Theoretical Study on Properties of New Isotope 265Bh

The properties of nuclei belonging to the newly observed α-decay chain starting from 265Bh have been studied. The axially deformed relativistic mean-field calculation with the force NL-Z2 has been performed in the blockedBCS approximation. Some ground state properties such as binding energies, deformations, spins, and parities, as well as Q-values of the α-decay for this decay chain have been calculated and compared with known experimental data. Good agreement is found. The single-particle spectrum of the nucleus 265 Bh is studied and some new magic numbers are found,while the magnitudes of the shell gaps in superheavy nuclei are much smaller than those of nuclei before the actinium region, and the Fermi surfaces are close to the continuum. Thus the superheavy nuclei are usually not stable. The The methods which give good agreement with the data are selected.     

Titania-Doped Silica Fibers Prepared by Electrospinning and Sol-Gel Process

Titania-doped silica fibers were prepared by electrospinning of the sol of silica containing titania. The electrospun fibers had ribbon type morphology. The fibers had significant quantities of hydroxyl groups of Si—OH and Ti—OH. The fibers did not have crystalline structure. Diameters of the fibers were reduced by solvent evaporation and calcination. The hydroxyl groups on the fibers disappeared by calcination. The hydroxyl groups, M—OH (MSi, Ti) were changed to M—O—M by intermolecular and intramolecular condensation reactions.     

Characteristics of polypropylene biocomposites: effect of chemical treatment to produce cellulose microparticle

Cellulose - In this study, cellulose microparticle were prepared by sulfuric acid hydrolysis, glyoxal crosslinking and acetylation followed by air classifying mill, and their properties including...     

The influence of boundary layers on supersonic inlet flow unstart induced by mass injection

A transverse jet is injected into a supersonic model inlet flow to induce unstart. Planar laser Rayleigh scattering from condensed CO₂ particles is used to visualize flow dynamics during the unstart process, while in some cases, wall pressure traces are simultaneously recorded. Studies conducted over a range of inlet configurations reveal that the presence of turbulent wall boundary layers strongly affect the unstart dynamics. It is found that relatively thick turbulent boundary layers in asymmetric wall boundary layer conditions prompt the formation of unstart shocks; in symmetric boundary conditions lead to the propagation of pseudo-shocks; and in both cases facilitate fast inlet unstart, when compared with thin, laminar boundary layers. Incident shockwaves and associated reflections are found to affect the speed of pressure disturbances. These disturbances, which induce boundary layer separation, are found to precede the formation of unstart shocks. The results confirm the importance of and need to better understand shock-boundary layer interactions in inlet unstart dynamics.     

Solvent‐dependent formation of inclusion complexes between methylated cyclodextrins and biodegradable polymers

The inclusion complexes (ICs) of unmodified natural and methylated α‐cyclodextrins (CDs) with biodegradable polymers, polyethylene glycol and poly(ε‐caprolactone), were prepared by two methods, that is, the one using water and the other using chloroform as the solvent for the respective CDs. The ICs obtained were characterized by IR, WAXD, DSC, and ¹³C CP/MAS NMR. It was found that the possibility and the phenomena of IC formation could be varied with the degree of methyl substitution of CD as well as the type of solvents used. Methylated α‐CDs showed the prominent characteristics of IC formation with polymers in the case where chloroform was used than in the case where water was used as the solvent for CDs, while vice versa in the case of native α‐CD. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 879–891, 2008     

Morphological changes during heating in poly(L‐lactic acid)/poly(butylene succinate) blend systems as studied by synchrotron X‐ray scattering

Blends of poly(L ‐lactic acid) (PLA) and poly(butylene succinate) (PBS) were prepared in various compositions via melt mixing, and the morphological changes were investigated with differential scanning calorimetry and synchrotron wide‐angle and small‐angle X‐ray scattering techniques at a heating rate of 10 °C/min. Differential scanning calorimetry thermograms of PLA/PBS blends showed two distinct melting peaks over the entire composition range. The exothermal peak for PLA shifted significantly to a lower temperature and overlapped with that of PBS around 100 °C. A depression of the melting point of the PLA component via blending was observed. The synchrotron wide‐angle X‐ray scattering during heating revealed that there was no cocrystallization or crystal modification via blending. The synchrotron small‐angle X‐ray scattering data showed that well‐defined double‐scattering peaks (or peaks with a clear scattering shoulder) appeared during crystallization, indicating that this system possessed dual lamellar stacks. These peaks were deconvoluted into two components with a peak separation computer program, and then the morphological parameters of each component were obtained by means of the correlation function. The long period and average lamellar thickness of the two components before melting decreased with an increasing content of the other polymer component. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1931–1939, 2002     

