The skeletal rearrangement of gold- and platinum-catalyzed cycloisomerization of cis-4,6-dien-1-yn-3-ols: pinacol rearrangement and formation of bicyclo[4.1.0]heptenone and reorganized styrene derivatives

With gold and platinum catalysts, cis-4,6-dien-1-yn-3-ols undergo cycloisomerizations that enable structural reorganization of cyclized products chemoselectively. The AuCl3-catalyzed cyclizations of 6-substituted cis-4,6-dien-1-yn-3-ols proceeded via a 6-exo-dig pathway to give allyl cations, which subsequently undergo a pinacol rearrangement to produce reorganized cyclopentenyl aldehyde products. Using chiral alcohol substrates, such cyclizations proceed with reasonable chirality transfer. In the PtCl2-catalyzed cyclization of 7,7-disubstituted cis-4,6-dien-1-yn-3-ols, we obtained exclusively either bicyclo[4.1.0]heptenones or reorganized styrene products with varied substrate structures. On the basis of the chemoselectivity/structure relationship, we propose that bicyclo[4.1.0]heptenone products result from 6-endo-dig cyclization, whereas reorganized styrene products are derived from the 5-exo-dig pathway. This proposed mechanism is supported by theoretic calculations.     

Prolongation of the active lifetime of a biomolecular motor for in vitro motility assay by using an inert atmosphere

Over the last few decades, the in vitro motility assay has been performed to probe the biophysical and chemo-mechanical properties as well as the self-organization process of biomolecular motor systems such as actin-myosin and microtubule-kinesin. However, aggression of the reactive oxygen species (ROS) and concomitant termination of the activity of biomolecular motors during investigation remains a drawback of this assay. Despite enzymatic protection that makes use of a combination of glucose, glucose oxidase, and catalase, the active lifetime of biomolecular motors is found to be only a few hours and this short lifetime restricts further study on those systems. We have solved this problem by using a newly developed system of the in vitro motility assay that is conducted in an inert nitrogen gas atmosphere free of ROS. Using microtubule-kinesin as a model system we have shown that our system has prolonged the active lifetime of the biomolecular motor until several days and even a week by protecting it from oxidative damage.     

Effect of ethylene-co-vinyl acetate-glycidylmethacrylate and cellulose microfibers on the thermal,rheological and biodegradation properties of poly(lactic acid) based systems

The properties and biodegradation behavior of blends of poly(lactic acid) (PLA) and ethylene-vinyl acetate-glycidylmethacrylate copolymer (EVA-GMA), and their composites with cellulose microfibers (CF) were investigated. The blends and composites were obtained by melt mixing and the morphology, phase behavior, thermal and rheological properties of PLA/EVA-GMA blends and PLA/EVA-GMA/CF composite films were investigated as a function of the composition. The disintegrability in composting conditions was examined by means of morphological, thermal and chemical analyses to gain insights into the post-use degradation processes. The results indicated a good compatibility of the two polymers in the blends with copolymer content up to 30 wt.%, while at higher EVA-GMA content a phase separation was observed. In the composites, the presence of EVA-GMA contributes to improve the interfacial adhesion between cellulose fibers and PLA, due to interactions of the epoxy groups of GMA with hydroxyls of CF. The addition of cellulose microfibers in PLA/EVA-GMA system modifies the rheological behavior, since complex viscosity increased in presence of fibers and decreased with an increase in frequency. Disintegration tests showed that the addition of EVA-GMA influence the PLA disintegration process, and after 21 days in composting conditions, blends and composites showed faster degradation rate in comparison with neat PLA due to the different morphologies induced by the presence of EVA-GMA and CF phases able to allow a faster water diffusion and an efficient PLA degradation process.     

