Titanium micromachining by femtosecond laser

The ultimate goal of this research was to characterize the ablation depth with respect to pulse energy, translation speed, and consecutive passes in order to obtain the parameters to have smooth microchannel surfaces. A logarithmic dependence of the channel depth on the laser pulse energy was observed with two different distinct ablation regimes. Although the same fluence values were used with two different lens sizes, the slopes of these ablation regimes were quite different. 100 mm lens has a small optical penetration length with steeper ablation slope in the first regime, whereas the 15 mm lens has the opposite. In the second part of the ablation regime, the slope was lower for 100 mm lens as compared to 15 mm lens. Furthermore, spike formation has been seen in 100 mm lens study at 0.308, 0.370, 0.431, and 0.493 J/cm² fluence values yet no spike formations have been seen in 15 mm lens study.     

Enantiomeric resolution of ibuprofen and flurbiprofen in human plasma by SPE-chiral HPLC methods

Chiral analysis of profens in human plasma is an important area of research due to different pharmaceutical activities of their enantiomers. The solid phase extraction of ibuprofen and flurbiprofen from human plasma was carried out on C18 cartridges by using phosphate buffer (50 mM, pH 6.0) followed by elution with methanol. Chiral-HPLC was performed on AmyCoat RP (150 mm x 46 mm, 3 μm particle size) column by using different combinations of water-acetonitrile-trifluoro acetic acid at 1.5 mLmin-1 flow rate. The detection was achieved at 236 and 254 nm for ibuprofen and flurbiprofen, respectively with 27±1°C as working temperature. The chromatographic parameters i.e. retention (k), separation (α) and resolution (Rs) factors ranged from 4.54-14.42, 1.10-1.30 and 1.01-1.49, respectively. The binding differences of enantiomers of ibuprofen and flurbiprofen were 4.4 and 5.2, respectively. These values suggest that S-(+)- enantiomer of flurbiprofen is more active than ibuprofen due to low enantiomeric difference of the later drug. The developed SPE-Chiral HPLC methods were validated, which are selective, efficient and reproducible.     

Recent trends in chiral separations on immobilized polysaccharides CSPs

Polysaccharide CSPs are recognized widely in chiral chromatography but the introduction of immobilized phases (Chiralpak IA, Chiralpak IB and Chiralpak IC columns) is a remarkable achievement. The immobilized CSPs can be used with organic, normal and reversed phase modes; even with prohibited solvents too (tetrahydrofuran, chlorofom, dichloromethane, acetone, 1,4-dioxane, ethylacetate, and certain other ethers). Their susceptibilities to work with a wide range of solvents have increased the range of applications including chiral recognition mechanisms. Besides, these are also useful for monitoring the progress of stereo-specific reactions; normally need prohibited solvents. The present review describes the various aspects of commercial available immobilized chiral columns. Attempts have been made to discuss immobilized polysaccharides CSPs, immobilized vs coated CSPs, comparison of immobilized CSPs, method development, optimization, chiral recognition mechanism and applications. The chiral recognition capabilities of commercial columns were in the order of Chiralpak IA > Chiralpak IB > Chiralpak IC columns; but complimentary to each other. Of course, these CSPs are not fully developed and need more advancements and applications. Definitely, the future of immobilized CSPs is quite better. Hopefully, in the coming years they will be the choice of the chromatographers for chiral separations in liquid chromatography.     

Resolvability in circulant graphs

A set W of the vertices of a connected graph G is called a resolving set for G if for every two distinct vertices u, v ∈ V (G) there is a vertex w ∈ W such that d(u, w) ≠ d(v, w). A resolving set of minimum cardinality is called a metric basis for G and the number of vertices in a metric basis is called the metric dimension of G, denoted by dim(G). For a vertex u of G and a subset S of V (G), the distance between u and S is the number min s∈S d(u, s). A k-partition Π = {S 1 , S 2 , . . . , S k } of V (G) is called a resolving partition if for every two distinct vertices u, v ∈ V (G) there is a set S i in Π such that d(u, Si )≠ d(v, Si ). The minimum k for which there is a resolving k-partition of V (G) is called the partition dimension of G, denoted by pd(G). The circulant graph is a graph with vertex set Zn , an additive group of integers modulo n, and two vertices labeled i and j adjacent if and only if i-j (mod n) ∈ C , where CZn has the property that C =-C and 0 ■ C. The circulant graph is denoted by Xn, Δ where Δ = |C|. In this paper, we study the metric dimension of a family of circulant graphs Xn, 3 with connection set C = {1, n/2 , n-1} and prove that dim(Xn, 3 ) is independent of choice of n by showing that dim(Xn, 3 ) ={3 for all n ≡ 0 (mod 4), 4 for all n ≡ 2 (mod 4). We also study the partition dimension of a family of circulant graphs Xn,4 with connection set C = {±1, ±2} and prove that pd(Xn, 4 ) is independent of choice of n and show that pd(X5,4 ) = 5 and pd(Xn,4 ) ={3 for all odd n ≥ 9, 4 for all even n ≥ 6 and n = 7.     

