A serpentine laminating micromixer combining splitting/recombination and advection

Mixing enhancement has drawn great attention from designers of micromixers, since the flow in a microchannel is usually characterized by a low Reynolds number (Re) which makes the mixing quite a difficult task to accomplish. In this paper, a novel integrated efficient micromixer named serpentine laminating micromixer (SLM) has been designed, simulated, fabricated and fully characterized. In the SLM, a high level of efficient mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other terms, lamination) mechanism is obtained by the successive arrangement of "F"-shape mixing units in two layers. The advection is induced by the overall three-dimensional serpentine path of the microchannel. The SLM was realized by SU-8 photolithography, nickel electroplating, injection molding and thermal bonding. Mixing performance of the SLM was fully characterized numerically and experimentally. The numerical mixing simulations show that the advection acts favorably to realize the ideal vertical lamination of fluid flow. The mixing experiments based on an average mixing color intensity change of phenolphthalein show a high level of mixing performance was obtained with the SLM. Numerical and experimental results confirm that efficient mixing is successfully achieved from the SLM over the wide range of Re. Due to the simple and mass producible geometry of the efficient micromixer, SLM proposed in this study, the SLM can be easily applied to integrated microfluidic systems, such as micro-total-analysis-systems or lab-on-a-chip systems.     

Effects of aliphatic acids, furfural, and phenolic compounds on Debaryomyces hansenii CCMI 941

Debaryomyces hansenii is a polyol overproducing yeast that can have a potential use for upgrading lignocellulosic hydrolysates. Therefore, the establishment of its tolerance to metabolic inhibitors found in hydrolysates is of major interest. We studied the effects of selected aliphatic acids, phenolic compounds, and furfural. Acetic acid favored biomass production for concentrations <6.0 g/L. Formic acid was more toxic than acetic acid and induced xylitol accumulation (maximum yield of 0.21 g/g of xylose). All tested phenolics strongly decreased the specific growth rate. Increased toxicity was found for hydroquinone, syringaldehyde, and 4-methylcatechol and was correlated to the compound’s hydrophobicity. Increasing the amount of furfural led to longer lag phases and had a detrimental effect on specific growth rate and biomass productivity.     

Three New Lanostane Triterpenoids from Inonotus obliquus

Three new lanostane‐type triterpenoids, inonotsulides A, B, and C ( 1 – 3 , resp.) were isolated from the sclerotia of Inonotus obliquus (Pers .: Fr.) (Japanese name: Kabanoanatake; Russian name: Chaga). Their structures were determined to be (20R,24S)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 1 ), (20R,24R)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 2 ), and (20R,24S)‐3β,25‐dihydroxylanosta‐7,9(11)‐dien‐20,24‐olide ( 3 ) on the basis of chemical transformation, NMR spectroscopy including 1D and 2D (¹H,¹H‐COSY, NOESY, HMQC, HMBC), EI‐MS, and single‐crystal X‐ray analysis.     

Evaluation of biological monitoring markers using genomic and proteomic analysis for automobile emission inspectors and waste incinerating workers exposed to polycyclic aromatic hydrocarbons or 2,3,7,8,-tetracholrodedibenzo-p-dioxins

In this study, we investigated the effects of PAHs and dioxin on mRNA and plasma protein expression using genomic and proteomic analysis for automobile emission inspectors and waste incineration workers. About 54 workers from automobile emission inspection offices, 31 workers from waste incinerating company and 84 unexposed healthy subjects were enrolled in this study. Urine and air samples were collected and analyzed by HPLC and GC/MS. Comet assays were carried out to evaluate any DNA damage in mononuclear and polynuclear cells. A significant difference in Olive tail moments in mononuclear cells was observed between exposed and control subjects (P < 0.0001). To examine the differences of the gene expression profile in automobile emission inspectors and waste incineration workers, radioactive complementary DNA microarrays were used to evaluate changes in the expression of 1,152 total genes. The gene expression profiles showed that 11 genes were up-regulated and 4 genes were down-regulated in waste incinerating workers as compared with controls. Plasma proteins were analyzed by 2-dimentional electrophoresis with pH 3-10 NL IPG Dry strip. The protein expression profiles showed that 8 proteins were up- regulated and 1 protein, haptoglobin, was down- regulated in automobile emission inspectors and waste incineration workers. Serum paraoxonase/ arylesterase was found only in the plasma of waste incineration workers. The expression of genes and proteins involved in oxidative stress were up-regulated in both automobile emission inspectors and waste incineration workers. Several proteins, such as transthyrethin, sarcolectin and haptoglobin, that were highly up- or down-regulated, could serve as biological monitoring markers for future study.     