Molecularly imprinted polyaniline-polyvinyl sulphonic acid composite based sensor for para-nitrophenol detection

We report results of the studies relating to the fabrication and characterization of a conducting polymer based molecularly imprinted para-nitrophenol (PNP) sensor. A water pollutant, para-nitrophenol is electrochemically imprinted with polyvinyl sulphonic acid (PVSA) doped polyaniline onto indium tin oxide (ITO) glass substrate. This PNP imprinted electrode (PNPI-PANI-PVSA/ITO) prepared via chronopotentiometric polymerization and over-oxidation is characterized by Fourier transform infra-red spectroscopy (FT-IR), UV–visible (UV–vis) spectroscopy, contact angle (CA), scanning electron microscopy (SEM), cyclic voltammetry (CV) and differential pulse voltammetry (DPV) studies. The response studies of PNPI-PANI-PVSA/ITO electrode carried out using DPV reveal a lower detection limit of 1 × 10⁻³ mM, improved sensitivity as 1.5 × 10⁻³ A mM⁻¹ and stability of 45 days. The PNPI-PANI-PVSA/ITO electrode shows good precision with relative standard deviation of 2.1% and good reproducibility with standard deviation of 3.78%.     

Near‐IR Absorbing Ruthenium Complexes of Non‐Innocent 6,12‐Di(pyridin‐2‐yl)indolo[3,2‐b]carbazole: Variation as a Function of Co‐Ligands

This article deals with the hitherto unexplored metal complexes of deprotonated 6,12‐di(pyridin‐2‐yl)‐5,11‐dihydroindolo[3,2‐b]carbazole (H₂L). The synthesis and structural, optical, electrochemical characterization of dimeric [{Ru^III(acac)₂}₂(μ‐L^.?)]ClO₄ ([ 1 ]ClO₄, S=1/2), [{Ru^II(bpy)₂}₂(μ‐L^.?)](ClO₄)₃ ([ 2 ](ClO₄)₃, S=1/2), [{Ru^II(pap)₂}₂(μ‐L^2?)](ClO₄)₂ ([ 4 ](ClO₄)₂, S=0), and monomeric [(bpy)₂Ru^II(HL^?)]ClO₄ ([ 3 ]ClO₄, S=0), [(pap)₂Ru^II(HL^?)]ClO₄ ([ 5 ]ClO₄, S=0) (acac=σ‐donating acetylacetonate, bpy=moderately π‐accepting 2,2’‐bipyridine, pap=strongly π‐accepting 2‐phenylazopyridine) are reported. The radical and dianionic states of deprotonated L in isolated dimeric 1 ⁺/ 2 ³⁺ and 4 ²⁺, respectively, could be attributed to the varying electronic features of the ancillary (acac, bpy, and pap) ligands, as was reflected in their redox potentials. Perturbation of the energy level of the deprotonated L or HL upon coordination with {Ru(acac)₂}, {Ru(bpy)₂}, or {Ru(pap)₂} led to the smaller energy gap in the frontier molecular orbitals (FMO), resulting in bathochromically shifted NIR absorption bands (800–2000 nm) in the accessible redox states of the complexes, which varied to some extent as a function of the ancillary ligands. Spectroelectrochemical (UV/Vis/NIR, EPR) studies along with DFT/TD‐DFT calculations revealed (i) involvement of deprotonated L or HL in the oxidation processes owing to its redox non‐innocent potential and (ii) metal (Ru^III/Ru^II) or bpy/pap dominated reduction processes in 1 ⁺ or 2 ²⁺/ 3 ⁺/ 4 ²⁺/ 5 ⁺, respectively.     

Betacyanins and Betaxanthins in Cultivated Varieties of Beta vulgaris L. Compared to Weed Beets

There are 11 different varieties of Beta vulgaris L. that are used in the food industry, including sugar beets, beetroots, Swiss chard, and fodder beets. The typical red coloration of their tissues is caused by the indole-derived glycosides known as betalains that were analyzed in hypocotyl extracts by UV/Vis spectrophotometry to determine the content of betacyanins (betanin) and of betaxanthins (vulgaxanthin I) as constituents of the total betalain content. Fields of beet crops use to be also infested by wild beets, hybrids related to B. vulgaris subsp. maritima or B. macrocarpa Guss., which significantly decrease the quality and quantity of sugar beet yield; additionally, these plants produce betalains at an early stage. All tested B. vulgaris varieties could be distinguished from weed beets according to betacyanins, betaxanthins or total betalain content. The highest values of betacyanins were found in beetroots ‘Monorubra’ (9.69 mg/100 mL) and ‘Libero’ (8.42 mg/100 mL). Other beet varieties contained less betacyanins: Sugar beet ‘Labonita’ 0.11 mg/100 mL; Swiss chard ‘Lucullus,’ 0.09 mg/100 mL; fodder beet ‘Monro’ 0.15 mg/100 mL. In contrast with weed beets and beetroots, these varieties have a ratio of betacyanins to betaxanthins under 1.0, but the betaxanthin content was higher in beetcrops than in wild beet and can be used as an alternative to non-red varieties. Stability tests of selected varieties showed that storage at 22 °C for 6 h, or at 7 °C for 24 h, did not significantly reduce the betalain content in the samples.     

