Determination of phenolic compounds in modern and old varieties of durum wheat using liquid chromatography coupled with time-of-flight mass spectrometry

An evaluation of the grain functional components of Italian durum wheat cultivars was conducted. The raw material was obtained from the field trial performed in 2006–2007 at the Experimental Farm of the University of Bologna, (Bologna, Italy). The aim of this study was to define the phytochemical profile of ten varieties, comprised of old and modern durum wheat genotypes, including quantitative and qualitative phenolic and flavonoid content (free and bound forms). The results showed that mean values of total phenolic compound and total flavonoid content in old wheat varieties (878.2 ± 19.0 μmol gallic acid equivalent/100 g of grain and 122.6 ± 25.4 μmol catechin equivalent/100 g of grain, respectively) did not differ significantly from those detected in modern genotypes (865.9 ± 128.9 μmol gallic acid equivalent/100 g and 123.5 ± 20.6 μmol catechin equivalent/100 g, respectively). However, the HPLC–ESI-TOF-MS analysis highlighted remarkable differences between modern and old cultivars. The interpretation of the mass spectra allowed the identification of 70 phenolic compounds, including coumarins, phenolic acids, anthocyanins, flavones, isoflavones, proanthocyanidins, stilbenes and lignans. The free extracts of ancient wheat varieties showed the presence of a mean number of phenolic compounds and isomer forms (8.7 ± 2.5 and 7.7 ± 4.7 respectively) significantly higher than in modern genotypes (4.4 ± 2.9 and 2.0 ± 2.4, respectively). A similar trend was observed also for the bound phenolic fraction. Moreover, the phytochemical profiles showed the presence of unique phenolic compounds in both free and bound fractions of some of the investigated wheat genotypes. Results highlighted that investigated old wheat cultivars may offer unique nutraceutical values for their peculiar contents in bioactive phytochemicals, suggesting their uses into a wide range of regular and specialty products naturally enriched with health-promoting compounds.     

A highly efficient stereocontrolled synthesis of (S)-2′,6′-dimethyltyrosine [(S)-DMT]

A new, practical and very convenient stereocontrolled synthesis of (S)-2′,6′-dimethyltyrosine [(S)-Dmt] 4 was accomplished in a good yield, starting from the chiral synthon 1,4-N,N-[(S)-phenylethyl]-piperazine-2,5-dione 1. The procedure, which is an extension of our original strategy and occurs with a high level of stereoselectivity (>98%), is simple and inexpensive allowing us to prepare the unnatural α-aminoacid (S)-Dmt also on a multi-gram scale.     

Custom‐Fit Ruthenium(II) Metallopeptides: A New Twist to DNA Binding With Coordination Compounds

A new bipyridine building block has been used for the solid‐phase synthesis of dinuclear DNA‐binding ruthenium(II) metallopeptides. Detailed spectroscopic studies suggest that these compounds bind to the DNA by insertion into the DNA minor groove. Moreover, the potential of the solid‐phase peptide synthesis approach is demonstrated by the straightforward synthesis of an octaarginine derivative that shows effective cellular internalization and cytotoxicity linked with strong DNA interaction, as evidenced by steady‐state fluorescence spectroscopy and AFM studies.     

Metal ion catalysis in the beta-elimination reactions of N-[2-(4-pyridyl)ethyl]quinuclidinium and N-[2-(2-pyridyl)ethyl]quinuclidinium in aqueous solution

