enhancement factor, the propagation loss of passive waveguides, the optical gain of an active region, and the back and front-facet reflectivity of the waveguide are taken into account. When the coupling ratio of the ring and input/output waveguides is fixed, the extinction ratio and the linewidth are decreased as the tuning enhancement factor is increased, while the tuning range is increased.     

Laser spectroscopy of CaF2:Eu:Sm thin films grown by pulsed laser deposition

Thin films of CaF₂ co-doped with low concentrations of Eu and Sm ions were grown by pulsed laser deposition (PLD) using a KrF (λ=248 nm) as the ablation source. To the best of our knowledge, the work presented here is the first report of rare-earth-doped CaF₂ films grown by PLD with this source. Combined laser excitation-emission spectroscopy was used to map out electronic transitions of Eu³⁺ with ⁷F₀→⁵D₁ excitation and the ⁵D₀→⁷F₁ emission. At the low concentrations used here the crystal field center of cubic symmetry is dominant in the films that are same for laser targets. However, charge compensated centers are present in the bulk crystal precursor. The removal of the charge compensated centers in the films and the target is likely caused by the target preparation where high pressure and temperature were applied.     

Power flow analysis for a floating sandwich raft isolation system using a higher-order theory

A higher-order sandwich theory is implemented in conjunction with an equivalent mobility-based power flow progressive method to determine power flow for a sandwich configured floating raft vibration isolation system. The power spectrum changes in whole frequency range effectively when core materials’ properties change. It is also shown that the loss factors of the sandwich configured floating raft influence the power flow transmitted to the foundation effectively in the medium- to high-frequency range and that the resonant peak cannot be avoided by increasing damping only in high-frequency ranges which is not found in floating raft isolation systems with isotropic beams.