Hexaconazole-Micelle Nanodelivery System Prepared Using Different Surfactants for Ganoderma Antifungal Application

Reports on fungicide-based agronanochemicals in combating disastrous basal stem rot disease in the oil palm industry are scant. Herein, we describe the potential of fungicide nanodelivery agents based on hexaconazole-micelle systems produced using three different surfactants; sodium dodecylbenze sulfonate (SDBS), sodium dodecyl sulfate (SDS) and Tween 80 (T80). The resulting nanodelivery systems were characterized and the results supported the encapsulation of the fungicide into the micelles of the surfactants. We have investigated in detail the size-dependent effects of the as-synthesized micelles towards the inhibition growth of Ganoderma Boninense fungi. All the nanodelivery systems indicate that their size decreased as the surfactant concentration was increased, and it directly affects the fungal inhibition. It was also found that Tween 80, a non-ionic surfactant gave the lowest effective concentration, the EC₅₀ value of 2, on the pathogenic fungus Ganoderma boninense compared to the other anionic surfactants; SDBS and SDS. This study opens up a new generation of agronanofungicide of better efficacy for Ganoderma disease treatment.     

Enhancing electrochromic properties of conducting polymers via copolymerization: Copolymer of 1‐(4‐fluorophenyl)‐2,5‐di(thiophen‐2‐yl)‐1H‐pyrrole with 3,4‐ethylene dioxythiophene

A copolymer of 1‐(4‐fluorophenyl)‐2,5‐di(thiophen‐2‐yl)‐1H‐pyrrole (FPTP) with 3,4‐ethylene dioxythiophene (EDOT) was electrochemically synthesized and characterized. While poly(FPTP) (P(FPTP)) has only two colors in its oxidized and neutral states (blue and yellow), its copolymer with EDOT has five different colors (purple, red, light gray, green, and blue). Electrochromic devices based on P(FPTP‐co‐EDOT) and poly(3,4‐ethylenedioxythiophene) (PEDOT) were constructed and characterized. The oxidized state of the device shows blue color whereas it shows purple for the reduced state. At several potentials the device has good transparency with green and gray colors. Maximum contrast (Δ%T) and switching time of the device were measured as 23% and 1.1 s at 555 nm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4496–4503, 2007     

Synthesis and characterization of a new soluble conducting polymer and its electrochromic device

A mixture of isomers 2,5-di(4-methyl-thiophen-2-yl)-1-(4-nitrophenyl)-1H-pyrrole, 2-(4-methyl-thiophen-2-yl)-5-(3-methyl-thiophen-2-yl)-1-(4-nitrophenyl)-1H-pyrrole and 2,5-di(3-methyl-thiophen-2-yl)-1-(4-nitrophenyl)-1H-pyrrole (Me-SNS(NO₂)) were synthesized. Resulting monomers were polymerized chemically, producing soluble polymers in common organic solvents. The average molecular weight has been determined by gel permeation chromatography (GPC) as Mn=5.6×10³ for the chemically synthesized polymer. The monomers were also electrochemically polymerized in the presence of LiClO₄, NaClO₄ (1:1) as the supporting electrolyte in acetonitrile solvent. Resulting polymers were characterized via CV, FTIR, NMR, SEM and UV–Vis spectroscopy. Spectroelectrochemistry analysis of polymer revealed Π–Π^* transition below 300 nm, with an electronic band gap of 2.18 ev. Switching ability of the polymer was evaluated by kinetic study measuring percent transmittance (%T) at the maximum contrast point, indicating that poly(Me-SNS(NO₂)) is a suitable material for electrochromic devices.     

Effects of a magnetic field on chaos for low Prandtl number convection in porous media

The effects of a magnetic field on the route to chaos in a fluid-saturated porous layer were investigated based on the approach of dynamical systems. A low dimensional Lorenz-like model was obtained using Galerkin truncated approximation. The presence of a magnetic field helped delay the convective motion. The transition from steady convection to chaos via a Hopf bifurcation produced a limit cycle which may be associated with a homoclinic explosion at a slightly subcritical value of the Rayleigh number.     

Environmental impact assessment of post illegal mining activities in Chini Lake with regards to natural radionuclides and heavy metals in water and sediment

Journal of Radioanalytical and Nuclear Chemistry - Comprehensive radiological survey and evaluation of heavy metal contamination were conducted in Chini Lake, which has been awarded a pristine...     

Models of the iron-only hydrogenase: Reactions of [Fe2(CO)6(μ-pdt)] with small bite-angle diphosphines yielding bridge and chelate diphosphine complexes [Fe2(CO)4(diphosphine)(μ-pdt)]

