Simple model for frozen-in viscoelastic stress in optical fibers

We have measured residual stress in a commercial single mode optical fiber and observed its relaxation in an annealing process with a polariscopic stress measurement method. After annealing the fiber for an hour at various high temperatures in a specially made image furnace we have measured the temperature dependent relaxation of frozen-in viscoelastic stress in the fiber. We have proposed a simple physical model to explain recently observed relaxation of frozen-in viscoelastic stress in optical fibers based on the Kelvin-Voigt model of viscoelastic materials. The experimental results are explained with our model of frozen-in viscoelastic stress by introducing simplified four-step procedures for fiber drawing.     

Exchange coupled magnetic nanocomposites of Sm(Co1−xFex)5 / Fe3O4 with core/shell structure

Magnetic nanocomposites of Sm(Co_1−xFe_x)₅/Fe₃O₄ (x≈0.1) with the core/shell type structure were successfully fabricated using a two-step polyol process, where as-prepared SmCo_5(1−x) nanoparticles were used as seeds for the ferrite coating. The core/shell composites are quite stable in air and show a typical hysteric behavior of single component, yielding an enhanced coercivity of 2.2 kOe with a saturated magnetization of 130 emu/g at 5 T. The magnetization data clearly reveal the presence of effective exchange coupling between the hard-magnetic Sm(Co_1−xFe_x)₅ core and soft-magnetic Fe₃O₄ shell, suggestive of a single-phase structure rather than a distinctive two-phase one.     

Phase transition characteristics of Ge–Sb–Te pseudobinary alloys in laser irradiation measurement

Optical switching and structural transformation of GeTe–Sb₂Te₃ pseudobinary alloys, Ge₂Sb₂Te₅, Ge₁Sb₂Te₄, and Ge₁Sb₄Te₇, were studied for data storage application. As-deposited Ge₂Sb₂Te₅, Ge₁Sb₂Te₄, and Ge₁Sb₄Te₇ thin films were amorphous and they crystallized to FCC and HCP upon heat treatment. Crystallization was accelerated by increasing the proportion of Sb₂Te₃ rather than GeTe in Ge–Sb–Te compounds; this was observed by reflectivity changes under nanosecond laser irradiation in static tester. The different crystallization kinetics according to composition might be affected by the structural incompatibility of GeTe under the ‘Umbrella Flip’ theory.     

Frequency down-conversion using cascading arrays of coupled nonlinear oscillators

A novel coupling scheme using M≥2 arrays of coupled nonlinear elements arranged in a specific configuration can produce multifrequency patterns or a frequency down-converting effect on an external (input) signal. In such a configuration, each array contains N≥3 nonlinear elements with similar dynamics and each element is coupled unidirectionally within the array. The subsequent arrays in the cascade are coupled in a similar fashion except that the coupling direction is arranged in the opposite direction with respect to that of the preceding array. Previous theoretical work and numerical results have already been reported in [P. Longhini, A. Palacios, V. In, J. Neff, A. Kho, A. Bulsara, Exploiting dynamical symmetry in coupled nonlinear elements for efficient frequency down-conversion, Phys. Rev. E 76 (2007) 026201]. This paper is focused on results of experiments implemented on two distinct systems: the first system is fabricated using discrete component circuits to approximate an overdamped bistable Duffing oscillator described by a quartic potential system, and the second system is built in a microcircuit, where the nonlinearity is described by a hyperbolic tangent function, with the option of applying an external signal to investigate resonant effects. In particular, the circuit implementations for each case use M=2 arrays, but their voltage oscillations already demonstrate that the frequency relations between each of the successive arrays decrease by a rational factor, conforming to earlier theoretical and numerical results for the general case containing M arrays. This behavior is important for efficient frequency down-converting applications which are essential in many communication systems where heterodyning is typically used and it involves multi-step processes with complicated circuitry.     

The SN3–SN2 spectrum. Rate constants and product selectivities for solvolyses of benzenesulfonyl chlorides in aqueous alcohols

Rate constants for a wide range of binary aqueous mixtures and product selectivities (S) in ethanol–water (EW) and methanol–water (MW) mixtures, are reported at 25 °C for solvolyses of benzenesulfonyl chloride and the 4‐chloro‐derivative. S is defined as follows using molar concentrations: S = ([ester product]/[acid product]) × ([water solvent]/[alcohol solvent]). Additional selectivity data are reported for solvolyses of 4‐Z‐substituted sulfonyl chlorides (Z = OMe, Me, H, Cl and NO₂) in 2,2,2‐trifluoroethanol–water. To explain these results and previously published data on kinetic solvent isotope effects (KSIEs) and on other solvolyses of 4‐nitro and 4‐methoxybenzenesulfonyl chloride, a mechanistic spectrum involving a change from third order to second order is proposed. The molecularity of these reactions is discussed, along with new term ‘S_N3–S_N2 spectrum’ and its connection with the better established term ‘S_N2–S_N1 spectrum’. Copyright © 2009 John Wiley & Sons, Ltd.     