Simultaneous multiresidue determination of 48 pesticides in Yeongsan and Sumjin River water using GC-NPD and confirmation via GC-MS

In a continuation of our earlier work, a multiresidual analytical method using 48 frequently used neutral pesticides in a water matrix was developed and validated in this study. The samples were extracted with dichloromethane and the pesticides were analyzed via GC-NPD followed by confirmation with GC-MS. Good linearity was detected over a concentration range of 0.01-1.0 microg/mL with correlation coefficients (r(2) ) in excess of 0.982. The recoveries were measured between 70.7 and 111.4% for the majority of the targeted pesticides with relative standard deviations (RSDs) of less than 20%. The LODs and LOQs were in ranges of 0.1-2 and 0.33-6.6 microg/L, respectively. A total of 66 water samples were collected from different locations in Yeongsan and the Sumjin River, Republic of Korea, and were analyzed in accordance with the developed method. None of the water samples were determined to contain any of the targeted pesticides. The method has been shown to be simpler, faster, and more cost-effective than the method established by the Environmental Protection Agency (EPA).     

Bioactive isocoumarins from a terrestrial Streptomyces sp. ANK302

Four isocoumarins have been isolated from the terrestrial Streptomyces sp. ANK302, namely 6,8-dimethoxy-3-methylisocoumarin (1), 6,8-dihydroxy-3-methylisocoumarin (2), 6,8-dihydroxy-7-methoxy-3-methylisocoumarin (3), and 6,7,8-trimethoxy-3-methylisocoumarin (4). Compound 1 is a new naturally-occurring isocoumarin, and 2 was isolated as a new bacterial product. The structures 1-4 were deduced from high resolution mass, 1D and 2D NMR spectra and by comparison with related compounds from the literature. Compound 2 showed a strong zoosporicidal activity at a concentration of 5 microg/mL against a phytopathogenic oomycete, Plasmopara viticola, and 1 was active against     

Reactions of [HOs3(CO)8{µ3-Ph2PCH(R)P(Ph)C6H4}] (R = H,Me) with Bu3SnH: synthesis and structure of bimetallic Os-Sn clusters

Reactions of unsaturated [HOs₃(CO)₈{µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] (R?=?H, Me) with Bu₃SnH are examined. [HOs₃(CO)₈{µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] reacts with Bu₃SnH at room temperature to afford [H₂Os₃(CO)₈(SnBu₃){µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] (1) via oxidative addition of the Sn?H bond to the parent cluster. Heating 1 in refluxing toluene leads to the formation of [H₂Os₃(CO)₇(SnBu₃){µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] (2) through decarbonylation. Cluster 2 exists in two isomeric forms in solution which has been probed by VT NMR spectroscopy. The new Os-Sn bimetallic clusters have been characterized by a combination of analytical and spectroscopic data together with single-crystal X-ray diffraction analysis.

Graphic abstract

     

TRANSITION METAL,NON-METAL CARBONYL CLUSTRS AS SUPPORTS FOR UNUSUAL ACETYLIDE REACTIVITY

Group 16 elements serve as useful bridging and stabilising single atom ligands in mixed-metal carbonyl complexes and impart unusual reactivity on coordinated acetylenic moieties. Reactions of [Fe ₃ (CO) ₉ (μ ₃ -E) ₂ ] (E = S, or Se) with mononuclear acetylide complexes, [CpM(CO)_3-x(CCR)] (M = Mo or W, x = 0, R = Ph; M = Fe, x = 1, R = Ph or ferrocenyl) under facile conditions yield complexes featuring acetylide coupling, acetylide-flip and formation of oxo and acetylide-bridged complexes. In presence of free acetylenes, unusual ligand systems arising from C─S bond formation are observed and under certain conditions, formation of quinones by coupling of acetylenes with carbon monoxide is facilitated.