Preferential oxidation of carbon monoxide catalyzed by platinum nanoparticles in mesoporous silica

Preferential oxidation (PROX) of CO is an important practical process to purify H2 for use in polymer electrolyte fuel cells. Although many supported noble metal catalysts have been reported so far, their catalytic performances remain insufficient for operation at low temperature. We found that Pt nanoparticles in mesoporous silica give unprecedented activity, selectivity, and durability in the PROX reaction below 353 K. We also studied the promotional effect of mesoporous silica in the Pt-catalyzed PROX reaction by infrared spectroscopy using the isotopic tracer technique. Gas-phase O2 is not directly used for CO oxidation, but the oxygen of mesoporous silica is incorporated into CO2. These results suggest that CO oxidation is promoted by the attack of the surface OH groups to CO on Pt without forming water.     

Surface design for precise control of spatial growth of a mesostructured inorganic/organic film on a large-scale area

A microfabrication technique is presented to fabricate a mesostructured inorganic/organic composite film, i.e., silica/cetyltrimethylammonium chloride (CTAC) film, with near-perfect site-selectivity on a large surface area based on a spatially regulated growth method. To precisely regulate the site-selective growth of this mesocomposite film at the solid/liquid interface, we designed a novel microtemplate consisting of a "dual-component" self-assembled monolayer (SAM) with alternating hydrophobic trifluorocarbon (CF3) and cationic amino (NH2) groups. First, (heptadecafluoro-1,1,2,2-tetrahydrodecyl)trimethoxysilane (FAS)-SAM was formed onto Si substrate covered with native oxide (SiO2/Si) from vapor phase. The substrate was then photolithographically micropatterned using 172 nm vacuum UV light. Finally, the micropatterned FAS-SAM was immersed in a solution of 1 vol % (aminoethylaminomethyl)phenethyltrimethoxysilane (AEAMPS) in absolute toluene. Due to these treatments, a dual-SAM microtemplate with CF3- and NH2-terminated surfaces was fabricated, as evidenced by lateral force microscopy, ellipsometry, and X-ray photoelectron spectroscopy. Using this template, the microfabrication of a mesocomposite film was demonstrated. As a control, the micropatterned hydrophobic FAS-SAM template (composed of CF3- and OH-terminated surfaces) was also treated under the same conditions. Optical microscopy and atomic force microscopy confirmed that the formation of the continuous mesocomposite film proceeded only on the FAS-SAM-covered regions, while the AEAMPS-SAM-covered regions remained free of deposits. This shielding effect also remained constant regardless of the pattern's geometry, i.e., the interval distance between the FAS-SAM-covered areas in the pattern. Through this approach, we were able to obtain well-defined 5-, 10-, and 20-mum wide mesocomposite microlines over the entire 10 x 10 mm2 area with high area-selectivity. On the other hand, when the SiO2 regions were not terminated with the cationic NH2 groups, cluster formation proceeded not only on the hydrophobic CF3 regions but also on the SiO2 regions, particularly with an increase in the pattern interval distance, resulting in lower final pattern resolution.     

Substrate flexibility of vicenisaminyltransferase VinC involved in the biosynthesis of vicenistatin

A glycosyltransferase VinC is involved in the biosynthesis of antitumor beta-glycoside antibiotic vicenistatin. It catalyzes a glycosyl transfer reaction between dTDP-alpha-D-vicenisamine and vicenilactam. Previous identification of its broad substrate specificity toward various glycosyl acceptors enabled us to explore the potential of VinC for glycodiversification. In vitro study of the substrate specificity toward several dTDP-sugars with vicenilactam established that VinC displayed activities with alpha-anomers of several dTDP-2-deoxy-D-sugars such as mycarose, digitoxose, olivose, and 2-deoxyglucose to afford respective beta-glycosides. Notably, beta-anomers of dTDP-2-deoxy-D-sugars also appeared to be accepted by VinC to form alpha-glycosides. Furthermore, VinC is capable of catalyzing glycosyl transfer reactions from both the alpha-anomer and beta-anomer of dTDP-l-mycarose, respectively, into beta-glycoside and alpha-glycoside. These results indicate that VinC is a unique glycosyltransferase possessing broad substrate specificity. The mechanism of this axially oriented glycosidic bond formation from the equatorially oriented dTDP-sugar might be explained by conformational change of dTDP-sugar to a boat conformation during the glycosyl transfer reaction. To apply these features of VinC for glycodiversification, 22 sets of structurally diverse glycosides were constructed using unnatural glycosyl donors and acceptors.     

Long hydrogen-bonded rod of molecular oxide: a hexatantalate tetramer

A tetra-n-butylammonium (TBA) salt of [H(4.5)(Ta(6)O(19))](3.5-) was synthesized by reacting hydrous tantalum oxide with TBAOH. X-ray structural analysis of TBA(3.5)[H(4.5)(Ta(6)O(19))]·2THF·5.5H(2)O (THF = tetrahydrofuran) revealed that this compound consists of a hydrogen-bonded, rod-shaped tetramer of hexatantalate that is almost 30 ? long together with TBA cations and solvent molecules of crystallization [a = 20.6354(5) ?, b = 25.5951(7) ?, c = 37.2058(8) ?, α = 77.092(1)°, β = 86.177(1)°, γ = 88.683(1)°, V = 19110.9(8) ?(3), Z = 8, and space group P ?1]. (1)H NMR spectra showed that this tetrameric structure is maintained in solution.     

