Tip cleaning and sharpening processes for noncontact atomic force microscope in ultrahigh vacuum

Tip cleaning and sharpening processes for noncontact atomic force microscope (AFM) operated in ultrahigh vacuum (UHV) were carried out and evaluated by a scanning Auger microscope (SAM) with a field emission electron gun and a noncontact AFM in UHV combined with a scanning tunneling microscope and a field emission microscope. The cantilever used in this study was piezoresistive, which can be heated by passing a current through the resistive legs of the cantilever. As a pretreatment, the tip was irradiated with ultraviolet light in oxygen to remove carbon contaminants. It was heated at about 750°C to form a clean oxide layer in oxygen of 5×10⁻⁵ Torr in an SAM chamber. The desorption of the layer can make a remained tip apex sharper by heating under electron beam irradiation. A thermally oxidized layer was also eliminated by HF etching to sharpen the tip apex. The procedures are useful to obtain a well-defined Si tip suitable for a noncontact AFM.     

Small-Angle Scattering and Electron Microscopy Investigation of Nanotubules Made from a Perfluoroalkylated Glucophospholipid

Anionic glucophospholipids were recently reported as a new family of tubule-forming lipids. We report here investigations on the structure of nanotubules made from a glucophospholipid with a mixed fluorocarbon-hydrocarbon hydrophobe, using freeze fracture and cryo-transmission electron microscopy (TEM) and X-ray and neutron small angle scattering (SAXS, SANS). The hollow and regularly shaped tubules are very thin: they have an external radius of 140 ? and an internal radius of 35 ? on the average. Their 105 ?-thick wall appears to consist in three bilayers in which the glucophospholipid molecules are probably in a tilted and/or interdigitated configuration. Upon heating these nanotubes convert reversibly into vesicles; transformation is complete at 60 degrees C. Copyright 1999 Academic Press.     

Estimation of heterogeneous surface structure of submicron-sized,composite polymer particles consisting of hydrophobic and hydrophilic components by atomic force microscopy*

Surface structure of submicron-sized poly(styrene/2-hydroxyethyl methacrylate) [P(S/HEMA)] composite particles produced by emulsifier-free emulsion polymerization was estimated with atomic force microscopy (AFM). AFM force curves were measured in water at different points of the particle surface; it was clarified that the particle surface had a heterogeneous structure consisting of hard and soft parts, which must be, respectively, based on styrene-rich and 2-hydroxyethyl methacrylate-rich parts.     

Resolution of non-protein amino acids via the microbial protease-catalyzed enantioselective hydrolysis of their N-unprotected esters

In the Aspergillus oryzae protease-catalyzed ester hydrolysis, substitution of N-unprotected amino acid esters for the corresponding N-protected amino acid esters resulted in a large enhancement of the hydrolysis rate, while the enantioselectivity was deteriorated strikingly when the substrates employed were the conventional methyl esters. This difficulty was overcome by employing esters bearing a longer alkyl chain such as the isobutyl ester. Utilizing this ester, amino acids carrying an aromatic side chain were resolved with excellent enantioselectivities (E=50 to >200). With amino acids bearing an aliphatic side chain also, good results in terms of the hydrolysis rate and enantioselectivity were obtained by employing such an ester as the isobutyl ester. Moreover, the enantioselectivity proved to be enhanced further by conducting the reaction at low temperature. This procedure was applicable to the case where the enantioselectivity was not high enough even by the use of the isobutyl ester.     

Investigation of organic thermoelectric materials using potential-step chronocoulometry: Effect of polymerization methods on thermoelectric properties of poly(3-hexylthiophene)

To establish the correlation between the thermoelectric properties of conducting polymers and their doping levels, we have utilized the potential-step chronocoulometry for the quantitative estimation of the doping levels. In this paper, three types of poly(3-hexylthiophene)s synthesized by different polymerization methods were investigated. The electrical conductivities and the Seebeck coefficients of poly(3-hexylthiophene)s with various doping levels were measured and plotted against the doping level. It was found that the electrical conductivity linearly increased with increasing the doping level in the range of 1–10%, and then saturated. On the other hand, the relationship between the Seebeck coefficient and the doping level showed a good linearity in all the polymers.     

