Planar catechin analogues with alkyl side chains: a potent antioxidant and an alpha-glucosidase inhibitor

Planar catechin analogues having various alkyl side chain lengths were synthesized, and their remarkable antioxidative abilities and alpha-glucosidase inhibitory activities are shown.     

Evaluation of left ventricular function with cardiac magnetic resonance imaging using Fourier fitting

The aims of this study were to investigate the applicability of Fourier fitting in the magnetic resonance (MR) evaluation of left ventricular (LV) function and to determine the optimal number of harmonics for fitting. Cine cardiac MR imaging was performed in 10 subjects, and an LV time–volume curve was generated. Fourier fitting was applied to the original curve using 1–10 harmonics, and the qualities of the time–volume curve and first-derivative curve were evaluated. LV functional parameters were calculated from curves generated with and without fitting. The quality of the original time–volume curve was good, and Fourier fitting had no substantial effect on functional parameters obtained directly from the time–volume curve such as ejection fraction. The first-derivative curve generated without fitting showed substantial artificial fluctuation. The application of Fourier fitting depressed the fluctuation and tended to decrease estimates of peak ejection rate and peak filling rate. Five or six harmonics appeared to be appropriate for obtaining a high-quality first-derivative curve. In conclusion, Fourier fitting was indicated to aid in reducing the artificial fluctuation of the first-derivative curve generated from cine cardiac MR imaging and to contribute to the evaluation of functional parameters derived from the first-derivative curve.     

A carbaboranylmercuric salt catalyzed reaction; highly regioselective cycloisomerization of 1,3-dienes

The combination of carbaboranylmercuric chloride (new type of bulky Lewis acid) and silver triflate efficiently catalyzes cycloisomerization of 1,3-dienes at room temperature. The catalytic system gives allyl-substituted azacycles and cycloalkanes in excellent yields with high to complete regioselectivity.     

Simple and accurate scheme to compute electrostatic interaction: Zero-dipole summation technique for molecular system and application to bulk water

The zero-dipole summation method was extended to general molecular systems, and then applied to molecular dynamics simulations of an isotropic water system. In our previous paper [I. Fukuda, Y. Yonezawa, and H. Nakamura, J. Chem. Phys. 134, 164107 (2011)], for evaluating the electrostatic energy of a classical particle system, we proposed the zero-dipole summation method, which conceptually prevents the nonzero-charge and nonzero-dipole states artificially generated by a simple cutoff truncation. Here, we consider the application of this scheme to molecular systems, as well as some fundamental aspects of general cutoff truncation protocols. Introducing an idea to harmonize the bonding interactions and the electrostatic interactions in the scheme, we develop a specific algorithm. As in the previous study, the resulting energy formula is represented by a simple pairwise function sum, enabling facile applications to high-performance computation. The accuracy of the electrostatic energies calculated by the zero-dipole summation method with the atom-based cutoff was numerically investigated, by comparison with those generated by the Ewald method. We obtained an electrostatic energy error of less than 0.01% at a cutoff length longer than 13 A for a TIP3P isotropic water system, and the errors were quite small, as compared to those obtained by conventional truncation methods. The static property and the stability in an MD simulation were also satisfactory. In addition, the dielectric constants and the distance-dependent Kirkwood factors were measured, and their coincidences with those calculated by the particle mesh Ewald method were confirmed, although such coincidences are not easily attained by truncation methods. We found that the zero damping-factor gave the best results in a practical cutoff distance region. In fact, in contrast to the zero-charge scheme, the damping effect was insensitive in the zero-charge and zero-dipole scheme, in the molecular system we treated. We discussed the origin of this difference between the two schemes and the dependence of this fact on the physical system. The use of the zero damping-factor will enhance the efficiency of practical computations, since the complementary error function is not employed. In addition, utilizing the zero damping-factor provides freedom from the parameter choice, which is not trivial in the zero-charge scheme, and eliminates the error function term, which corresponds to the time-consuming Fourier part under the periodic boundary conditions.     

