Total synthesis of buergerinin F via effective construction of the asymmetric quaternary carbons using an enantioselective aldol reaction

An efficient method for the synthesis of (+)-buergerinin F is established via the enantioselective aldol reaction of a tetra-substituted ketene silyl acetal with crotonaldehyde, followed by intramolecular Wacker-type ketalization.     

The effective use of substituted benzoic anhydrides for the synthesis of carboxamides

Various carboxamides are synthesized from the corresponding carboxylic acids and amines with high product-selectivities using 2-methyl-6-nitrobenzoic or 2,4,6-trichlorobenzoic anhydride in the presence of 4-(dimethylamino)pyridine.     

Asymmetric total synthesis of octalactin B using a new and rapid lactonization

A method for the synthesis of octalactin B is established via a new and quite effective mixed-anhydride lactonization for the synthesis of an eight-membered ring moiety using 2-methyl-6-nitrobenzoic anhydride with DMAP. Both an optically active linear precursor of the lactone and a side chain of octalactins are prepared by the enantioselective aldol reaction of ketene silyl acetals with aldehydes.     

Incorporation of lipid domains in Cerasome, a morphologically-stable organic-inorganic vesicular nanohybrid

To extend the concept of the Cerasome, an organic-inorganic vesicular nanohybrid, this paper investigates the preparation and characterization of a “mixed” Cerasome. The system consists of a Cerasome-forming lipid 1, a cationic synthetic lipid 2, and a zwitterionic phospholipid 3. Lipid mixtures of 1 and 2 or 1 and 3 were used to prepare the mixed Cerasomes. Their lipid distributions were examined using differential scanning calorimetry (DSC), which showed that 1 and 2 (or 1 and 3) were phase-separated in the mixed Cerasomes. These results seem to be mainly attributable to the polymerizable nature of 1. Results of scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDX) showed that 1 and 3 were both incorporated into a single Cerasome, not macroscopically separated to form separate vesicles from each lipid component. Mixed Cerasomes of 1 and 2 showed high morphological stability against a membrane-solubilizing surfactant, incorporating up to 70% of 2. On the other hand, the mixed Cerasomes from 1 and 3 were less stable than the mixed Cerasomes from 1 and 2. This relative instability might be attributable to differences between the mixed Cerasomes from 1 and 2 and 1 and 3 in terms of their vesicular sizes, lipid domain sizes, and their relative effectiveness for siloxane network formation. These results strongly support the formation of mixed Cerasomes that have lipid domains in-plane. Systems described in this study are useful to prepare variously mixed Cerasomes that have different surface functionalities and in-plane lipid distribution, but which have high morphological stability.     

Polymerization of coordinated monomers. III. Copolymerization of acrylonitrile–zinc chloride,methacrylonitrile–zinc chloride or methyl methacrylate–zinc chloride complex with styrene

The 1:1 or 2:1 complex of acrylonitrile, methacrylonitrile, or methyl methacrylate with ZnCl₂ was copolymerized with styrene at the temperature of 0–30°C without any initiator. The structure of the copolymer from methyl methacrylate complex and styrene was examined by NMR spectroscopy. The complexes of acrylonitrile or methacrylonitrile with ZnCl₂ gave a copolymer containing about 50 mole-% styrene units. The complexes of methyl methacrylate yielded an alternating copolymer when the feed molar ratio of methyl methacrylate to styrene was small, but with increasing feed molar ratio the resulting copolymer consisted of about 2 moles of methyl methacrylate per mole of styrene. The formation of a charge-transfer complex of styrene with a monomer coordinated to zinc atom was inferred from the ultraviolet spectra. The regulation of the copolymerization was considered to be effected by the charge-transfer complex. The copolymer resulting from the 2:1 methyl methacrylate–zinc chloride complex had no specific tacticity, whereas the copolymer from the 1:1 complex was richer in coisotacticity than in cosyndiotacticity. The change of the composition of the copolymer and its specific tacticity in the polymerization of the methyl methacrylate complex is related to the structure of the complex.     

