Parathyroid hormone and bone mineral content in male and female patients receiving hemodialysis

Relative bone mineral content in the lumbar spine was measured by phantom B-MAs with the apparatus of computerized tomography in order to study the relationships between bone mineral content with age and parathyroid hormone in sera of randomized out- and in-patients and the hemodialysis patients. There exists a significant difference between male and female in the loss of bone mineral content of three groups.     

Clinical evaluation of osteocalcin in sera of the patients with neoplasms of bone

The clinical significance of osteocalcin in sera of bone tumors were measured in sera of various kinds of bone tumors. The levels of osteocalcin were higher in bone tumors than those in normal subjects. Serum osteocalcin levels in hypercalcemic groups of bone metastasis and myeloma showed a remarkable increase in a parallelism with serum ALP and LDH levels. These results suggested to be directly or indirectly activated on osteoblast by bone tumors and to be synthesized osteocalcin in osteoblast.     

The study in the relationship between serum calcium and serum parathyroid hormone (PTH) by employing the various kits of PTH assay

In order to evaluate the influences of serum PTH assay in the various concentrations of serum calcium, we divided into three groups which serum calcium had below 8.0 mg/dl, 8.2 mg/dl to 9.8 mg/dl and above 10.0 mg/dl at random samples and assayed PTH in serum sample, using various kits of PTH assay obtained from commercial sources. Our results suggested that the measurement of serum PTH influenced by the concentration of serum calcium and therefore, should be taken an attention of serum calcium in each sample.     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

Kinetic and ESR studies on the radical polymerization of Di-n-butyl itaconate in benzene

The polymerization of di-n-butyl itaconate (DBI) intiated with AIBN was kinetically investigated in benezene. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.5[DBI]^1.7. The polymerization showed a considerably low overall activation energy of 15.3 kcal/mol. The initiator efficiency of AIBN in this system decreased with increasing DBI concentration, ranging from 0.34 to 0.55°C, which is ascribable to viscosity effect due to the monomer. From an ESR study, the polymerization system was found to involve two kinds of persistent radicals, namely, primary propagating ( III ) and propagating ( I ) radicals. The relative concentration of III to I increased with decreasing monomer concentration. Azo-nitrile initiators such as AVN and ACN similarly produced two persistent radicals, while MAIB, DBPO, and PBO yielded only propagating radical I as persistent. The MAIB-initiated polymerization of DBI was also performed in benzene. Similar kinetic features were observed, that is, a higher dependence of R_p on the DBI concentration and a low overall activation energy (14.4 kcal/mol). The following rate equation was obtained at 50°C:R_p = k[MAIB]^0.5[DBI]^1.6. The initiator efficiency of MAIB decreased with increasing DBI concentration, ranging from 0.32 to 0.53 at 50°C. The concentration of propagating radical I was determined by ESR at 50 and 61°C, from which k_p and k_t were estimated. The k_p value increased with increasing monomer concentration, while the k_t one decreased with the DBI concentration. These values are much lower compared with those of MMA.     

Synthesis and calcium antagonistic activity of (+)-(R)- and (-)-(S)-3-acetyl-2-[5-methoxy-2-[4-[N-methyl-N-(3,4,5- trimethoxyphenethyl)amino]butoxy]phenyl]benzothiazoline hydrochloride

SA2572 ((+)-1), 3-acetyl-2-[5-methoxy-2-[4-[N-methyl-N-(3,4,5-trimethoxyphenethyl) amino] butoxy]phenyl]-benzothiazoline hydrochloride is a newly synthesized Ca2+ antagonist having a inhibitory effect on the fast Na+ inward channel. In order to clarify the absolute configurations and the pharmacological properties of both enantiomers, compounds ((+)-1 and (-)-1) were synthesized. The configurations of these compounds were assigned on the basis of an X-ray crystallographic analysis of synthetic precursor (5). The in vitro Ca2+ channel blocking activities of (+)-1 and (-)-1 were evaluated in terms of the inhibitory activities on depolarization-induced contraction of guinea pig taenia cecum and rabbit aorta. The in vivo efficacy of the enantiomers was evaluated with their hypotensive effects in spontaneously hypertensive rats. Compound (-)-1 showed more potent Ca2+ antagonistic activities on guinea pig taenia cecum and rabbit aorta and the hypotensive effect than those activities of (+)-1. In the electrophysiological study of Langendorff perfused rabbit hearts, compound (+)-1 showed more potent inhibitory effect on the fast Na+ inward channel than that of compound (-)-1, and an approximately equal potent inhibitory effect on the slow Ca2+ inward channel as compared with compound (-)-1. Stereoselectivity of the pharmacological activity was found.     

