A theoretical study of the dielectric solvent effect on vicinal spin coupling constants

The dielectric solvent effect on HCCH, HCNH and HCNC spin coupling constants in ethane, tetrachloroethane and trans N-methylformamide has been calculated by finite perturbation theory based on the INDO and CNDO/2 approximations incorporating solvaton theory. The available experimental data are interpreted using the calculated variations of spin coupling constants. The effect of dielectric constant on the general form of the Karplus relation is included in the finite perturbation calculations.     

A new synthetic pathway of segmented tri-block copolyether

A new synthetic pathway of A–B–A tri-block copolyether which is composed of a hydrophilic poly(oxyethylene) unit as an A part and a hydrophobic poly(oxy-2-methyl-trimethylene) unit as a B part is proposed. Telechelic α-tosyl-ω-tosyloxypoly(oxy-2-methyl-trimethylene) derived from tosylation of poly(oxy-2-methyl-trimethylene glycol) (PMTG) was allowed to react with poly(ethylene glycol) (PEG) in the presence of sodium hydroxide. T_g of the resulting A–B–A tri-block copolyether (PEMG) (M?_n = 1600) was ?72°C and its specific gravity [D₄¹⁵] was 1.055.     

Determination of iodine in organic iodine compounds by non-equilibrium isotope exchange in a heterogeneous exchange system

Some water-soluble organic iodine compounds (aqueous solution) can be analyzed for iodine by isotopically exchanging with labelled elementary iodine (organic solution). The method is applicable to exchange systems in which the rate of the exchange is rather small but measurable, before the exchange equilibrium is attained. The iodine content of iodoaromatic amino acids such as 5-iodouracil and 3,5-diiodotyrosine can be determined within an error of ±4%.     

A new microbial electrode for BOD estimation

A new microbial electrode using immobilizedClostridium butyricum was prepared for biochemical oxygen demand (BOD) estimation of wastewaters. The current of the electrode was decreased with time until a steady state was reached. The steady state current was in all cases attained within 30-40 min at 37°C, and the maximum current output was obtained at 37°C and pH between 6.2 and 7.0. A linear relationship was obtained between the steady state current and BOD. The steady state current values were reproducible within ±7% of the relative error. The BOD of industrial wastewaters can be estimated by using the microbial electrode. Relative error of the BOD estimation of industrial wastewaters was within ± 10%. The current output of the microbial electrode was almost constant for 30 days.     

Determination of arsenic at the picogram level by atomic absorption spectrometry with miniaturized suction-flow hydride generation

A continuous-flow hydride generator is modified and miniaturized for the determination of picogram amounts of arsenic by atomic absorption spectrometry. A 300-μl sample is dropped into a teflon cup and pumped into an alkaline sodium tetrahydroborate stream, which is acidified in a reaction coil. The evolved hydride is swept with argon through a phase separator into an electrically-heated quartz absorption cell and the absorbance is recorded. To eliminate differences in sensitivity between arsenic(III) and arsenic(V) without prereduction by potassium iodide, it is important that arsenic(V) be mixed with tetrahydroborate prior to mixing with hydrochloric acid. The method has a detection limit of 0.08 ng As ml^?1 (24 pg) and the calibrations is linear up to 50 ng As ml^?1. The relative standard deviation for 10 replicate measurements is 5.4% for 0.5 ng As ml^?1. The addition of potassium iodide and hydroxylamine is confirmed to be effective in minimizing some interferences. The sampling rate is 90 h^?1. Results for NBS biological and steel reference materials demonstrate applicability of the technique.     

A free energy calculation study of the effect of H-->F substitution on binding affinity in ligand-antibody interactions

Changes in binding affinity to catalytic antibody 6D9 of chloramphenicol phosphonate derivatives (CPDs) containing H or F were investigated by performing free energy calculations based on molecular dynamics simulations. We calculated the binding free energy, enthalpy, and entropy changes (DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS) attributable to H-->F substitution by comparing results for CPDs containing a trifluoroacetylamino group (CPD-F) or an acetylamino group (CPD-H). The calculated DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS values were -2.9, -6.3, and 3.5 kcal mol(-1) and close to experimental values observed for a series of similar ligands, chloramphenicol phosphonates with F and H (-1.4, -3.5, and 2.1 kcal mol(-1)). Therefore, CPD-F binds more strongly to 6D9 than does CPD-H. To clarify the origin of the large difference in DeltaDeltaG, we apportioned the calculated values of DeltaDeltaG and DeltaG for the associated and dissociated states into contributions from various atomic interactions. We found that the H-->F substitution increased the binding affinity mainly by decreasing the hydration free energy and not by increasing favorable interactions with the antibody. The decreased hydration free energy of the ligand was mainly due to unfavorable coulombic interactions between the trifluoroacetylamino group and solvent waters, which increased the free energy of the dissociated state (by about 3.7 kcal mol(-1)). Also, the trifluoroacetylamino group slightly increased the free energy level of the associated state (about 0.8 kcal mol(-1)) because favorable van der Waals interactions compensated for unfavorable coulombic interactions with antibody atoms. In addition, the enthalpy and entropy changes, DeltaDeltaH and -TDeltaDeltaS (computationally -6.3 and 3.5 kcal mol(-1)), originated mainly from a decrease in hydration free energy in the dissociated state. The CPD-F and CPD-H ligands had substantially different structures in the dissociated and complexed states.     