Catalysis of the beta-elimination reaction of N-[2-(4-pyridyl)ethyl]quinuclidinium (1) and N-[2-(2-pyridyl)ethyl]quinuclidinium (2) by Zn(2+) and Cd(2+) in OH(-)/H(2)O (pH = 5.20-6.35, 50 degrees C, and mu = 1 M KCl) has been studied. In the presence of Zn(2+), the elimination reactions of both isomers occur from the Zn(2+)-complexed substrates (C). The equilibrium constants for the dissociation of the Zn(2+)-complexes are as follows: K(d) = 0.012 +/- 0.003 M (isomer 1) and K(d) = 0.065 +/- 0.020 M (isomer 2). The value of k(C)(H2O) for isomer 1 is 4.81 x 10(-6) s(-1). For isomer 2 both the rate constants for the "water" and OH(-)-induced reaction of the Zn(2+)-complexed substrate could be measured, despite the low concentration of OH(-) in the investigated reaction mixture [k(C)H2O)= 1.97 x 10(-6) s(-1) and k(C)(OH-)= 21.9 M(-1) s(-1), respectively]. The measured metal activating factor (MetAF), i.e., the reactivity ratio between the complexed and the uncomplexed substrate, is 8.1 x 10(4) for the OH(-)-induced elimination of 2. This high MetAF can be compared with the corresponding proton activating factor (Alunni, S.; Conti, A.; Palmizio Errico, R. J. Chem. Soc., Perkin Trans. 2 2000, 453), PAF = 1.5 x 10(6) and is in agreement with an E1cb irreversible mechanism (A(xh)D(E)* + D(N)) (Guthrie, R. D.; Jencks, W. P. Acc. Chem. Res. 1989, 22, 343). A value of k(C)(H2O)>or= 23 x 10(-7) s(-1) is estimated for the Cd(2+)-complexed isomer 2, while catalysis by Cd(2+) has not been observed for isomer 1.     

Expanded Pyridiniums: Bis‐cyclization of Branched Pyridiniums into Their Fused Polycyclic and Positively Charged Derivatives—Assessing the Impact of Pericondensation on Structural,Electrochemical, Electronic,and Photophysical Features

This study evaluates the impact of the extension of the π‐conjugated system of pyridiniums on their various properties. The molecular scaffold of aryl‐substituted expanded pyridiniums (referred to as branched species) can be photochemically bis‐cyclized into the corresponding fused polycyclic derivatives (referred to as pericondensed species). The representative 1,2,4,6‐tetraphenylpyridinium ( 1^H ) and 1,2,3,5,6‐pentaphenyl‐4‐(p‐tolyl)pyridinium ( 2^Me ) tetra‐ and hexa‐branched pyridiniums are herein compared with their corresponding pericondensed derivatives, the fully fused 9‐phenylbenzo[1,2]quinolizino[3,4,5,6‐def]phenanthridinium ( 1^H f ) and the hitherto unknown hemifused 9‐methyl‐1,2,3‐triphenylbenzo[h]phenanthro[9,10,1‐def]isoquinolinium ( 2^Me f ). Combined solid‐state X‐ray crystallography and solution NMR experiments showed that stacking interactions are barely efficient when the pericondensed pyridiniums are not appropriately substituted. The electrochemical study revealed that the first reduction process of all the expanded pyridiniums occurs at around ?1 V vs. SCE, which indicates that the lowest unoccupied molecular orbital (LUMO) remains essentially localized on the pyridinium core regardless of pericondensation. In contrast, the electronic and photophysical properties are significantly affected on going from branched to pericondensed pyridiniums. Typically, the number of absorption bands increases with extended activity towards the visible region (down to ca. 450 nm in MeCN), whereas emission quantum yields are increased by three orders of magnitude (at ca. 0.25 on average). A relationship is established between the observed differential impact of the pericondensation and the importance of the localized LUMO on the properties considered: predominant for the first reduction process compared with secondary for the optical and photophysical properties.     

The development of a gas chromatographic–mass spectrometric analytical procedure for the determination of lipids,proteins and resins in the same paint micro-sample avoiding interferences from inorganic media

This paper presents a GC–MS analytical procedure for determining proteinaceous materials, glycerolipids, natural waxes and terpenoid resins in the same paint micro-sample. The procedure is also reliable when high amounts of interfering inorganic pigments, dryers and charges are present. The characterisation of proteinaceous binders in a paint sample can be subject to analytical interferences by inorganic materials. Such materials may form complexes with functional groups of proteins, thus preventing their efficient derivatisation, which is necessary prior to GC analysis. For this reason an analytical procedure has been developed based on two extractions and a clean-up step, in order to obtain two fractions: a lipid-resinous fraction and a proteinaceous fraction. The lipid-resinous fraction is subjected to salification/saponification assisted by microwaves, followed by acidification, extraction, derivatisation and GC–MS analysis. The proteinaceous fraction is analysed by GC–MS after hydrolysis and derivatisation of the freed amino acids. The desalting step is applied before the hydrolysis, and is based on the use of the monolithic sorbent tip technology with a C4 stationary phase. Reference paint replicas of egg, casein and animal glue were prepared with and without several metals containing pigments, and used to develop and validate the analytical procedure. The procedure proved to be efficient in desalting the proteinaceous materials both from cations and anions. Although non quantitative, it is reliable in the analysis of samples whose content of extractable proteins is <1 μg, thus showing it to be suitable for the characterisation of paint samples. An example of how the analytical procedure was used to characterise a sample from a 15th century panel painting is also discussed.     