Purification of plasmid DNA vectors by aqueous two-phase extraction and hydrophobic interaction chromatography

The current study explores the possibility of using a polyethyleneglycol(PEG)-ammonium sulphate aqueous two-phase system (ATPS) as an early step in a process for the purification of a model 6.1 kbp plasmid DNA (pDNA) vector. Neutralised alkaline lysates were fed directly to ATPS. Conditions were selected to direct pDNA towards the salt-rich bottom phase, so that this stream could be subsequently processed by hydrophobic interaction chromatography (HIC). Screening of the best conditions for ATPS extraction was performed using three PEG molecular weights (300, 400 and 600) and varying the tie-line length, phase volume ratio and lysate load. For a 20% (w/w) lysate load, the best results were obtained with PEG 600 using the shortest tie-line (38.16%, w/w). By further manipulating the system composition along this tie-line in order to obtain a top/bottom phase volume ratio of 9.3 (35%, w/w PEG 600, 6%, w/w NH4)2 SO4), it was possible to recover 100% of pDNA in the bottom phase with a three-fold increase in concentration. Further increase in the lysate load up to 40% (w/w) with this system resulted in a eight-fold increase in pDNA concentration, but with a yield loss of 15%. The ATPS extraction was integrated with HIC and the overall process compared with a previously defined process that uses sequential precipitations with iso-propanol and ammonium sulphate prior to HIC. Although the final yield is lower in the ATPS-based process the purity grade of the final pDNA product is higher. This shows that it is possible to substitute the time-consuming two-step precipitation procedure by a simple ATPS extraction.     

A series of tetrahomodioxacalix[4]biscrown-n. Syntheses, crystal structures, and metal binding abilities

A series of novel tetrahomodioxacalix[4]biscrowns with crown-2, crown-3, crown-4, crown-5, and crown-6 units were synthesized. Conformations of each product are dependent on the base used and their conformation stabilities. All conformations were proven by NMR spectra and/or X-ray crystal structures. The 1,3-alternate homodioxacalix[4]biscrown-4 (4b) shows the best selectivity for K+, whereas the 1,3-alternate homodioxacalix[4]crown-5 (5) does for Cs+. Those selectivities are attributable to electrostatic interaction between the metal ion and the crown ring, as well as a pi-metal complexation. However, the C-1,2-alternate conformation does not take the metal ions regardless of the crown species as a result of steric hindrance from the methylene bridge of an ArCH2Ar unit.     

Preparation of nickel-mesoporous materials and their application to the hydrodechlorination of chlorinated organic compounds

Mesoporous materials have attracted considerable attention for use as a catalyst or a catalyst support due to their remarkable textural properties such as high surface area and large pore volume with a narrow pore size distribution. Many efforts have been made to design mesoporous materials for use in heterogeneous catalyst systems. Recent progress and results regarding the preparation of nickel-mesoporous materials and their application to the hydrodechlorination of chlorinated organic compounds were discussed in this review. Mesoporous materials were used as a support for nickel catalyst or a nickel-incorporated mesoporous catalytic material in this work. Two research areas were described and discussed in this review. One is the preparation of mesoporous alumina-supported nickel catalysts and their application to the hydrodechlorination of 1,2-dichloropropane and o-dichlorobenzene. The other is the preparation of mesoporous silica-supported nickel catalysts and their application to the hydrodechlorination of 1,1,2-trichloroethane and chlorobenzene.     

Ab initio and DFT studies on hydrolyses of phosphorus halides

Hydrolyses of phosphorus halides, (RO)(2)POX where R = H or Me and X = F or Cl, in the gas phase and in the reaction field have been investigated theoretically with ab initio and the density functional theory (DFT). The free energy of activation in the reaction field was also estimated using the Onsager method with a correction of entropy change and basis set superposition error (BSSE). The reaction of (MeO)(2)POF proceeds through a path with bifunctional catalysis regardless of the medium, but the reaction of (MeO)(2)POCl proceeds through bifunctional and general base catalysis in the gas phase and in water, respectively. The estimated free energy barrier of 23 kcal/mol for the hydrolysis of (MeO)(2)POF is in good agreement with the experimental values of 24 kcal/mol, and relative barrier of 3 kcal/mol to the (MeO)(2)POCl is also in good agreement with the experimental values of 5 kcal/mol of diisopropyl phosphorus halides ((Pr(i)O)(2)POX, X = F and Cl).     

Palladium-catalyzed cascade reaction of alpha,beta-unsaturated sulfones with aryl iodides

Unlike traditionally used acyclic 1,2-disubstituted alkenes, the reaction of alpha,beta-unsaturated phenyl sulfones with aryl iodides under Heck reaction conditions (Pd(OAc)(2) as catalyst, Ag(2)CO(3) as base in DMF at 120 (0)C) takes place mainly by a cascade process, involving one unit of the alkene and three units of the aryl iodide, to afford a substituted 9-phenylsulfonyl-9,10-dihydrophenanthrene. The dominant formation of this 3:1 coupling product, instead of the Heck trisubstituted olefin, shows that aromatic C-H bond activation processes can compete with the usually fast syn beta-hydrogen elimination step in the Heck arylation of an acyclic olefin. The structural scope of this palladium-catalyzed cascade arylation of alpha,beta-unsaturated sulfones has proved to be wide with regard to substitution at the beta-position (alkyl, aryl, or alkenyl substitution), substitution at the sulfone unit (alkyl or phenyl sulfones), and configuration at the CdoublebondC bond (trans or cis). Moreover, although less favored than in the case of the arylation of alpha,beta-unsaturated sulfones, similarly substituted 9,10-dihydrophenanthrenes have also been obtained in the case of alpha,beta-unsaturated phosphine oxides and alpha,beta-unsaturated phosphonate esters. A Pd(0)-Pd(II)-Pd(IV) mechanistic pathway involving the successive formation of highly electrophilic sigma-alkylpalladium intermediates and palladacycles is proposed for this multicomponent arylation.