A mediator-type biosensor as a new approach to biochemical oxygen demand estimation

A novel biosensor for the determination of biochemical oxygen demand (BOD) was developed using potassium hexacyanoferrate(III) [HCF(III)] as a mediator. The sensor element consists of a three-electrode system, with both working and counter electrodes compactly integrated as a disposable using etching and electroplating processes. Pseudomonas fluorescens biovar V (isolated from a wastewater treatment plant) was immobilized on the surface of the working electrode using poly(vinyl alcohol)-quaternized stilbazol (PVA-SbQ) photopolymer gel. Synthetic wastewater described by the Organization for Economic Cooperation and Development (OECD) was used as a standard solution instead of glucose-glutamic acid synthetic wastewater. The conditions of amperometric measurement were optimized at +600 mV (vs. Ag/AgCl) operating potential, namely 40 mM HCF(III) in a 0.1 M phosphate buffer (pH 7.0) at 20 degrees C. The sensor response was linear from 15 up to 200 mg O l-1 BOD. The response time was 15 min at 200 mg O l-1 BOD. To demonstrate the wide metabolic range of activity of the sensor, the sensor response to 14 substances in four categories of organic compounds was investigated. Further, it was shown that the response of this BOD sensor was not influenced in samples with low concentrations of dissolved oxygen under the measuring conditions used. For real wastewaters, the BOD values were determined using the sensor and compared favorably with those determined by the conventional BOD5 method.     

A critical review on the dynamics of Jovian atmospheres

Some basic theoretical issues of the Jovian atmospheric dynamics are discussed. Those include the depth of the motions, thermal convection both with deep and shallow configurations, the two-dimensional turbulence theory and its relevance. The refractive index analysis is suggested to interpret the coherent structures like Jupiter's Great Red Spot in terms of Charney-Drazin constraint based on the observations. A possibility of Jovian data assimilation is proposed as a future direction.     

Remarkably Selective Ag(+) Extraction and Transport by Thiolariat Ethers

Synthesis and metal binding properties of thiolariat ethers, where a sulfide side chain is introduced into a framework of a crown ether, have been performed. Remarkably high Ag(+) selectivity among heavy metal ions was observed in solvent extraction and transport across a liquid membrane using thiolariat ethers with a 15-crown-5 ring as carriers. Thiolariat ethers with a 12-crown-4 or a 18-crown-6 do not exhibit such a high Ag(+) selectivity. The former binds metal ions weakly, and the latter recognizes Pb(2+) as well as Ag(+). The corresponding oxygen analogs, i.e. lariat ethers, do not show Ag(+) selectivity. The Ag(+) binding strength of the sulfoxide and sulfone analogs is much lower than that of thiolariat ethers. Thiolariat ethers with a benzocrown framework containing a sulfide chain at the 4 position of the benzene nucleus showed very low affinity to Ag(+). Extractability and transport ability using various thiolariat ether derivatives strongly suggested that this high Ag(+) selectivity is a result of the synergistic coordination of the ring oxygen and the sulfur atom of the thiolariat ether. NMR chemical shifts of protons and carbons in the proximity of the sulfur atom of the thiolariat ether were changed significantly in accordance with the synergistic coordination described above. 1:1 Complexation between a thiolariat ether and Ag(+) were supported by a Job plot using the chemical shift of the methylene protons adjacent to the sulfur atom.     

Efficient and widely applicable method of constructing neo-proteoglycan utilizing copper(I) catalyzed 1,3-dipolar cycloaddition

Efficient constructions of two types of neo-proteoglycan are described. Enzymatically prepared alkyne containing chondroitin 6-sulfate chains and chemically synthesized azido group having compounds are linked by utilizing the copper(I) catalyzed 1,3-dipolar cycloaddition.     

Synthesis of inorganic-organic hybrids by incorporation of inorganic components into organic polymer using metal alkoxides

Inorganic-organic hybrids have been synthesized by incorporation of the inorganic component of Ti(OC₂H₅)₄ into the organic polymer of ethyl cellulose. The inorganic-organic hybrids did not dissolve in toluene used as a solvent for the starting materials. The ethanol was formed as a by-product of the alcoholysis condensation reaction between Ti(OC₂H₅)₄ and ethyl cellulose. These results suggest that ethoxy groups of Ti(OC₂H₅)₄ react with hydroxy groups of ethyl cellulose to form cross-linking bonds of –O–Ti–O–. The reaction of Ti(OC₂H₅)₄ with ethyl cellulose was further investigated by Fourier transform infrared (FT-IR) spectroscopy. The FT-IR spectroscopic experiments revealed that the Ti–O bond state of Ti(OC₂H₅)₄ was changed by refluxing a toluene solution of Ti(OC₂H₅)₄ with ethyl cellulose. The inorganic-organic hybrids have an interesting dielectric property; their dielectric constant is higher than that of ethyl cellulose and that of a simple mixture of TiO₂ and ethyl cellulose.     