漂移管中相对论电子束引导的匹配条件

本文介绍了对连续型相对论电子束的两种引导及箍缩方法:磁场引导和离子通道的静电引导。在线性引导力的假定下,求得了单磁场引导、单静电引导以及同时使用磁场和电场的混合引导的这三种情况下的匹配条件的解析结果。解析公式表明。在混合引导情况下,为了使电子束匹配,当电子束的中和因子线性增加时,相应的引导磁场不是线性地减小。而是抛物线形地减小。本文还使用了模拟束片内电子横向运动的LGERKB编码,通过对N_0个束内电子的模拟计算,求得了电子束包络。电子束的均方根发射度、典型电子轨道、失配和匹配情况下的束内电子相空间分布(相图)及其演变过程等大量资料。线性模拟结果与解析分析结果完全一致。     

Ab initio prediction of pressure-induced structural phase transition of superconducting FeSe

External pressure driven phase transitions of FeSe are predicted using ab initio calculations. The calculations reveal that α-FeSe makes transitions to NiAs-type, MnP-type, and CsCl-type FeSe. Transitions from NiAs-type to MnP-type and CsCl-type FeSe are also predicted. MnP-type FeSe is also found to be able to transform to CsCl-type FeSe, which is easier from α-FeSe than the transition to MnP-type FeSe, but comparable to the transition from NiAs-type FeSe. The calculated electronic structures show that all phases of FeSe are metallic, but the ionic interaction between Fe-Se bonds becomes stronger and the covalent interaction becomes weaker when the structural phase transition occurs from α-FeSe to the other phases of FeSe. The experimentally observed decrease in T(c) of superconducting α-FeSe at high pressure may be due to a structural/magnetic instability, which exists at high pressure. The results suggest an increase of the T(c) of α-FeSe if such phase transitions are frustrated by suitable methods.     

Advantages of Adaptive Speckle Filtering Prior to Application of Iterative Deconvolution Methods for Optical Coherent Tomography Imaging

The axial resolution of optical coherence tomography (OCT) is closely related to the light source spectrum width. Unfortunately, most basic sources providing the required power for decent OCT image have narrow spectra, which generate a resolution loss. Assuming the OCT system is linear shift-invariant, we can consider the system output as the convolution of the theoretical signal with a system impulse response due to this spectrum narrowness. It becomes then possible to enhance this resolution through iterative deconvolution methods (IDM). However those methods have a significant drawback, as they usually significantly enhance speckle, which is another consequence of the source spectrum narrowness. To compensate this, we rely on preliminary speckle filtering, and especially the adaptative ones, which allow tackling the speckle without blurring the image. We first studied enhancement proposed by most popular IDMs on OCT images, and then the effect of preliminary adaptive speckle filtering (ASF) by different common adaptive methods. Then, among those methods, we combined Frost filter and Richardson-Lucy deconvolution in the appropriated way; this way we both enhanced resolution by 2 and reduced speckle (raising CNR from 0.7 to 1.3)     

The use of vibrational spectroscopy to study the pathogenesis multiple sclerosis and other neurological conditions

Spectroscopy techniques are valuable tools in biomedical research and have been used extensively in the study of disease. However, neurological conditions such as multiple sclerosis (MS) have received little attention and the available spectroscopy studies are limited, both in overall numbers of patients studied and the disease samples considered. MS is a complex immune-mediated disease, with variable clinical courses and limited therapeutic options. This review aims to summarize current literature in the area, demonstrating how spectroscopy techniques can provide valuable information to inform and advance research into the most common neurological condition affecting young adults.     

Investigation on the Beckmann rearrangement reaction catalyzed by porous solids: MAS NMR and theoretical calculations

In the last years, ‘in situ’ solid-state NMR has been applied to investigate the Beckmann rearrangement of oximes into amides using zeolites and mesoporous materials of different structure containing Brønsted acids or silanol groups as active sites. DFT methods have been applied to model the geometry of the complexes resulting from adsorption of reactants, reaction intermediates and products on clusters representing the zeolite centers, and their ¹⁵N and ¹³C NMR chemical shift calculated theoretically. This article reviews the results reported in the bibliography on the Beckmann rearrangement of various oximes (acetophenone oxime, cyclohexanone oxime and cyclododecanone oxime) mainly using ‘in situ’ ¹⁵N NMR spectroscopy and theoretical calculations, and are compared with those obtained by ‘in situ’ infrared spectroscopy. The combination of experiment and theory has been shown to be very useful for the interpretation of the NMR spectra and the identification of the species present at different reaction temperatures.