Anion photoelectron spectroscopy of germanium and tin clusters containing a transition- or lanthanide-metal atom; MGe(n)- (n = 8-20) and MSn(n)- (n = 15-17) (M = Sc-V, Y-Nb, and Lu-Ta)

The electronic properties of germanium and tin clusters containing a transition- or lanthanide-metal atom from group 3, 4, or 5, MGe(n) (M = Sc, Ti, V, Y, Zr, Nb, Lu, Hf, and Ta) and MSn(n) (M = Sc, Ti, Y. Zr, and Hf), were investigated by anion photoelectron spectroscopy at 213 nm. In the case of the group 3 elements Sc, Y, and Lu, the threshold energy of electron detachment of MGe(n)(-) exhibits local maxima at n = 10 and 16, while in the case of the group 4 elements Ti, Zr, and Hf, it exhibits a local minimum only at n = 16, associated with the presence of a small bump in the spectrum. A similar behavior is observed for MSn(n)(-) around n = 16, and these electronic characteristics of MGe(n) and MSn(n) are closely related to those of MSi(n). Compared to MSi(n), however, the larger cavity size of a Ge(n) cage allows metal atom encapsulation at a smaller size n. A cooperative effect between the electronic and geometric structures of clusters with a large cavity of Ge(16) or Sn(16) is discussed together with the results of experiments that probe their geometric stability via their reactivity to H(2)O adsorption.     

Iron-catalyzed sulfonyl radical formations from sulfonylhydrazides and oxidative addition to alkenes

Generation of sulfonyl radicals from sulfonylhydrazides has been achieved in the presence of a non-toxic iron catalyst and oxygen. The intermolecular addition of resultant sulfonyl radicals to alkenes affords β-hydroxysulfone compounds.     

Preconcentration of Trace Elements in Water for Speciation Studies

Trace element speciation has recently become one of the most important problems in water analysis. Proper combination of preconcentration techniques with instrumental determination methods is essential to speciation analysis, because sensitivity and selectivity of direct determination methods are generally lacking. The present paper describes such preconcentration techniques as filtration, centrifugation, flotation and sorption, which have been developed in the author's laboratory for the speciation of heavy metals in river and pond waters by electron microscopy, X-ray microanalysis and chemical analysis. The application of freeze concentration to the speciation of silica in high-purity waters is also discussed.     

Visco-elastic properties of reentrant nematic liquid crystalline mixtures

The visco-elastic properties for binary mixtures of 4-n -hexyloxy-4′-cyanobiphenyl (6OCB) and 4-n-octyloxy-4′-cyanobiphenyl (8OCB) are investigated in detail by a light scattering technique. The mixtures exhibit a reentrant nematic (RN) phase between the smectic A (SmA) and crystal phases in the range 22.0–29.5 wt % of 6OCB. The viscosity and the elastic constant increase with cooling in both the nematic and reentrant nematic phases. It is also found that the mixtures exhibit anomalously large values of viscosity and elastic constant near the phase transition, i.e. a pretransitional phenomenon can be observed. The activation energy for viscosity is smaller in the RN phase than in the ordinary nematic phase appearing at higher temperatures, while the normalized elastic constant (defined as the ratio of the elastic constant to the square of the dielectric anisotropy) is larger. Moreover, the visco-elastic behaviour depends on the specific time during which the sample has been kept in the SmA phase. These results confirm that the SmA phase has a strong influence on the formation of molecular aggregates, which plays an important role in the reentrant phenomenon of these systems.     

Molecular weight between entanglements for linear d-glucans

Dynamic viscoelasticity measurements were carried out for concentrated solutions of linear d-glucans in BmimCl to examine the effect of the linkage between repeating units of glucose on the rheological properties. The values of molecular weight between entanglements (M _e) were determined for four d-glucans: curdlan, pullulan, cellulose, and amylose. From the concentration dependence of M _e, the value of M _e in the molten state (M _e,melt) for each d-glucan was estimated as a material constant. The order of M _e,melt became cellulose?<?pullulan?<?curdlan?<?amylose, indicating that the linkage is actually influential in M _e,melt for the linear d-glucans. The relationship between M _e,melt and the molecular structure of the d-glucans were discussed assuming that the values of M _e,melt for the d-glucans primarily reflect the chain stiffness such as the characteristic ratio C _∞ on the analogy of synthetic polymers. Although the trend was not so clear, it was shown that N _unit is a decreasing function of C _∞ .     

Phase-separation and distribution of phenyl groups for PhTES-TEOS coatings prepared on polycarbonate substrate

Phenyltriethoxysilane (PhTES) and tetraethoxysilane (TEOS) coatings [xPhTES·(100 − x)TEOS (mol%)] (x = 0 − 80) were prepared on polycarbonate (PC) substrate, and adhesion, surface hardness and distribution of phenyl groups were studied. The coatings with more than 60 mol% of PhTES showed good adhesion (≈ 100%), and the pencil hardness of PC substrate (4B) improved to 2B or B after the coatings. Bulk gels with the same compositions were also prepared, and distribution of phenyl groups were estimated using fourier transform infrared (FT-IR) spectroscopy (KBr method for bulk gels and attenuated total reflection (ATR) method for coatings). A significant difference for the distribution of phenyl groups was clearly observed between bulk gels and coatings, suggesting PC substrate affects the distribution of phenyl groups in coatings. The adhesion and FTIR results revealed that there is an interaction caused by π-electrons between benzene rings on PC substrate and phenyl groups of PhTES-TEOS coatings. It was found that the adhesion was strongly correlated with the phenylsilsesquioxane networks formed around PC substrate side.