Reactions of [Fe₂(CO)₆(μ-pdt)] (1) (pdt = SCH₂CH₂CH₂S) and small bite-angle diphosphines have been studied. A range of products can be formed being dependent upon the nature of the diphosphine and reaction conditions. With bis(diphenylphosphino)methane (dppm), thermolysis in toluene leads to the formation of a mixture of bridge and chelate isomers [Fe₂(CO)₄(μ-dppm)(μ-pdt)] (2) and [Fe₂(CO)₄(κ²-dppm)(μ-pdt)] (3), respectively. Both have been crystallographically characterised, 3 being a rare example of a chelating dppm ligand in a first row binuclear system. At room temperature in MeCN with added Me₃NO · 2H₂O, the monodentate complex [Fe₂(CO)₅(κ¹-dppm)(μ-pdt)] (4) is initially formed. Warming 4 to 100 °C leads the slow conversion to 2, while oxidation (on alumina) gives [Fe₂(CO)₅(κ¹-dppmO)(μ-pdt)] (5). With bis(dicyclohexylphosphino)methane (dcpm), heating in toluene cleanly affords [Fe₂(CO)₄(μ-dcpm)(μ-pdt)] (6). With Me₃NO · 2H₂O in MeCN the reaction is not clean as the phosphine is oxidised but monodentate [Fe₂(CO)₅(κ¹-dcpm)(μ-pdt)] (7) can be seen spectroscopically. With 1,2-bis(diphenylphosphino)benzene (dppb) and cis-1,2-bis(diphenylphosphino)ethene (dppv) the chelate complexes [Fe₂(CO)₄(κ²-dppb)(μ-pdt)] (8) and [Fe₂(CO)₄(κ²-dppv)(μ-pdt)] (9), respectively are the final products under all conditions, although a small amount of [Fe₂(CO)₅(κ²-dppvO)(μ-pdt)] (10) was also isolated. Protonation of 2 with HBF₄ affords a cation with poor stability while with the more basic diiron centre in 6 readily forms the stable bridging-hydride complex [(μ-H)Fe₂(CO)₄(μ-dcpm)(μ-pdt)][BF₄] (11) which has been crystallographically characterised.     

Models of the iron-only hydrogenase: structural studies of chelating diphosphine complexes [Fe2(CO)4(micro-pdt)(kappa2P,P'-diphosphine)

Six chelating diphosphine complexes, [Fe2(CO)4(micro-pdt)(kappa2P,P'-diphosphine)], have been crystallographically characterised allowing differences between basal-apical and dibasal conformations to be analysed.     

Proteome profile of zebrafish caudal fin based on one-dimensional gel electrophoresis LCMS/MS and two-dimensional gel electrophoresis MALDI MS/MS analysis

Zebrafish (Danio rerio) is the widely used vertebrate model animal for understanding the complexity of development and disease process. Zebrafish has been also extensively used in understanding the mechanism of regeneration for its extensive capability of regenerating fins and other tissues. We have analyzed the proteome profile of zebrafish caudal fin in its native state based on one-dimensional gel electrophoresis LCMS/MS and two-dimensional gel electrophoresis MS/MS analyses. A total of 417 proteins were identified as zebrafish fin tissue specific, which includes 397 proteins identified based on one-dimensional gel electrophoresis LCMS/MS analysis and 101 proteins identified based on two-dimensional gel electrophoresis MALDI MS/MS. The proteins mapped to the zebrafish fin tissue were shown to be involved in various biological activities related to development, apoptosis, signaling and metabolic process. Focal adhesion, regulation of actin cytoskeleton, cancer-related pathways, mitogen-activated protein kinase signaling, antigen processing and presentation, and proteasome are some of the important pathways associated with the identified proteome data set of the zebrafish fin.     

N-halamine biocidal coatings via a layer-by-layer assembly technique

Two N-halamine copolymer precursors, poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-acrylic acid potassium salt) and poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-trimethyl-2-methacryloxyethylammonium chloride) have been synthesized and successfully coated onto cotton fabric via a layer-by-layer (LbL) assembly technique. A multilayer thin film was deposited onto the fiber surfaces by alternative exposure to polyelectrolyte solutions. The coating was rendered biocidal by a dilute household bleach treatment. The biocidal efficacies of tested swatches composed of treated fibers were evaluated against Staphylococcus aureus and Escherichia coli. It was determined that chlorinated samples inactivated both S. aureus and E. coli O157:H7 within 15 min of contact time, whereas the unchlorinated control samples did not exhibit significant biocidal activities. Stabilities of the coatings toward washing and ultraviolet light exposure have also been studied. It was found that the stability toward washing was superior, whereas the UVA light stability was moderate compared to previously studied N-halamine moieties. The layer-by-layer assembly technique can be used to attach N-halamine precursor polymers onto cellulose surfaces without using covalently bonding tethering groups which limit the structure designs. In addition, ionic precursors are very soluble in water, thus promising for biocidal coatings without the use of organic solvents.     

Graphene-encapsulated Fe3O4 nanoparticles with 3D laminated structure as superior anode in lithium ion batteries

Fe₃O₄–graphene composites with three‐dimensional laminated structures have been synthesised by a simple in situ hydrothermal method. From field‐emission and transmission electron microscopy results, the Fe₃O₄ nanoparticles, around 3–15 nm in size, are highly encapsulated in a graphene nanosheet matrix. The reversible Li‐cycling properties of Fe₃O₄–graphene have been evaluated by galvanostatic discharge–charge cycling, cyclic voltammetry and impedance spectroscopy. Results show that the Fe₃O₄–graphene nanocomposite with a graphene content of 38.0 wt % exhibits a stable capacity of about 650 mAh g^?1 with no noticeable fading for up to 100 cycles in the voltage range of 0.0–3.0 V. The superior performance of Fe₃O₄–graphene is clearly established by comparison of the results with those from bare Fe₃O₄. The graphene nanosheets in the composite materials could act not only as lithium storage active materials, but also as an electronically conductive matrix to improve the electrochemical performance of Fe₃O₄.