Kinetics and mechanism of benzylamine additions to ethyl alpha-acetyl-beta-phenylacrylates in acetonitrile

Kinetic studies of the addition of benzylamines to a noncyclic dicarbonyl group activated olefin, ethyl alpha-acetyl-beta-phenylacrylate (EAP), in acetonitrile at 25.0 degrees C are reported. The rates are lower than those for the cyclic dicarbonyl group activated olefins. The addition occurs in a single step with concurrent formation of the Calpha-N and Cbeta-H bonds through a four-center hydrogen bonded transition state.The kinetic isotope effects (kH/kD > 1.0) measured with deuterated benzylamines (XC6H4CH2ND2) increase with a stronger electron acceptor substituent (deltasigmaX > 0) which is the same trend as those found for other dicarbonyl group activated series (1-4), but is in contrast to those for other (noncarbonyl) group activated series (5-9). For the dicarbonyl series, the reactivity-selectivity principle (RSP) holds, but for others the anti-RSP applies. These are interpreted to indicate an insignificant imbalance for the former, but substantial lag in the resonance delocalization in the transition state for the latter series.     

Synthesis and reactivity of hydrazido(2-) and imido derivatives of titanium(IV) tetratolylporphyrin

Titanium porphyrin hydrazido complexes (TTP)Ti = NNR2 (TTP = meso-tetra-p-tolylporphyrinato dianion; R = Me (1), Ph (2)) were synthesized by treatment of (TTP)TiCl2 with 1,1-disubstituted hydrazines H2NNR2 (R = Me, Ph) in the presence of piperdine. The nucleophilic character of the hydrazido moiety was demonstrated in the reactions of complexes 1 and 2 with p-chlorobenzaldehyde, which yielded the titanium oxo complex (TTP)-Ti = O and the respective hydrazones. Protonation of complexes 1 and 2 with phenol or water produced the 1,1-disubstituted hydrazine along with (TTP)Ti(OPh)2 or (TTP)Ti = O, respectively. Similar reactivity of p-chlorobenzaldehyde and phenol with (TTP)Ti = NiPr, 3, was observed. The reaction of complex 3 with nitrosobenzene cleanly formed the azo compound iPrN = NPh and the terminal oxo product (TTP)Ti = O.     

Self-assemblies of new rigid angular ligands and metal centers toward the rational construction and modification of novel coordination polymer networks

Self-assemblies of rigid angular ligands with 120 degrees molecular angle and metal centers have been investigated with the aim of achieving the rational construction and modification of coordination polymer structures. The reactions of Co(NCS)(2) with 1,3-bis(trans-4-styrylpyridyl)benzene (L(1)()), 2,6-bis(trans-4-styrylpyridyl)pyridine (L(2)()), 1,3-bis(trans-4-styrylpyrimidyl)benzene (L(3)()), and 1,3-bis(trans-4-styrylquinoly)benzene (L(4)()) afford complexes [Co(L(1)())(2)(NCS)(2)]( infinity ) (1), [Co(L(2)())(2)(NCS)(2)]( infinity ) (2), Co(L(3)())(2)(NCS)(2)(CH(3)OH)(2) (3), and [Co(L(4)())(NCS)(2)]( infinity ) (4), respectively. The resulting complexes exhibit open framework, stairlike hydrogen-bonded chain and single-stranded helical coil structures, which are controlled by the variation of the geometry around the coordination site in ligands. Moreover, the coordination of L(1)() and L(2)() to Mn(hfac)(2) (hfac = 1,1,1,5,5,5-hexafluoroacetylacetonate) yields single-stranded helical coordination polymers of [Mn(L(1)())(hfac)(2)]( infinity ) (5) and [Mn(L(2)())(hfac)(2)]( infinity ) (6), respectively.     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Effects of aliphatic acids, furfural, and phenolic compounds on Debaryomyces hansenii CCMI 941

Debaryomyces hansenii is a polyol overproducing yeast that can have a potential use for upgrading lignocellulosic hydrolysates. Therefore, the establishment of its tolerance to metabolic inhibitors found in hydrolysates is of major interest. We studied the effects of selected aliphatic acids, phenolic compounds, and furfural. Acetic acid favored biomass production for concentrations <6.0 g/L. Formic acid was more toxic than acetic acid and induced xylitol accumulation (maximum yield of 0.21 g/g of xylose). All tested phenolics strongly decreased the specific growth rate. Increased toxicity was found for hydroquinone, syringaldehyde, and 4-methylcatechol and was correlated to the compound’s hydrophobicity. Increasing the amount of furfural led to longer lag phases and had a detrimental effect on specific growth rate and biomass productivity.     