Non-Maxwellian shape of electron distribution function in ionacoustic turbulence

In a DC discharge plasma system, in which two meshes are installed, the current-driven ion acoustic instability is excited when a de potential V_m is applied to one of them. When the instability fully grows, the system reaches a very turbulence state, the so-called ion acoustic turbulence. The experimental measurement of energy distribution function of electrons in ion acoustic turbulence measured by the Langmuir probe shows a non-Maxwellian nature along with electron heating     

Voltammetric study of the transfer of polyammonium ions at nitrobenzene / water interface.

The transfer of polyammonium ions, poly[(dimethylimino)-1,6-hexanediyl] (n = 140, n being the degree of polymerization) ion and poly[(dimethylimino)(2-oxo-1,2-ethanediyl)imino-alpha,omega-alkanediylimino(1-oxo-1,2-ethanediyl)(dimethylimino)-alpha',omega'-alkanediyl] ([-N+ (CH3)2CH2CONH(CH2)x NHCOCH2N+ (CH3)2(CH2)y-]n, x = 2, 3, 4, or 6, y = 3 or 6, and n = 30-130) ions, at a polarizable nitrobenzene / water interface has been studied by normal pulse voltammetry and cyclic voltammetry. Despite the polydispersity of the preparations, by normal pulse voltammetry, an S-shaped current-potential curve with a well-defined limiting current, and, by cyclic voltammetry, a pair of anodic and cathodic peak currents due to the transfer of polyammonium ions across the interface were observed within the potential window. The voltammetric behavior is described. Also, the effect of ion-pair formation of the polyammonium ions with supporting electrolyte anions in nitrobenzene- and water-phases on the half-wave or midpoint potential of the ion-transfer, and the relation between the structure of the polyammonium ions and the transfer potentials are discussed.     

Simultaneous direct determination of aluminum, calcium and iron in silicon carbide and silicon nitride powders by slurry-sampling graphite furnace AAS.

A fast and accurate analytical method was established for the simultaneous direct determination of aluminum, calcium and iron in silicon carbide and silicon nitride powders by graphite furnace atomic absorption spectrometry using a slurry sampling technique and a Hitachi Model Z-9000 atomic absorption spectrometer. The slurry samples were prepared by the ultrasonication of silicon carbide or silicon nitride powders with 0.1 M nitric acid. Calibration curves were prepared by using a mixed standard solution containing aluminum, calcium, iron and 0.1 M nitric acid. The analytical results of the proposed method for aluminum, calcium and iron in silicon carbide and silicon nitride reference materials were in good agreement with the reference values. The detection limits for aluminum, calcium and iron were 0.6 microg/g, 0.15 microg/g and 2.5 microg/g, respectively, in solid samples, when 200 mg of powdered samples were suspended in 20 ml of 0.1 M nitric acid and a 10 microl portion of the slurry sample was then measured. The relative standard deviation of the determination of aluminum, calcium and iron was 5 - 33%.     

Mechanism of Enzymatic Hydrolysis of Poly(butylene succinate) and Poly(butylene succinate‐co‐L‐lactate) with a Lipase from Pseudomonas cepacia

Enzymatic hydrolysis of poly(butylene succinate) (PBS) and poly(butylene succinate‐co‐L ‐lactate) (PBSL) has been studied by using a lipase originated from Pseudomonas cepacia. It has been found that the drawn fibers of PBSL are readily hydrolyzed by the action of the lipase, while those of PBS undergo little enzymatic hydrolysis. Since the polymer films of PBS and PBSL are readily hydrolyzed under the same conditions, the enzymatic hydrolysis should depend not only on the crystallinity but also on the molecular orientation. The molecular weight of the samples gradually decreases with incubation time, because nonspecific hydrolysis occurs on the main chains of both PBS and PBSL even in the absence of lipase. The enzymatic hydrolysis of PBS and PBSL gives 4‐hydroxybutyl succinate (HBS) as the main product with traces of succinic acid and butane‐1,4‐diol together with L ‐lactic acid in the case of PBSL. In addition, the hydrolysis rate of the carboxyl end‐capped PBS is much slower than that of the original or hydroxyl end‐capped PBS. These results imply a hydrolysis mechanism involving the preferential exo‐type chain scission from the carboxyl terminals.

Mass remaining of various PBS and PBSL samples as a function of time.