Direct patterning of poly(amic acid) and low‐temperature imidization using a crosslinker,a photoacid generator,and a thermobase generator

A positive‐type photosensitive polyimide (PSPI) based on poly(amic acid) (PAA), a crosslinker 1,1,1‐tris{4‐[2‐(vinyloxy)ethoxy]phenyl}ethane (TVPE), a photoacid generator (PAG) (5‐propylsulfonyloxyimino‐5H‐thiophen‐2‐ylidene)‐2‐(methylphenyl)acetonitrile (PTMA), and a thermobase generator (TBG) t‐butyl 2,6‐dimethylpiperidine‐1‐carboxylate (BDPC) has been developed as a promising material in microelectronics. The PAA was prepared from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 4,4′‐oxydianiline (ODA) in dimethyl sulfoxide (DMSO). The PSPI, consisting of PAA (69 wt %), TPVE (21 wt %), PTMA (3 wt %), and BDPC (7 wt %), showed high sensitivity of 21 mJ/cm² and a high contrast of 6.8 when it was exposed to a 436‐nm line (g‐line), postbaked at 90 °C for 5 min, and developed with 1.69 wt % TMAHaq. A clear positive image of 8 μm line and space pattern was printed on film, which was exposed to 50 mJ/cm² of g‐line by a contact printing mode and fully converted to the corresponding polyimide (PI) pattern on heating at 200 °C, confirmed by FTIR spectroscopy. Thus, this system will be a good candidate for next generation PSPIs. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3362–3369, 2009     

An Enhanced Arimoto Theorem on Threshold Transformations

It is proved that there exists a threshold transformation of {0,1} ⁿ such that for any 1≤k≤2 ⁿ , its graph has a k-cycle that is the only cycle or loop. Implications on dynamical systems of neural networks are also discussed. Received: September 24, 1997 Final version received: September 21, 1998     

Binary 1,4-asymmetric induction from a single allyltin reagent with a chiral nitrogen functional group toward aldehydes

Using a single allyltin reagent with a chiral nitrogen functionality, binary and remote asymmetric induction was realized toward various aldehydes. Either syn- or anti-1,4-amino-alcohols were selectively obtained with the use of Yb(OTf)₃ or SnCl₄, respectively. The structures of both diastereomers were identified by means of X-ray analysis.     

Low-temperature specific heat study of SrCu2(BO3)2 with an exactly solvable ground state

The specific heat of a two-dimensional spin gap system SrCu₂(BO₃)₂ realizing the Shastry-Suther-land model was measured between 1.3 and 25 K under various magnetic fields up to 12 T. The analysis based on an isolated dimer model in a low temperature region revealed that the value of the spin gap at zero field is Δ = 34.4 K. It turned out that Δ decreases in proportion to H due to the Zeeman splitting of the excited triplet levels. This simplest model, however, fails to reproduce the result in a high-temperature region, suggesting rather strong spin-spin correlation of the system.     

Negative‐type photosensitive poly(phenylene ether) based on poly(2,6‐dimethyl‐1,4‐phenylene ether), a crosslinker,and a photoacid generator

A negative‐type photosensitive poly(phenylene ether) (PSPPE) based on poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE), a novel crosslinker 4,4′‐methylene‐bis [2,6‐bis(methoxymethyl)phenol] (MBMP) having good compatibility with PPE, and diphenylidonium 9,10‐dimethoxy anthracene‐2‐sulfonate (DIAS) as a photoacid generator (PAG) has been developed. This resist consisting of PPE (73 wt %), MBMP (20 wt %) and DIAS (7 wt %) showed a high sensitivity (D_0.5) of 58 mJ/cm² and a contrast (γ_0.5) of 9.5 when it was exposed to i‐line (365 nm wavelength light), postexposure baked at 145 °C for 10 min, and developed with toluene at 25 °C. A fine negative image featuring 6 μm line‐and‐space pattern was obtained on the film exposed to 300 mJ/cm² of i‐line by a contact‐printed mode. The resulting polymer film cured at 300 °C for 1 h under nitrogen had a low dielectric constant (ε = 2.46) comparable to that of PPE and a higher T_g than that of PPE. In addition, the cured PSPPE film was pretty low water absorption (<0.05%) as same as PPE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4949–4958, 2008     

A computational analysis of strained laminar flame propagation in a stratified CH4/H2/air mixture

Propagation of a H₂-added strained laminar CH₄/air flame in a rich-to-lean stratified mixture is numerically studied. The back-support effect, which is known to enhance the consumption speed of a flame propagating into a leaner mixture compared to that into a homogeneous mixture, is evaluated. A new method is devised to characterize unsteady reactant-to-reactant counterflow flames under transiently decreasing equivalence ratio, in order to elucidate the influence of flow strain on the back-support effect. In contrast to the conventional reactant-to-product configurations, the current configuration is more relevant to unsteady stratified flames back-supported by their own combustion products. Moreover, since H₂ distribution downstream of the flame is known to play a crucial role in back-supported CH₄/air flames, the influence of H₂ addition in the upstream mixture is examined. The results suggest that a larger strain rate leads to a larger equivalence ratio gradient at the reaction zone through increased flow divergence, which amplifies the back-support. Meanwhile, since H₂ addition in the upstream mixture does not affect the downstream H₂ content, the relative increase in the consumption speed, i.e. the back-support, is suppressed with larger H₂ addition. Especially, when the upstream H₂ content decreases with the equivalence ratio, the H₂ preferentially diffuses toward the unburned gas, which mitigates H₂ accumulation in the preheat zone and further weakens the back-support.     

Cobalt-catalyzed regioselective [3+2] annulation of ortho-formyl and acetyl substituted phenylboronic acids with alkynes

Treatment of alkynes with ortho-formyl and acetyl phenylboronic acids in the presence of a cobalt catalyst resulted in the formation of 2,3-disubstituted indenols in good yields. When aryl silyl alkynes were used, 2-aryl-3-silyl indenols were obtained regioselectively in good yields.     

Enantioselective alkynylation of carbonyl compounds with trimethoxysilylalkynes catalyzed by lithium binaphtholate

Enantioselective alkynylation of aldehydes and ketones was accomplished using trimethoxysilylalkynes as alkynylating reagents and lithium 3,3′-diphenylbinaphtholate as a catalyst. Optically active propargylic alcohols were obtained in good to high chemical yields and enantioselectivities. Alkynylation of acetylpyridines afforded biologically active pyridyl propargylic alcohols in good enantioselectivities.