Photovoltaic performance of dye-sensitized solar cells based on donor-acceptor pi-conjugated benzofuro[2,3-c]oxazolo[4,5-a]carbazole-type fluorescent dyes with a carboxyl group at different positions of the chromophore skeleton

Donor-acceptor pi-conjugated benzofuro[2,3-c]oxazolo[4,5-a]carbazole-type fluorescent dyes 3a, 3b, 8a, and 8b with a carboxyl group at different positions of the chromophore skeleton have been designed and synthesized. The absorption and fluorescence spectra and cyclic voltammograms of the fluorescent dyes agree very well, showing that the position of the carboxyl group has a negligible influence on the photophysical and electrochemical properties of these dyes. When these dyes are used in dye-sensitized solar cells, however, their photovolatic performances are considerably different. The short-circuit photocurrents and energy conversion efficiencies under a simulated solar light increase in the order: 3a (2.12 mA cm(-2), 1.00%) approximately 3b (2.10 mA cm(-2), 1.06%) > 8b (1.50 mA cm(-2), 0.67%) > 8a (0.84 mA cm(-2), 0.34%). Based on semi-empirical molecular orbital calculations (AM1 and INDO/S) together with spectral analyses and their photovolatic performance, the relationships between the observed photovolatic properties and the chemical structures of the benzofuro[2,3-c]oxazolo[4,5-a]carbazole-type fluorescent dyes are discussed. It is found that strong interaction between a TiO(2) surface and the electron accepting moiety of the dye leads to a high photovoltaic performance.     

Effects of stirring prior to starting emulsion polymerization of styrene with nonionic emulsifier on particle formation and its incorporation

Emulsion polymerization of styrene with a nonionic emulsifier (polyoxyethylene nonylphenyl ether, E911) and potassium persulfate as initiator was carried out at different stirring rates (240–500 rpm) at 70 °C, which was started by the addition of initiator after stirring for 100 min at 70 °C. Resulting polystyrene (PS) particles at 240 rpm were 70-nm-sized, spherical particles and incorporated only 5 wt.% of total E911. On the other hand, particles at 500 rpm were 1-μm-sized, nonspherical particles, which were formed by coagulation of small particles, and incorporated above 70 wt.% of E911 in the inside. Before starting emulsion polymerization, E911 and styrene, respectively, transferred from an aqueous phase to a styrene phase and from the styrene phase to the aqueous phase (water and micelles) faster at 500 rpm than 240 rpm. At 240 rpm, there were a lot of almost empty micelles (ca. 5 nm) in the aqueous phase, on the other hand at 500 rpm, 70 wt.% of total E911 transferred to the styrene phase and the micelles were swollen with much monomer (ca. 40 nm) even if the number was smaller. Stirring prior to starting the emulsion polymerization greatly affected partitionings of monomer to the aqueous phase and the nonionic emulsifier to the styrene phase, resulting in the differences in the particle formation and the incorporation of the nonionic emulsifier inside PS particles.     

Biosynthetic Mechanisms and Biological Significance of Glycerol Phosphate-Containing Glycan in Mammals

Bacteria contain glycerol phosphate (GroP)-containing glycans, which are important constituents of cell-surface glycopolymers such as the teichoic acids of Gram-positive bacterial cell walls. These glycopolymers comprising GroP play crucial roles in bacterial physiology and virulence. Recently, the first identification of a GroP-containing glycan in mammals was reported as a variant form of O-mannosyl glycan on α-dystroglycan (α-DG). However, the biological significance of such GroP modification remains largely unknown. In this review, we provide an overview of this new discovery of GroP-containing glycan in mammals and then outline the recent progress in elucidating the biosynthetic mechanisms of GroP-containing glycans on α-DG. In addition, we discuss the potential biological role of GroP modification along with the challenges and prospects for further research. The progress in this newly identified glycan modification will provide insights into the phylogenetic implications of glycan.     

Stability and Size Control of Reverse Vesicles

The stability and size control of reverse vesicles have been investigated for a sucrose monoalkanoate/hexaethylene glycol hexadecyl ether/decane/water system. The stability is highly dependent on the surfactant mixing ratio, amount of added water, and vesicle size. The size distribution of reverse vesicles produced by simple mixing is very large, but larger vesicles can be removed by means of the extrusion method and reasonably homogeneously size-distributed reverse vesicles can be obtained. If a probe-type ultrasonicator is used, the reverse vesicles obtained are homogeneous and of very small size (50-70 nm in diameter) and they are considered to be of the unilamellar type.