Infrared intensity in dielectric media by an electrostatic model

A change in an infrared intensity in dielectric media is treated by an electrostatic model. The basic model is originally formalized for a dipolar liquid. The model is satisfactorily applied to the infrared intensity of the C-H stretching of chloroform, which changes 22 times large in the liquid state at -43 degrees C as in the gaseous state. A change in the infrared intensity in lithium ammonium tartrate, where a ferroelectric phase transition takes place, is analyzed on the basis of a local polarization above T(c) or a spontaneous polarization below T(c), deducing important quantities on a phase transition. A difference in the infrared intensity of the C-Br stretching of 1,10-dibromodecane between the urea clathrate and the crystalline state is analyzed by evaluating electric fields due to bond moments and oscillating dipoles. These analyses confirm the mechanism of the change in the absolute infrared intensity, which originates from an electrostatic interaction with an electric field applied to a molecule or a functional group closely related to a normal mode.     

Efficient routes to optically active azido-, amino-, di-azido- and di-amino-cyclitols with chiro- and allo-configuration from myo-inositol

Efficient routes to hitherto unknown 1d-2,5-di-azido-di-deoxy-allo-inositol, 1d-2,5-di-amino-di-deoxy-allo-inositol, 1l-1-azido-1-deoxy-chiro-inositol and 1l-1-amino-1-deoxy-chiro-inositol were developed by using cheaply available myo-inositol as the starting material. Preliminary investigations on the enzyme inhibitory properties were done. The methodology reported is amenable to gram scale synthesis and thus can find application in natural product synthesis.     

Dithiol-mediated immobilization of CdS nanoparticles from reverse micellar system onto Zn-doped silica particles and their high photocatalytic activity

Cds nanoparticles, prepared in a reverse micellar system, were immobilized directly onto alkanedithiol-modified Zn-doped silica particles, which were themselves prepared via hydrolysis of tetraethylorthosilicate in the presence of Zn(NO(3))(2) followed by contact with dithiol molecules. The resulting CdS-Zn-SiO(2) composite was then used as a photocatalyst for the generation of H(2) from 2-propanol aqueous solution. Under UV irradiation (lambda>300 nm), a high photocatalytic activity was observed for the CdS-Zn-SiO(2) composite material. This is effected by electron transfer from the photoexcited ZnS (dithiol-bonded Zn on SiO(2)) to CdS nanoparticles. The photocatalytic activity is increased with a decrease in the number of methylene groups in the dithiol molecules, according to the rank order 1,10-decanedithiol <1,6-hexanedithiol <1,2-ethanedithiol.     

Simultaneous determination of hypoxanthine,inosine, inosine-5′-phosphate and adenosine-5′-phosphate with a multielectrode enzyme sensor

A multielectrode enzyme sensor for the simultaneous determination of adenosine-5′-phosphate (AMP), inosine-5′-phosphate (IMP), inosine (HXR) and hypoxanthine (HX)in fish meat was developed by assembling four enzyme sensors for AMP, IMP, HXR and HX in a flow cell. These compounds were determined from oxygen consumption according to the following reactions: AMP $\text{AD}$ IMP $\text{NT}$ HXR $\text{NP, PO}{}^{\mathrm{3?}}{}_4$ HX $\text{XO, O}{}_2$ Uric acid where AD is AMP deaminase, NT is 5′-nucleotidase, NP is nucleoside phosphorylase and XO is xanthine oxidase. Enzymes were covalently bound to a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane and glutaraldehyde. Sensors for HX, HXR, IMP and AMP were prepared by attaching membranes of XO, XONP, XO NPNT, and of XONPNT and AD, respectively, to four oxygen electrodes. Samples extracted from sea bass, bream, flounder, abalone and arkshell were analyzed within 5 min, from the simultaneous response curves of the four electrodes. Results obtained by the multisensor system were in good agreement with those determined by each single electrode.