The structure of enopeptins A and B, novel depsipeptide antibiotics

The structures of enopeptins A and B, novel depsipeptide antibiotics with 1,3,5,7,9-decapentaene-1,10-dicarboxylic acid and 2-amino-3-hydroxycyclopent-2-enone in a side chain, were determined by chemical and spectroscopic means.     

General synthesis of sugar-pendant 1,3-propanediamines containing a C-glycoside linkage

A straightforward route to C-glycoside linked sugar-pendant 1,3-propanediamines is described. The three-step preparation procedure involves (1) C-glycosylation of an OH-protected α-glycosyl halide with malononitrile, (2) catalytic hydrogenation of the nitriles to amines, and (3) deprotection of acetyl groups via acid-catalyzed hydrolysis. In the case of the galactose derivative, excess sodiomalononitrile promotes the second addition of a carbanion in the first step. The β-anomeric configuration was confirmed by X-ray crystallography of the glycosylated intermediates. This method demonstrates a general method to access a new class of carbohydrate-pendant C-glycoside chelators.     

Pre-fibrillation of pulps to manufacture cellulose nanofiber-reinforced high-density polyethylene using the dry pulp direct kneading method

The dry pulp direct kneading method is an industrially viable, low-energy process for manufacturing cellulose nanofiber (CNF)-reinforced polymer composites, where the chemically modified pulps are nanofibrillated and uniformly dispersed in the polymer matrix during melt compounding. In the present study, cellulose fibers of various sizes ranging from surface-fibrillated pulps (20 μm in width) to fine CNFs (20 nm in width) were prepared from softwood bleached kraft pulps using a refiner and a high-pressure homogenizer. These cellulose fibers were modified with alkenyl succinic anhydride and dried. The dried fibers were used as a feed material for melt compounding in the dry pulp direct kneading method to fabricate CNF-reinforced high-density polyethylene (HDPE). When surface-fibrillated pulps were employed as a feed material, the pulps were nanofibrillated and dispersed uniformly in the HDPE matrix during melt compounding. The resulting composites had much better properties—i.e., much higher tensile modulus and strength values, and much lower coefficient of thermal expansion values—than the composites produced using pulps without pre-fibrillation. However, when CNFs were used as a feed material, they were shortened and agglomerated during melt compounding, and the properties of the composites consequently deteriorated. The study concludes that surface-fibrillated pulp, which can be produced cost-effectively using a refiner on an industrial scale, is more suitable as a feed material than CNFs for melt compounding in the dry pulp direct kneading method. This finding enables the elimination of a preliminary step in the preparation of CNFs from pulps, which is a time-consuming and energy-intensive process.

Graphical abstract

     

High-resolution Mn EXAFS of the oxygen-evolving complex in photosystem II: structural implications for the Mn4Ca cluster

The biological generation of oxygen by the oxygen-evolving complex in photosystem II (PS II) is one of nature's most important reactions. The recent X-ray crystal structures, while limited by resolutions of 3.2-3.5 A, have located the electron density associated with the Mn4Ca cluster within the multiprotein PS II complex. Detailed structures critically depend on input from spectroscopic techniques, such as EXAFS and EPR/ENDOR, as the XRD resolution does not allow for accurate determination of the position of Mn/Ca or the bridging and terminal ligand atoms. The number and distances of Mn-Mn/Ca/ligand interactions determined from EXAFS provide important constraints for the structure of the Mn4Ca cluster. Here, we present data from a high-resolution EXAFS method using a novel multicrystal monochromator that show three short Mn-Mn distances between 2.7 and 2.8 A and, hence, the presence of three di-mu-oxo-bridged units in the Mn4Ca cluster. This result imposes clear limitations on the proposed structures based on spectroscopic and diffraction data and provides input for refining such structures.     

Application of Hot Press Sintering to Na2O-B2O3-SiO2 Gels Containing Quantum Dots for Lowering of Densification Temperature

Na₂O-B₂O₃-SiO₂ (NBS) gels containing a large amount of CdS quantum-dots (10 wt%) were densified using the hot press (HP) sintering method. By HP treatment, full-densification temperature could be lowered by about 40°C than that of the normal non-pressing (NP) heat treatment. Exciton absorption of CdS quantum-dots in HP-sample showed a large blue shift compared with that in the NP sample, and the size-distribution of CdS dots remained very sharp, with a mean particle diameter d = 3.66 nm and a standard deviation of = 0.72. HP pressure had a large effect on the reduction of sintering temperature and time, resulting in the suppression of the aggregation and growth of CdS quantum-dots in NBS glasses.