A Theoretical study on the charge and discharge states of Na-ion battery cathode material,Na1+xFePO4F

Na₂FePO₄F is a promising cathode material for a Na-ion battery because of its high electronic capacity and good cycle performance. In this work, first principle calculations combined with cluster expansion and the Monte Carlo method have been applied to analyze the charge and discharge processes of Na₂FePO₄F by examining the voltage curve and the phase diagram. As a result of the density functional theory calculation and experimental verification with structural analysis, we found that the most stable structure of Na_1.5FePO₄F has the P2₁/b11 space group, which has not been reported to date. The estimated voltage curve has two clear plateaus caused by the two-phase structure composed of P2₁/b11 Na_1.5FePO₄F and Pbcn Na₂FePO₄F or Na₁FePO₄F and separated along the c-axis direction. The phase diagram shows the stability of the phase-separated structure. Considering that Na₂FePO₄F has diffusion paths in the a- and c-axis directions, Na₂FePO₄F has both innerphase and interphase diffusion paths. We suggest that the stable two-phase structure and the diffusion paths to both the innerphase and interphases are a key for the very clear plateau. We challenge to simulate a nonequilibrium state at high rate discharge with high temperature by introducing a coordinate-dependent chemical potential. The simulation shows agreement with the experimental discharge curve on the disappearance of the two plateaus. © 2018 Wiley Periodicals, Inc.     

Potential energy surfaces and nonadiabatic transitions in the asymptotic regions of ICN photodissociation to study the interference effects in the F1 and F2 spin-rotation levels of the CN products

One of the most spectacular yet unsolved problems for the ICN -band photodissociation is the non-statistical spin-rotation F₁ = N + 1/2 and F₂ = N − 1/2 populations for each rotation level N of the CN fragment. The F₁/F₂ population difference function f(N) exhibits strong N and λ dependences with an oscillatory behavior. Such details were found to critically depend on the number of open-channel product states, namely, whether both I (²P_3/2) and I (²P_1/2) are energetically available or not as the dissociation partner. First, in the asymptotic region, the exchange and dipole-quadrupole inter-fragment interactions were studied in detail. Then, as the diabatic basis, we took the appropriate symmetry adapted products of the electronic and rotational wavefunctions for the F₁ and F₂ levels at the dissociation limits. We found that the adiabatic Hamiltonian exhibits Rosen–Zener–Demkov type nonadiabatic transitions reflecting the switch between the exchange interaction and the small but finite spin-rotation interaction within CN at the asymptotic region. This non-crossing type nonadiabatic transition occurs with the probability 1/2, that is, at the diabatic limit through a sudden switch of the quantization axis for CN spin S from the dissociation axis to the CN rotation axis N . We have derived semiclassical formulae for f(N) and the orientation parameters with a two-state model including the 3A′ and 4A′ electronic states, and with a four-state model including the 3A′ through 6A′ electronic states. These two kinds of interfering models explain general features of the F₁ and F₂ level populations observed by Zare's group and Hall's group, respectively. © 2018 Wiley Periodicals, Inc.     

Structural confirmation of oligosaccharides newly isolated from sugar beet molasses

ABSTRACT: BACKGROUND: Sugar beet molasses is a viscous by-product of the processing of sugar beets into sugar. The molasses is known to contain sucrose and raffinose, a typical trisaccharide, with a well-established structure. Although sugar beet molasses contains various other oligosaccharides as well, the structures of those oligosaccharides have not been examined in detail. The purpose of this study was isolation and structural confirmation of these other oligosaccharides found in sugar beet molasses. RESULTS: Four oligosaccharides were newly isolated from sugar beet molasses using high-performance liquid chromatography (HPLC) and carbon-Celite column chromatography. Structural confirmation of the saccharides was provided by methylation analysis, matrix-assisted laser desorption/ionaization time of flight mass spectrometry (MALDI-TOF-MS), and nuclear magnetic resonance (NMR) measurements. CONCLUSION: The following oligosaccharides were identified in sugar beet molasses: beta-D-galactopyranosyl-(1- > 6)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named beta-planteose), alpha-D-galactopyranosyl-(1- > 1)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named1-planteose), alpha-D-glucopyranosyl-(1- > 6)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (theanderose), and beta-D-glucopyranosyl-(1- > 3)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (laminaribiofructose). 1-planteose and laminaribiofructose were isolated from natural sources for the first time.     

Thermally stable polymer composites with improved transparency by using colloidal mesoporous silica nanoparticles as inorganic fillers

The colloidal mesoporous silica nanoparticles with small particle sizes (namely, CMS) are used as inorganic fillers of polymers (i.e. epoxy and silicone). From simple calculation, almost all polymers are estimated to be confined in the mesopores. To clarify the superiority of CMS over nonporous silica particles and mesoporous silica particles with much larger size (TMPS-4) as inorganic fillers, a systematic study on mechanical strength and transparency of polymer-silica nanocomposites was conducted. Compared with nonporous silica particles, similar to TMPS-4, CMS shows a greater effect on lowering the CTE. In addition, obtained polymer-CMS nanocomposites show improved transparency than polymer-TMPS-4 nanocomposites.     