Deuterium isotope effects on hydrophobic interactions: the importance of dispersion interactions in the hydrophobic phase

Hydrogen/deuterium isotope effects on hydrophobic binding were examined by means of reversed-phase chromatographic separation of protiated and deuterated isotopologue pairs for a set of 10 nonpolar and low-polarity compounds with 10 stationary phases having alkyl and aryl groups bonded to the silica surface. It was found that protiated compounds bind to nonpolar moieties attached to silica more strongly than deuterated ones, demonstrating that the CH/CD bonds of the solutes are weakened or have less restricted motions when bound in the stationary phase compared with the aqueous solvent (mobile phase). The interactions responsible for binding have been further characterized by studies of the effects of changes in mobile phase composition, temperature dependence of binding, and QSRR (quantitative structure-chromatographic retention relationship) analysis, demonstrating the importance of enthalpic effects in binding and differentiation between the isotopologues. To explain our results showing the active role of the hydrophobic (stationary) phase we propose a plausible model that includes specific contributions from aromatic edge-to-face attractive interactions and attractive interactions of aliphatic groups with the pi clouds of aromatic groups present as the solute or in the stationary phase.     

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

The first asymmetric esterification of free carboxylic acids with racemic alcohols using benzoic anhydrides and tetramisole derivatives: an application to the kinetic resolution of secondary benzylic alcohols

A variety of optically active carboxylic esters are produced by the kinetic resolution of racemic secondary benzylic alcohols using free carboxylic acids with benzoic anhydride and tetramisole derivatives. 4-Methoxybenzoic anhydride (PMBA) is the best reagent to use in producing the corresponding esters in high ee when the reaction is catalyzed by (+)-benzotetramisole (BTM); by contrast, when non-substituted benzoic anhydride is used as a coupling reagent, the resulting optically active alcohols are obtained with high selectivities. This protocol directly produces chiral carboxylic esters from free carboxylic acids and racemic secondary alcohols by utilizing the trans-acylation process to generate mixed anhydrides from acid components and benzoic anhydride derivatives under the influence of chiral catalysts.     

Polymerization of coordinated monomers. IV. Copolymerization of methyl methacrylate– and methacrylonitrile–Lewis acid complexes with styrene

Complexes of methyl methacrylate and methacrylonitrile with Lewis acids (SnCl₄, AlCl₃, and BF₃) were copolymerized with styrene at ?75°C under irradiation with a high-pressure mercury lamp in toluene solution. The resulting copolymers consisted of equimolar amount of methyl methacrylate or methacrylonitrile and styrene, regardless of the molar ratio of monomers in the feed. NMR spectroscopy showed the copolymers to have an alternate sequence. The tacticities of the copolymers varied with the complex to have an alternate sequence. The tacticities of the copolymers varied with the complex species: the copolymer from the SnCl₄ complex system had a higher cosyndiotactieity, while those from the AlCl₃ and the BF₃ complex systems showed coisotacticity to predominate over cosyndiotacticity. NMR spectroscopic investigation of the copolymerization system indicated the presence of a charge-transfer complex between the styrene and the methyl methacrylate coordinated to SnCl₄. The concentration of the charge-transfer complex was estimated to be about 30% of monomer pairs at ?78°C at a 1:1 molar ratio of feed. The growing end radicals were identified as a methyl methacrylate radical for the AlCl₃ complex–styrene system and a styrene radical for the SnCl₄ complex–styrene system by the measurement of the ESR spectra of the copolymerization systems under or after irradation with a high-pressure mercury lamp. The tacticity of the resulting polymer appears to be controlled by the structure of the charge transfer complex. In the case of the SnCl₄ complex a certain interaction of SnCl₄ with the growing end radical seems to be a factor controlling the polymer structure. These copolymerizations can be explained by an alternating charge-transfer complex copolymerization scheme.     

Diarylurea-linked zinc porphyrin dimer as a dual-mode artificial receptor: supramolecular control of complexation-facilitated photoinduced electron transfer

A novel porphyrinic receptor 1 in which two zinc porphyrins are bridged by two diarylurea linkers was developed for recognition of a viologen derivative (hexyl viologen, HV). The electronic absorption spectra as well as the 1H NMR experiments revealed that the HV molecule was bound to the cleft in 1 mainly through carbonyl dipole-charge interactions to afford a 1:1 complex. From the steady-state fluorescence spectroscopic study, the photoinduced electron transfer (PET) from 1 to HV was extremely facilitated by the receptor-substrate complexation. The receptor 1 also formed a 1:1 complex with 1,4-diazabicyclo[2.2.2]octane (DABCO) through two Zn-N coordination interactions, and, using DABCO as an inhibitor, we suppressed the PET reaction via the substrate exchange.