Design and development of an optical beam splitter assembly and high precision colinearity measurements of laser beams

Laser beams with extremely high colinearity are often required where precision position monitoring is important. In order to achieve the said objective, a special type of Laser Beam Splitter Assembly (BSA) has been designed and fabricated in a very small volume due to space constraints. The main features and details of such a system are described here. This type of beam splitter assembly coupled with a diode laser through fibers can be remotely used for alignment or position monitoring of different medium to large size structures with a reconstruction accuracy of 10 μm. In this way, BSA generates two counter propagating laser beams from a single diode laser coupled to an optical fiber. In the present work, the colinearity between two beams within 1 mrad with the variation of 50 μrad has been achieved. The laser's power in the two arms may be controlled precisely, which is an important feature of this BSA. The BSA has been tested to work over a temperature range between ?20 °C to +40 °C. It has also been exposed to 1.0 MeV neutrons at a flux of ～5.0×10¹⁰ n/cm²/s and found compatible.     

Dietary Chlorophyll Metabolites Catalyze the Photoreduction of Plasma Ubiquinone

Ubiquinol is a plasma antioxidant. The mechanisms responsible for maintenance of plasma ubiquinol are poorly understood. Here, we show that metabolites of chlorophyll can be found in blood plasma of animals that are given a chlorophyll‐rich diet. We also show that these metabolites catalyze the reduction of plasma ubiquinone to ubiquinol in the presence of ambient light, in vitro. We propose that dietary chlorophyll or its metabolites, together with light exposure, regulate plasma redox status through maintaining the ubiquinol pool.     

On the response of MEMS resonators under generic electrostatic loadings: experiments and applications

Nonlinear Dynamics - We present an investigation of the dynamic behavior of an electrostatically actuated clamped–clamped microbeam, under the simultaneous excitation of primary and...     

Reduced hamiltonian orbitals. II. Optimal orbital basis sets for the many-electron problem

Optimal orbital exponents are approximated by minimization of the reduced Hamiltonian orbital ground state energy. They appear to be as good as and are obtained at much less expense than the values derived by the usual SCF exponent optimization scheme. Partitioning of energy into 0-energy, 1-energy, and 2-energy (Absar and Coleman, Int. J. Quant. Chem. 10 , 319 (1976); Chem. Phys. Lett. 39 , 60 (1976)) is used to study the variation in the electronic energy surface upon variation of orbital exponents. The 1-energy operator, the natural orbitals of which are the reduced Hamiltonian orbitals, is compared with the SCF operator.     

Kinetics of Lab Prepared Manganese Oxide Catalyzed Oxidation of Benzyl Alcohol in the Liquid Phase

The oxidation of benzyl alcohol in the liquid phase was studied over manganese oxide catalyst using molecular oxygen as an oxidant. Manganese oxide was prepared by a mechanochemical process in solid state and was characterized by chemical and physical techniques. The catalytic performance of manganese oxide was explored by carrying out the oxidation of benzyl alcohol at 323–373 K temperature and 34–101 kPa partial pressure of oxygen. Benzaldehyde and benzoic acid were identified as the reaction products. Typical batch reactor kinetic data were obtained and fitted to the Langmuir–Hinshelwood, Eley–Rideal, and Mars–van Krevelene models of heterogeneously catalyzed reactions. The Langmuir–Hinshelwood model was found to give a better fit. Adsorption of benzyl alcohol at the surface of the catalyst followed the Langmuir adsorption isotherm. The heat of adsorption for benzyl alcohol was determined as –18.14 kJ mol^?1. The adsorption of oxygen followed the Temkin adsorption isotherm. The maximum heat of adsorption for oxygen was –31.12 kJ mol^?1. The value of activation energy was 71.18 kJ mol^?1, which was apparently free from the influence of the heat of adsorption of both benzyl alcohol and oxygen.     

Temperature and solvent control of the stereoselectivity in the reactions of singlet oxygen with oxazolidinone-substituted enecarbamates

Oxazolidinone-functionalized enecarbamates react stereoselectively with singlet oxygen to give methyldesoxybenzoin (MDB) in moderate to high enantiomeric excess. The stereochemical outcome depends on the E/Z substrate geometry, temperature, and solvent variables. The analysis of the differential activation parameters suggests a large contribution from the entropy term in determining the enantioselectivity. We demonstrate the utility of the temperature and solvent variables in determining the degree of the photochemical kinetic resolution of the enecarbamates; for example, in the photooxygenation at -70 degrees C in methanol, MDB may be obtained in methanol.     