Preparation of alkyl-modified silicon nanosheets by hydrosilylation of layered polysilane (Si6H6)

Alkyl-modified crystalline silicon nanosheets 2 were synthesized and maintained the crystal structure of a Si(111) plane, in which the dangling silicon bond is stabilized by capping with the alkyl group. 2 was characterized using UV-vis, Fourier transform-infrared, and X-ray photoelectron spectroscopies; X-ray diffraction; and X-ray absorption near edge structure analysis. A model structure is proposed that has a periodicity through the nanosheet surface.     

Strong and selective binding of amiloride to an abasic site in RNA duplexes: thermodynamic characterization and microRNA detection

Firmly tied: The binding affinity of amiloride for an abasic (AP) site-containing RNA duplex is two orders of magnitude superior to the affinity of the corresponding AP site-containing DNA duplex. The observed high binding affinity for the RNA duplex arises from a favorable enthalpy gain. The binding-induced fluorescence response of amiloride is applicable to microRNA detection.     

Hydrothermal and solid-state transformation of ruthenium-supported Keggin-type heteropolytungstates [XW11O39{Ru(II)(benzene)(H2O)}]n- (X = P (n = 5), Si (n = 6), Ge (n = 6)) to ruthenium-substituted Keggin-type heteropolytungstates

A new pathway for the preparation of mono-ruthenium (Ru)(iii)-substituted Keggin-type heteropolytungstates with an aqua ligand, [PW(11)O(39)Ru(iii)(H(2)O)](4-) (1a), [SiW(11)O(39)Ru(iii)(H(2)O)](5-) (1b) and [GeW(11)O(39)Ru(iii)(H(2)O)](5-) (1c), using [Ru(ii)(benzene)Cl(2)](2) as a Ru source was described. Compounds 1a-1c were prepared by reacting [XW(11)O(39)](n-) (X = P, Si and Ge) with [Ru(ii)(benzene)Cl(2)](2) under hydrothermal condition and were isolated as caesium salts. Ru(benzene)-supported heteropolytungstates, [PW(11)O(39){Ru(ii)(benzene)(H(2)O)}](5-) (2a), [SiW(11)O(39){Ru(ii)(benzene)(H(2)O)}](6-) (2b) and [GeW(11)O(39){Ru(ii)(benzene)(H(2)O)}](6-) (2c), were first produced in the reaction media, and then transformed to 1a, 1b and 1c, respectively, under hydrothermal conditions. Calcination of Ru(benzene)-supported heteropolytungstates, 2a, 2b and 2c, in the solid state produced mixtures of 1a, 1b and 1c with CO (carbon monoxide)-coordinated complexes, [PW(11)O(39)Ru(ii)(CO)](5-) (4a), [SiW(11)O(39)Ru(ii)(CO)](6-) (4b) and [GeW(11)O(39)Ru(ii)(CO)](6-) (4c), respectively. From comparison of their catalytic activities in water oxidation reaction, it was indicated that ruthenium should be incorporated in the heteropolytungstate in order to promote catalytic activity.     

Fluorescence imaging of potassium ions in living cells using a fluorescent probe based on a thrombin binding aptamer-peptide conjugate

When a biotinylated FRET probe based on a peptide-thrombin binding aptamer conjugate was introduced together with streptavidin and biotinylated nuclear export signal peptide into HeLa cells, the resulting ternary complex enabled visualization of K(+) concentration changes in the cell.     

Self-oscillation of polymer chains induced by the Belousov-Zhabotinsky reaction under acid-free conditions

A novel self-oscillating polymer was prepared by utilizing the Belousov-Zhabotinsky (BZ) reaction. In this study, a sulfonic acid group was newly introduced as a pH-control site into the copolymer of N-isopropylacrylamide, and the ruthenium complex was introduced as a catalyst site. By introducing the pH-control site, we succeed in causing the soluble-insoluble self-oscillation of the polymer solution under acid-free conditions in which only two BZ substrates, malonic acid and sodium bromate, were present as added agents. The self-oscillating behavior was remarkably influenced by the temperature and polymer concentration, which reflects the intermolecular aggregative capacity of the polymer chains in the reduced state to change the lower critical solution temperature. This achievement of self-oscillation of polymer chains under acid-free conditions may lead to their practical use as novel biomimetic materials under biological conditions.     

Preparation of Sr2CeO4:Eu3+,Dy3+ white luminescence phosphor particles and thin films by using an emulsion liquid membrane system

Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) phosphor particles and thin films were prepared by using an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system, containing VA-10 (2-methyl-2-ethylheptanoic acid) as extractant (cation carrier). A two-step extraction enabled efficient extraction for Sr(3+) and rare earth ions, and the resulting precursor metal oxalate particles produced in the internal water phase of the ELM system were about 60 nm in diameter. Calcination of the oxalate particles in air gave submicrometer-sized Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) particles, which showed blue and white luminescence, respectively, by UV excitation. Blue and white luminescence phosphor thin films were also prepared by soaking alumina substrates into the W/O emulsion containing precursor oxalate particles, followed by calcination in air.