Liquid chromatography/tandem mass spectrometry for the identification and determination of trichothecenes in maize

A reliable, sensitive and selective liquid chromatography/tandem mass spectrometry (LC/MS/MS) method has been developed to determine four trichothecene mycotoxins (nivalenol, deoxynivalenol, fusarenon X and 3-acetyldeoxynivalenol) in maize. Sample preparation was performed by extracting the analytes with a mixture of acetonitrile and water, followed by a solid-phase extraction with Carbograph-4 cartridges as the purification step. For the LC/MS/MS analysis two interfacing systems, Turbo IonSpray (TISP) and atmospheric pressure chemical ionization (APCI), were compared in both negative and positive ion modes. LC and MS parameters were optimized to achieve better results and sensitivity. The effect of mobile phase modifiers such as ammonium acetate and formic acid on the ionization yield was also evaluated. The best results were obtained using the electrospray ionization (ESI) interface in negative ion mode and the multiple reaction monitoring mode (MRM) for the quantitation. The detection limits ranged between 10 ng/g for fusarenon X and 1.5 ng/g for deoxynivalenol. A linear working range was achieved with a standard deviation between 3 and 10% and recovery rates from the maize samples above 81%. The procedure was applied to the analysis of a set of maize samples collected from farms located in different areas of northern and central Italy. The investigated samples turned out to be contaminated primarily with deoxynivalenol and, to a minor extent, with its derivatives.     

Stability of chromogenic colour prints in polluted indoor environments

Chromogenic colour prints are known to be sensitive to storage environments. However, limited research is available on the effect of atmospheric pollutants on these materials, especially pollutants generated indoors. The stability of photographic dyes is of particular interest and the rate of their change can be best described using the standard RGB colour model. Therefore, the colourimetric method was compared to dye extraction and liquid chromatographic analysis to justify its use as a rapid, non-destructive method for quantitative assessment of the rate of change in dye content of colour photographs during degradation. The effects of typical indoor (acetic acid, formaldehyde) and outdoor (nitrogen dioxide) generated pollutants on chromogenic colour prints were then investigated at 80 °C, 60% RH. It was identified that acetic acid leads to the most pronounced changes in photographic dye concentrations, which is significant considering that acetic acid is often the most prominent pollutant in archival environments. On the other hand, formaldehyde exhibited a slight protective effect in comparison to the blank experiment.     

Phosphido‐diphosphine pincer group 3 complexes as efficient initiators for lactide polymerization

New Group 3 metal complexes of the type [LM(CH₂SiMe₃)₂(THF)_n] supported by tridentate phosphido‐diphosphine ligands [(o‐C₆H₄PR₂) ₂ PH; L1‐H : R = iPr; L2‐H : R = Ph] have been synthesized by reaction of L1‐H and L2‐H with [M(CH₂SiMe₃)₃(THF)₂)] (M = Y and Sc). All the new complexes [(o‐C₆H₄PR₂) ₂ PM(CH₂SiMe₃)₂(THF)_n] [M = Y, R = iPr (1), R = Ph (2); M = Sc, R = iPr (3), R = Ph (4)] were studied as initiators for the ring opening polymerization of lactide. The yttrium complexes ( 1 and 2 ) exhibited high activity and good polymerization control, shown by the linear fits in the plot of number‐averaged molecular weight (M_n) versus the percentage conversion and versus the monomer/initiator ratio and by the low polydispersity index values. Interestingly, very good molar‐mass control was observed even when L ‐Lactide was polymerized in the absence of solvent at 130 °C. A good molar‐mass control but lower activities were observed in the polymerization reaction of lactide promoted by the analogous scandium complexes 3 and 4 . © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1374–1382, 2010