Dynamic characteristics of nanoindentation in Ni:A molecular dynamics simulation study

In this work,three-dimensional molecular dynamics simulation is carried out to elucidate the nanoindentation behaviour of single crystal Ni.The substrate indenter system is modelled using hybrid interatomic potentials including the manybody potential(embedded atom method) and two-body Morse potential.The spherical indenter is chosen,and the simulation is performed for different loading rates from 10 m/s to 200 m/s.Results show that the maximum indentation load and hardness of the system increase with the increase of velocity.The effect of indenter size on the nanoindentation response is also analysed.It is found that the maximum indentation load is higher for the large indenter whereas the hardness is higher for the smaller indenter.Dynamic nanoindentation is carried out to investigate the behaviour of Ni substrate to multiple loading-unloading cycles.It is observed from the results that the increase in the number of loading unloading cycles reduces the maximum load and hardness of the Ni substrate.This is attributed to the decrease in recovery force due to defects and dislocations produced after each indentation cycle.     

Nigella sativa L. and COVID-19: A Glance at The Anti-COVID-19 Chemical Constituents,Clinical Trials,Inventions, and Patent Literature

COVID-19 has had an impact on human quality of life and economics. Scientists have been identifying remedies for its prevention and treatment from all possible sources, including plants. Nigella sativa L. (NS) is an important medicinal plant of Islamic value. This review highlights the anti-COVID-19 potential, clinical trials, inventions, and patent literature related to NS and its major chemical constituents, like thymoquinone. The literature was collected from different databases, including Pubmed, Espacenet, and Patentscope. The literature supports the efficacy of NS, NS oil (NSO), and its chemical constituents against COVID-19. The clinical data imply that NS and NSO can prevent and treat COVID-19 patients with a faster recovery rate. Several inventions comprising NS and NSO have been claimed in patent applications to prevent/treat COVID-19. The patent literature cites NS as an immunomodulator, antioxidant, anti-inflammatory, a source of anti-SARS-CoV-2 compounds, and a plant having protective effects on the lungs. The available facts indicate that NS, NSO, and its various compositions have all the attributes to be used as a promising remedy to prevent, manage, and treat COVID-19 among high-risk people as well as for the therapy of COVID-19 patients of all age groups as a monotherapy or a combination therapy. Many compositions of NS in combination with countless medicinal herbs and medicines are still unexplored. Accordingly, the authors foresee a bright scope in developing NS-based anti-COVID-19 composition for clinical use in the future.     

Antioxidant Activity Evaluation of FlexirubinType Pigment from Chryseobacterium artocarpi CECT 8497 and Related Docking Study

The current research is focused on studying the biological efficacy of flexirubin, a pigment extracted from Chryseobacterium artocarpi CECT 8497.Different methods such as DPPH, H₂O_2, NO^•, O₂^•−, ^•OH, lipid peroxidation inhibition by FTC and TBA, ferric reducing and ferrous chelating activity were carried out to evaluate the antioxidant activity of flexirubin. Molecular docking was also carried out, seeking the molecular interactions of flexirubin and a standard antioxidant compound with SOD enzyme to figure out the possible flexirubin activity mechanism. The new findings revealed that the highest level of flexirubin exhibited similar antioxidant activity as that of the standard compound according to the H₂O₂, ^•OH, O₂^•−, FTC and TBA methods. On the other hand, flexirubin at the highest level has shown lower antioxidant activity than the positive control according to the DPPH and NO• and even much lower when measured by the FRAP method. Molecular docking showed that the interaction of flexirubin was in the binding cavity of the SOD enzyme and did not affect its metal-binding site. These results revealed that flexirubin has antioxidant properties and can be a useful therapeutic compound in preventing or treating free radical-related diseases.     

A tandem ionic liquid-based dispersive microextraction method using in-syringe air-assisted vesicle system for rapid determination of lead and cadmium in artificial sweat extract of facial cosmetic products

In the present study an innovative tandem ionic liquid-based dispersive microextraction method using an in-syringe air-assisted vesicle system was developed to determine the ultra-trace levels of lead (Pb^II) and cadmium (Cd^II) ions in synthetic sweat extract of branded and nonbranded facial cosmetic products. This method is based on injecting 2-amino-3-sulfhydrylpropanoic acid (l -cysteine) (as an eco-friendly chelating agent), hexafluorophosphate ion [PF₆⁻] (as an ion pair agent) and 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM] [PF₆] (as an acceptor phase) into the synthetic sweat extract of facial cosmetic products (branded and nonbranded). The acceleration of the dispersion process was carried out by rapid pressure in the syringe through the back-and-forth movement of plunger. The sediment phase was removed following centrifugation, and then hydrophobic complexes of analyte were back-extracted into HNO₃ and finally injected into a flame atomic absorption spectrometer. Several factors were systematically optimized. The validity of the methodology was tested by analyzing spiked known standards of both metals in a real sample. The proposed method was applied to the artificial sweat extracts of face makeup products, indicating how much toxic metals from different cosmetics are directly absorbed into skin.