Interfacial Behavior of Cysteine between Mild Steel and Sulfuric Acid as Corrosion Inhibitor

Interfacial behavior of cysteine (Cys) between mild steel and sulfuric acid solution as a corrosion inhibitor has been studied with electrochemical AC (alternating current) and DC (direct current) techniques at (25.0±0.1) °C. The AC impedance results were evaluated using equivalent circuits in which a constant phase element (CPE) has been replaced with double layer capacitance (C_dl) to represent the frequency distribution of experimental data. Changes in impedance parameters (charge transfer resistance and double layer capacitance) indicated that cysteine molecules acted by accumulating at the metal/solution interface. The fractional coverage of the metal surface () was determined using AC impedance results and it was found that the adsorption of cysteine on the mild steel surface followed a Langmuir isotherm model with a standard free energy of adsorption (ΔG⁰_ads) of −35.1 kJ·mol⁻¹.To clarify the type of interaction between mild steel surface and cysteine molecules with a molecular orbital approach, electronic properties, such as, the highest occupied molecular orbital (HOMO) energy, the lowest unoccupied molecular orbital (LUMO) energy, and the frontier molecular orbital coefficients have been calculated. Energy gaps for the interaction of mild steel surface and cysteine molecules (E_{LUMO Fe}−E_{HOMO Cys} and E_{LUMO Cys}−E_{HOMO Fe}) were used to determine whether cysteine molecules acted as electron donors or electron acceptors when they interacted with the mild steel surface. The local reactivity was evaluated through the condensed Fukui indices. Theoretical calculations were carried out using the density functional theory (DFT) at B3LYP level with the 6-311++G(d,p) basis set for all atoms by Gaussian 03W program.     

Inclusion of aramid chains into the layered silicates through solution intercalation route

Aramid–organoclay nanocomposites were fabricated through solution intercalation technique. Montmorillonite was modified with p-amino benzoic acid in order to have compatibility with the matrix. The effect of clay dispersion and the interaction between clay and polyamide chains on the properties of nanocomposites were investigated using X-ray diffraction (XRD), transmission electron microscopy (TEM), tensile testing of thin films, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and water uptake measurements. Excessive clay dispersion was achieved even on the addition of high proportions of clay. The structural investigations confirmed the formation of delaminated nanostructures at low clay contents and disordered intercalated morphology at higher clay loadings. The tensile behavior and thermal stability significantly amplified while permeability reduced with increasing dispersibility of organoclay in the polyamide matrix.     

Miscibility studies of PVC/Aramid blends

Blends containing PVC and aramid (Ar) matrices were probed for their miscibility. In this respect, Ar chains were synthesized by aromatic diamine and diacid chloride in amide solvent. The Ar thus synthesized was characterized through Fourier transform infrared (FTIR) spectroscopy and molecular weight determination. Blend system Ar/PVC was investigated over a range of Ar/PVC ratios. Their mechanical profiles in terms of maximum stress, maximum strain, toughness, and initial moduli have been explored. Thermal properties and morphology of the blends were estimated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). A good correlation was observed between thermal, mechanical, and morphological properties of the blends. The presence of hydrogen bonding among polymers was evaluated through FTIR spectroscopy, which is believed to be responsible for the blend miscibility. Optimal thermal and mechanical profiles were depicted by the blend containing 40-wt% PVC in the Ar matrix.     

Zn(II) and Co(II) 3D Coordination Polymers Based on 2-Iodoterephtalic Acid and 1,2-bis(4-pyridyl)ethane: Structures and Sorption Properties

Metal-organic frameworks [M₂(2-I-bdc)₂bpe] (M = Zn(II) (1), Co(II) (2), 2-I-bdc = 2-iodoterephtalic acid, and bpe = 1,2-bis(4-pyridyl)ethane) were prepared and characterized by X-ray diffractometry. Both compounds retain their 3D structure after the removal of guest DMF molecules. Selectivity of sorption of different organic substrates from the gas phase was investigated for both complexes.