Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Synthesis of aromatic polythioamide-oxothioxoquinazolines from bis(1,3,4-thiadiazoline-5-thione) and aromatic bis-o-amino esters

Aromatic polythioamide-oxothioxoquinazolines were synthesized by the polycondensation of 2,2′-(m-phenylene)bis-1,3,4-thiadiazoline-5-thione with aromatic bis-o-amino esters. The polymerizations were carried out at 160°C in acidic media such as m-cresol, sulfolane, and polyphosphoric acid to produce polymers with reduced viscosities up to 0.5 dL/g. These polymers were soluble in polar aprotic solvents like N-methyl-2-pyrrolidone and some acidic media including m-cresol. The polythioamide-oxothioxoquinazolines showed relatively good thermal stability with 10% weight loss at 344–394°C in air.     

Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface covering of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier surfaces were covered with sucrose tristearate (J-1803F) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface covering. These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covering lactose carrier were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. In vitro inhalation properties increased with the percentage of J-1803F added. Using this surface covering system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

Influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier

The influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier was investigated. In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with different particle surface conditions prepared by surface covering. Lactose carrier surfaces were covered with vegetable magnesium stearate (Mg-St-V) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covered lactose carrier were little decreased with increased in relative humidity (RH), showing that the in vitro inhalation properties of salbutamol sulfate were improved at high RH. Using this surface covering technique would thus be valuable for storage humidity of dry powder inhalation (DPI) with lactose carrier particles.     

Studies on steroids. CCLIII. Capillary gas chromatographic behaviour of diethylhydrogensilyl-diethylsilylene derivatives of stereoisomeric bile acids.

The capillary gas chromatographic behaviour of diethylhydrogensilyl (DEHS) ethers and/or diethylsilylene (DES) derivatives of fifty bile acids including 4- and 6-hydroxylated compounds is described. The methylene unit (MU) values of methyl and pentafluorobenzyl esters of bile acids were determined as their trimethylsilyl (TMS), dimethylethylsilyl (DMES) ethers and DEHS-DES derivatives. The differences in methylene unit values between the corresponding TMS ethers and DMES ethers or DEHS-DES derivatives were used for estimating the number and stereochemistry of hydroxyl groups on the steroid nucleus. On treatment with the silylating agent N,O-bis (diethylhydrogensilyl)trifluoroacetamide, bile acids possessing isolated hydroxyl in addition to diaxial trans-glycol groups were easily converted into the DEHS ehters, whereas those having a vicinal glycol group except for the diaxial group were converted into cyclic DES derivatives. The mass spectrometric properties obtained with negative-ion chemical ionization detection are discussed.     

Enantioselective conjugate additions of organolithiums to BHA enoates mediated by A chiral ligand

The conjugate addition reactions of BHA alkenoates with organolithiums in toluene or toluene-hexane at −78 °C were mediated by the chiral ligands 1 and 2 to give the corresponding 3-substituted alkanoates in high ees and high yields. The two ligands are complementary each other, 1 is effective for phenyl- and vinyllithiums to give the adducts in 64–93% ee, while 2 is effective for butyl- and ethyllithiums to give the adducts in 91–99% ee.     

Control of photoinduced energy- and electron-transfer steps in zinc porphyrin-oligothiophene-fullerene linked triads with solvent polarity