Theoretical investigation of CO interaction with copper sites in zeolites: periodic DFT and hybrid quantum mechanical/interatomic potential function study

Periodic DFT and combined quantum mechanics/interatomic potential function (QM-pot) models were used to describe the interaction of CO with the Cu+ sites in FER. The CO stretching frequencies were calculated using omega(CO)(CCSD(T))/r(CO)(DFT) scaling method relating frequencies determined using a high-level quantum-chemical (coupled clusters) method for simple model carbonyls to CO bond lengths calculated using periodic DFT and QM-pot methods for the Cu+-zeolite system. Both periodic DFT and QM-pot models together with omega(CO)/r(CO) scaling describe the CO stretching dynamics with the "near spectroscopic accuracy", giving nu(CO) = 2156 cm(-1) in excellent agreement with experimental data. Calculations for various Cu+ sites in FER show that both types of Cu+ sites in FER (channel-wall sites and intersection sites) have the same CO stretching frequencies. Thus, the CO stretching frequencies are not site-specific in the CO/Cu+/FER system. The convergence of the results with respect to the model size was analyzed. When the same exchange-correlation functional is used the adsorption energies from periodic DFT and QM-pot are in good agreement (about 2 kcal/mol difference) but substantially larger than those of the experiment. The adsorption energy calculated with the B3LYP functional agrees with available experimental data. The overestimation of the adsorption energy in DFT calculations (periodic or QM-pot) is related to a red-shift of the CO stretching mode, both result from an underestimation of the HOMO(5sigma)-LUMO(2pi) gap of CO and the consequent overestimation of the Cu(+)(d)-CO(2pi*) back-donation. For the adsorption energy, this can be overcome by the use of hybrid B3LYP exchange-correlation functional. For the frequency calculations, the DFT problem can be overcome by the use of the omega(CO)(CCSD(T))/r(CO)(DFT) correlation.     

Single-Round DNA Aptamer Selection by Combined Use of Capillary Electrophoresis and Next Generation Sequencing: An Aptaomics Approach for Identifying Unique Functional Protein-Binding DNA Aptamers

In DNA aptamer selection, existing methods do not discriminate aptamer sequences based on their binding affinity and function and the reproducibility of the selection is often poor, even for the selection of well-known aptamers like those that bind the commonly used model protein thrombin. In the present study, a novel single-round selection method (SR-CE selection) was developed by combining capillary electrophoresis (CE) with next generation sequencing. Using SR-CE selection, a successful semi-quantitative and semi-comprehensive aptamer selection for thrombin was demonstrated with high reproducibility for the first time. Selection rules based on dissociation equilibria and kinetics were devised to obtain families of analogous sequences. Selected sequences of the same family were shown to bind thrombin with high affinity. Furthermore, data acquired from SR-CE selection was mined by creating sub-libraries that were categorized by the functionality of the aptamers (e. g., pre-organized aptamers versus structure-induced aptamers). Using this approach, a novel fluorescent molecular recognition sensor for thrombin with nanomolar detection limits was discovered. Thus, in this proof-of-concept report, we have demonstrated the potential of a “DNA Aptaomics” approach to systematically design functional aptamers as well as to obtain high affinity aptamers.     

X-ray structure analysis of trans-1,4-polybutadiene

The crystal structure of trans-1,4-polybutadiene has been reported by Natta et al. to be pseudo-hexagonal below its solid-phase transition temperature. In the present X-ray structure analysis, it is revealed that the crystal belongs to the monoclinic system with the space group P2¹/a. The unit cell, with the lattice constants a = 8.63 Å, b = 9.11 Å, c = 4.83 Å, and β = 114°, includes four molecular segments.     

Revisiting the Rate-Limiting Step of the ANS–Protein Binding at the Protein Surface and Inside the Hydrophobic Cavity

8-Anilino-1-naphthalenesulfonic acid (ANS) is used as a hydrophobic fluorescence probe due to its high intensity in hydrophobic environments, and also as a microenvironment probe because of its unique ability to exhibit peak shift and intensity change depending on the surrounding solvent environment. The difference in fluorescence can not only be caused by the microenvironment but can also be affected by the binding affinity, which is represented by the binding constant (K). However, the overall binding process considering the binding constant is not fully understood, which requires the ANS fluorescence binding mechanism to be examined. In this study, to reveal the rate-limiting step of the ANS–protein binding process, protein concentration-dependent measurements of the ANS fluorescence of lysozyme and bovine serum albumin were performed, and the binding constants were analyzed. The results suggest that the main factor of the binding process is the microenvironment at the binding site, which restricts the attached ANS molecule, rather than the attractive diffusion-limited association. The molecular mechanism of ANS–protein binding will help us to interpret the molecular motions of ANS molecules at the binding site in detail, especially with respect to an equilibrium perspective.