Glycan Reader: automated sugar identification and simulation preparation for carbohydrates and glycoproteins

Understanding how glycosylation affects protein structure, dynamics, and function is an emerging and challenging problem in biology. As a first step toward glycan modeling in the context of structural glycobiology, we have developed Glycan Reader and integrated it into the CHARMM-GUI, http://www.charmm-gui.org/input/glycan. Glycan Reader greatly simplifies the reading of PDB structure files containing glycans through (i) detection of carbohydrate molecules, (ii) automatic annotation of carbohydrates based on their three-dimensional structures, (iii) recognition of glycosidic linkages between carbohydrates as well as N-/O-glycosidic linkages to proteins, and (iv) generation of inputs for the biomolecular simulation program CHARMM with the proper glycosidic linkage setup. In addition, Glycan Reader is linked to other functional modules in CHARMM-GUI, allowing users to easily generate carbohydrate or glycoprotein molecular simulation systems in solution or membrane environments and visualize the electrostatic potential on glycoprotein surfaces. These tools are useful for studying the impact of glycosylation on protein structure and dynamics.     

Cathepsin L derived from skeletal muscle cells transfected with bFGF promotes endothelial cell migration

Gene transfer of basic fibroblast growth factor (bFGF) has been shown to induce significant endothelial migration and angiogenesis in ischemic disease models. Here, we investigate what factors are secreted from skeletal muscle cells (SkMCs) transfected with bFGF gene and whether they participate in endothelial cell migration. We constructed replication-defective adenovirus vectors containing the human bFGF gene (Ad/bFGF) or a control LacZ gene (Ad/LacZ) and obtained conditioned media, bFGF-CM and LacZ-CM, from SkMCs infected by Ad/bFGF or Ad/LacZ, respectively. Cell migration significantly increased in HUVECs incubated with bFGF-CM compared to cells incubated with LacZ-CM. Interestingly, HUVEC migration in response to bFGF-CM was only partially blocked by the addition of bFGF-neutralizing antibody, suggesting that bFGF-CM contains other factors that stimulate endothelial cell migration. Several proteins, matrix metalloproteinase-1 (MMP-1), plasminogen activator inhibitor-1 (PAI-1), and cathepsin L, increased in bFGF-CM compared to LacZ-CM; based on 1-dimensional gel electrophoresis and mass spectrometry. Their increased mRNA and protein levels were confirmed by RT-PCR and immunoblot analysis. The recombinant human bFGF protein induced MMP-1, PAI-1, and cathepsin L expression in SkMCs. Endothelial cell migration was reduced in groups treated with bFGF-CM containing neutralizing antibodies against MMP-1 or PAI-1. In particular, HUVECs treated with bFGF-CM containing cell-impermeable cathepsin L inhibitor showed the most significant decrease in cell migration. Cathepsin L protein directly promotes endothelial cell migration through the JNK pathway. These results indicate that cathepsin L released from SkMCs transfected with the bFGF gene can promote endothelial cell migration.     

Tone Image Classification and Weighted Learning for Visible and NIR Image Fusion

In this paper, to improve the slow processing speed of the rule-based visible and NIR (near-infrared) image synthesis method, we present a fast image fusion method using DenseFuse, one of the CNN (convolutional neural network)-based image synthesis methods. The proposed method applies a raster scan algorithm to secure visible and NIR datasets for effective learning and presents a dataset classification method using luminance and variance. Additionally, in this paper, a method for synthesizing a feature map in a fusion layer is presented and compared with the method for synthesizing a feature map in other fusion layers. The proposed method learns the superior image quality of the rule-based image synthesis method and shows a clear synthesized image with better visibility than other existing learning-based image synthesis methods. Compared with the rule-based image synthesis method used as the target image, the proposed method has an advantage in processing speed by reducing the processing time to three times or more.     

Convergent total synthesis of the racemic HIF-1 inhibitor laurenditerpenol

The convergent total synthesis of the HIF-1 inhibitor laurenditerpenol 1a is reported. The key step is the Julia olefination-reduction process between the two components, the sulfone 4 (prepared from the dimethylfuran-maleic anhydride Diels-Alder adduct) and the aldehyde 3 (prepared from 3-methylcyclohexenone).