The dramatic changes of the lifetimes of the charge-separated (CS) states were confirmed in zinc porphyrin (ZnP)-oligothiophene (nT)-fullerene (C(60)) linked triads (ZnP-nT-C(60)) with the solvent polarity. After the selective excitation of the ZnP moiety of ZnP-nT-C(60), an energy transfer took place from the (1)ZnP moiety to the C(60) moiety, generating ZnP-nT-(1)C(60). In polar solvents, the CS process also took place directly via the (1)ZnP moiety, generating ZnP(*+)-nT-C(60)(*-), as well as the energy transfer to the C(60) moiety. After this energy transfer, an indirect CS process took place from the (1)C(60) moiety. In the less polar solvent anisole, the radical cation (hole) of ZnP(*+)-nT-C(60)(*-) shifted to the nT moiety; thus, the nT moiety behaves as a cation trapper, and the rates of the hole shift were evaluated to be in the order of 10(8) s(-1); then, the final CS states ZnP-nT(*+)-C(60)(*-) were lasting for 6-7 mus. In the medium polar solvent o-dichlorobenzene (o-DCB), ZnP-nT(*+)-C(60)(*-) and ZnP(*+)-nT-C(60)(*-) were present as an equilibrium, because both states have almost the same thermodynamic stability. This equilibrium resulted in quite long lifetimes of the CS states (450-910 mus) in o-DCB. In the more polar benzonitrile, the generation of ZnP-nT(*+)-C(60)(*-) was confirmed with apparent short lifetimes (0.6-0.8 mus), which can be explained by the fast hole shift to more stable ZnP(*+)-nT-C(60)(*-) followed by the faster charge recombination. It was revealed that the relation between the energy levels of two CS states, which strongly depend on the solvent polarity, causes dramatic changes of the lifetimes of the CS states in ZnP-nT-C(60); that is, the most appropriate solvents for the long-lived CS state are intermediately polar solvents such as o-DCB. Compared with our previous data for H(2)P-nT-C(60), in which H(2)P is free-base porphyrin, the lifetimes of the CS states of ZnP-nT-C(60) are approximately 30 times longer than those in o-DCB.     

Simultaneous determination of radionuclides separable into natural decay series by use of time-interval analysis

A delayed coincidence method, time-interval analysis (TIA), has been applied to successive – decay events on the millisecond time-scale. Such decay events are part of the ²²⁰Rn²¹⁶Po (T_1/2 145 ms) (Th-series) and ²¹⁹Rn²¹⁵Po (T_1/2 1.78 ms) (Ac-series). By using TIA in addition to measurement of ²²⁶Ra (U-series) from -spectrometry by liquid scintillation counting (LSC), two natural decay series could be identified and separated. The TIA detection efficiency was improved by using the pulse-shape discrimination technique (PSD) to reject -pulses, by solvent extraction of Ra combined with simple chemical separation, and by purging the scintillation solution with dry N₂ gas. The U- and Th-series together with the Ac-series were determined, respectively, from alpha spectra and TIA carried out immediately after Ra-extraction. Using the ²²¹Fr²¹⁷At (T_1/2 32.3 ms) decay process as a tracer, overall yields were estimated from application of TIA to the ²²⁵Ra (Np-decay series) at the time of maximum growth. The present method has proven useful for simultaneous determination of three radioactive decay series in environmental samples.     

Efficient synthesis and hydrolysis of cyclic oxalate esters of glycols

Based on the mechanism postulated for the formation of the cyclic carbonates 3 in the reactions of glycols 1 with oxalyl chloride in the presence of triethylamine, we present here three efficient syntheses of the cyclic oxalates 2 of various glycols 1 by controlling the formation of 3: replacement of the base by pyridine markedly diminishes yields of 3 in all reactions, realizing dramatic reversals of the product ratios in the reactions with the (R*,R*)-compounds 1g-i,q,r and pinacol (1k); although considerable amounts of the oxalate polymers are formed in the reactions with some (R*,S*)-glycols, this drawback can be removed by the use of 2,4,6-collidine instead of pyridine; 1,1'-oxalyldiimidazole is useful for the synthesis of two selected cyclic oxalates 2e,f. The cyclic oxalates 2 other than trisubstituted and tetrasubstituted ones were found to be very reactive: kinetic studies on the hydrolysis of 1,4-dioxane-2,3-dione (2a) as well as its mono- and some selected 5,6-disubstituted derivatives 2 have revealed that they undergo hydrolysis 260-1500 times more rapidly than diethyl oxalate (12) in acetate buffer-acetonitrile (pH 5.69) at 25 degrees C. Although the cyclic oxalate 21 from cis-1,2-cyclopentanediol (11) was 1.5 times more reactive than 2a, it has been shown with other substrates that increasing number of the alkyl substituents decreases the rate of hydrolysis. On the contrary, the phenyl group was found to have somewhat accelerative effect.     

Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.