Protofilaments, filaments, ribbons, and fibrils from peptidomimetic self-assembly: implications for amyloid fibril formation and materials science

Deciphering the mechanism(s) of β-sheet mediated self-assembly is essential for understanding amyloid fibril formation and for the fabrication of polypeptide materials. Herein, we report a simple peptidomimetic that self-assembles into polymorphic β-sheet quaternary structures including protofilaments, filaments, fibrils, and ribbons that are reminiscent of the highly ordered structures displayed by the amyloidogenic peptides Aβ, calcitonin, and amylin. The distribution of quaternary structures can be controlled by and in some cases specified by manipulating the pH, buffer composition, and the ionic strength. The ability to control β-sheet-mediated assembly takes advantage of quaternary structure dependent pK(a) perturbations. Biophysical methods including analytical ultracentrifugation studies as well as far-UV circular dichroism and FT-IR spectroscopy demonstrate that linked secondary and quaternary structural changes mediate peptidomimetic self-assembly. Electron and atomic force microscopy reveal that peptidomimetic assembly involves numerous quaternary structural intermediates that appear to self-assemble in a convergent fashion affording quaternary structures of increasing complexity. The ability to control the assembly pathway(s) and the final quaternary structure(s) afforded should prove to be particularly useful in deciphering the quaternary structural requirements for amyloid fibril formation and for the construction of noncovalent macromolecular structures.     

Analysis of an ancient bronze statue by external beam pixe

A quantitative analysis of an ancient Buddha statue was performed by external beam Proton Induced X-ray Emission for the purpose of identifying its originality. It is shown how the PIXE method can be applied for archeological study. The elemental composition of the statue is compared with that of several samples with definite ages. The experiment was performed by extracting 2.4 MeV proton beam through a 2 mm diameter collimator and 7.6 m kapton foil to the He atmosphere. X-rays were measured by a Si(Li) detector. The analysed elements were Fe, Cu, Ag, Au and Hg for gold coating and Fe, Ni, Cu, Zn, As, Ag, Sn, Au, Pb and Bi for bronze body.     

Ternary upper-critical-solution-temperature behavior in a blend system comprising poly(2,6-dimethyl-1,4-phenylene oxide), poly(4-methyl styrene), and polystyrene

 Upper-critical-solution-temperature (UCST) behavior in a ternary blend of poly(2,6-dimethyl-1,4-phenylene oxide), poly(4-methyl styrene), and polystyrene is reported. The as-cast ternary blend is immiscible at ambient conditions and comprises two different phases, and, however, turns into a miscible system above the “clarity point” ranging from 160 to 300 °C for different ternary compositions. The maximum clarity point is labeled as the UCST for the ternary system, which is about 295 °C. Above the clarity point, the originally immiscible ternary blend turned into one miscible phase. Owing to the thermodynamic UCST behavior and kinetic hindrance, the immiscible ternary polymer blend can be locked into a pseudo-miscible state if it is heated to a temperature above the clarity point followed by a rapid-cooling processing scheme. The quenched ternary blend can remain in a pseudo-miscible state as long as the service temperature does not exceed the glass-transition temperature of the blend. Received: 17 July 2001 Accepted: 3 October 2001     

Three New Lanostane Triterpenoids from Inonotus obliquus

Three new lanostane‐type triterpenoids, inonotsulides A, B, and C ( 1 – 3 , resp.) were isolated from the sclerotia of Inonotus obliquus (Pers .: Fr.) (Japanese name: Kabanoanatake; Russian name: Chaga). Their structures were determined to be (20R,24S)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 1 ), (20R,24R)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 2 ), and (20R,24S)‐3β,25‐dihydroxylanosta‐7,9(11)‐dien‐20,24‐olide ( 3 ) on the basis of chemical transformation, NMR spectroscopy including 1D and 2D (¹H,¹H‐COSY, NOESY, HMQC, HMBC), EI‐MS, and single‐crystal X‐ray analysis.