Syntheses of the Saturated Analogues of 4-Nitrophenol and 4-Nitroaniline

Two syntheses for 4-nitrocyclohexanol and 4-nitrocyclohexanamine are presented. Both conveniently start from commercially available 4-aminocyclohexanol.     

Material profile influences in bulk‐heterojunctions

The morphology in mixed bulk‐heterojunction films are compared using three different quantitative measurement techniques. We compare the vertical composition changes using high‐angle annular dark‐field scanning transmission electron microscopy with electron tomography and neutron and x‐ray reflectometry. The three measurement techniques yield qualitatively comparable vertical concentration measurements. The presence of a metal cathode during thermal annealing is observed to alter the fullerene concentration throughout the thickness of the film for all measurements. However, the absolute vertical concentration of fullerene is quantitatively different for the three measurements. The origin of the quantitative measurement differences is discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1291–1300     

Light intensity and image visualization of GDI injector sprays according to nozzle hole arrangements

The light intensity measurement and image visualization of multi-hole injection spray due to different hole arrangements and hole numbers were investigated. The light intensities and behavior characteristics of the GDI spray were analyzed through the axial and diagonal spray penetration, cone angle, and spray area from the spray images by using the image visualization system and image analysis system. The atomization performance of GDI injectors was analyzed by the local and overall Sauter mean diameter (SMD) measurement.     

Enhanced reactivity and enantioselectivity in catalytic glyoxylate-ene reactions using chiral bis(oxazoline)–copper complex in an ionic liquid

An optimal hydrophobic ionic liquid was discovered as a solvent for highly enantioselective glyoxylate-ene reactions catalyzed by a chiral bis(oxazoline)–copper complex. The reactivity and stereoselectivity were highly dependent upon the property of the ionic liquids; reactions between olefins and ethyl glyoxylate in [Bmim]SbF₆ at ambient temperature provided remarkably enhanced reactivity and stereoselectivity, which greatly exceed those of the corresponding reactions in dichloromethane. Furthermore, the metal–ligand complex was readily recycled up to eight times while exhibiting no significant decrease in reaction efficiency.     

Fabrication and evaluation of bacterial cellulose-polyaniline composites by interfacial polymerization

The fabrication and evaluation of nanocomposites based on microbial cellulose and polyaniline (PANi) are described. Microbial cellulose, so called, bacterial cellulose (BC) was introduced to interfacial polymerization of aniline. Two different phases based on water and chloroform made it easy for nanosized PANi particles to be synthesized on BC. Without any help of a surfactant or templates, BC played a critical role of supporting the growth of PANi. As a function of aniline concentration, the corresponding PANi content and volume resistivity were checked. From morphological images observed by FE-SEM, PANi nanoparticles were densely arrayed along every fiber of BC. The conjugated backbone of PANi was thought to contribute to the improvements of thermal stability of PANi/BC composites. The stiffness and brittleness of PANi were compensated by more ductile BC, suggesting BC can be a promising substrate for it. By the simple and facile interfacial polymerization, the electrical conductivity of PANi/BC composites reached up to 3.8?×?10^?1?S/cm when 0.32?M of aniline was used. This PANi/BC nanocomposite can be useful in applications requiring biocompatibility and electrical conductivity such as biological and chemical sensors.     

Determination of docetaxel in rat plasma and its application in the comparative pharmacokinetics of Taxotere and SID530, a novel docetaxel formulation with hydroxypropyl‐β‐cyclodextrin

In this study, a sensitive, simple and reliable method for the quantification of docetaxel in rat plasma was developed and validated using liquid chromatography–tandem mass spectrometry (LC‐MS/MS). The plasma samples were prepared by protein precipitation, and paclitaxel was used as an internal standard (IS). Chromatographic separation was achieved using a Gemini C₁₈ column (2.0 × 150 mm, 5 µm) with a mobile phase consisting of 0.1% formic acid–acetonitrile (30:70, v/v). The precursor–product ion pairs used for multiple reaction monitoring were m/z 808.5 → 527.5 (docetaxel) and m/z 854.2 → 286.5 (IS, paclitaxel). A calibration curve for docetaxel was constructed over the range 1–1000 ng/mL. The developed method was specific, precise and accurate, and no matrix effect was observed. The validated method was applied in a comparative pharmacokinetic study in which two docetaxel formulations, SID530, a new parenteral formulation of docetaxel with hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD), and Taxotere, were administered to rats at a dose of 5 mg/kg. For SID530 and Taxotere, the mean C₀ values were 1494 and 1818 ng/mL, respectively, and the AUC_last values were 837 and 755 h ng/mL, respectively. These two formulations did not show any statistical differences with regard to the pharmacokinetic parameters, thus establishing that the SID530 and Taxotere products are pharmacokinetically comparable in male rats. Copyright © 2012 John Wiley & Sons, Ltd.     

Phytohormone Supplementation Significantly Increases Growth of Chlamydomonas reinhardtii Cultivated for Biodiesel Production

Cultivation is the most expensive step in the production of biodiesel from microalgae, and substantial research has been devoted to developing more cost-effective cultivation methods. Plant hormones (phytohormones) are chemical messengers that regulate various aspects of growth and development and are typically active at very low concentrations. In this study, we investigated the effect of different phytohormones on microalgal growth and biodiesel production in Chlamydomonas reinhardtii and their potential to lower the overall cost of commercial biofuel production. The results indicated that all five of the tested phytohormones (indole-3-acetic acid, gibberellic acid, kinetin, 1-triacontanol, and abscisic acid) promoted microalgal growth. In particular, hormone treatment increased biomass production by 54 to 69 % relative to the control growth medium (Tris–acetate–phosphate, TAP). Phytohormone treatments also affected microalgal cell morphology but had no effect on the yields of fatty acid methyl esters (FAMEs) as a percent of biomass. We also tested the effect of these phytohormones on microalgal growth in nitrogen-limited media by supplementation in the early stationary phase. Maximum cell densities after addition of phytohormones were higher than in TAP medium, even when the nitrogen source was reduced to 40 % of that in TAP medium. Taken together, our results indicate that phytohormones significantly increased microalgal growth, particularly in nitrogen-limited media, and have potential for use in the development of efficient microalgal cultivation for biofuel production.     

A Facile Synthetic Method of 3-Bromoflavones

The synthesis of 3-bromoflavones by bromination-debromination using pyridinium bromide perbromide is described.     

Fabrication of photoluminescent liquid crystal device using an in situ self-assembled molecular layer of a pyrene derivative

An in situ self-assembled molecular layer of 1-pyrenesulfonic acid sodium salt as an alignment agent was formed on indium tin oxide substrates for vertically aligning liquid crystals (LCs). The thus-aligned LCs exhibited uniform vertical alignment under crossed polarisers. The electro-optical characteristic of the LC cell fabricated using this method exhibited better performance than those of conventional LC cells with a polyimide alignment layer. Because the proposed alignment method is a simple one and involves low concentrations of the alignment agent (0.05 wt%), it is highly cost-effective. Further, the pyrene derivative, when mixed with LCs, exhibited photoluminescence (PL) under ultraviolet light. Given that the proposed method resulted in highly vertically aligned LCs and the alignment agent exhibited PL, the method should find wide use in the fabrication of colour-filter-free LC displays.