A Practical See-Through Head Mounted Display Using a Holographic Optical Element

This paper describes a practical method for design and fabrication of holographic optical elements (HOEs) as off-axis imaging optics. The authors have designed and fabricated a compact glass-like and see-through display using HOE and a total internal reflection prism. Observers can see through the display because wavelength selectivity of the HOE provides high transparency. Wave front of the HOE is designed by commercial software, though the actual fabrication method is not provided. The authors propose a practical method to fabricate HOEs, which can be applied to a wide range of imaging optics.This paper was originally presented at the 2nd International Conference on Optical Design and Fabrication, ODF2000 which was held on November 15–17, 2000 at the International Conference Center, Tokyo, Waseda University, Japan.     

Comprehensive synthesis of ER related high-mannose-type sugar chains by convergent strategy

Systematic synthesis of high-mannose-type sugar chains of asparagine-linked glycoproteins is described. To construct the target sugar chains, we employed the convergent route, using three oligosaccharide components, the common hexasaccharide, branched tri-, tetra- and pentasaccharides, and mono-, di-, and triglucosyl fragments. Construction of the β-mannoside linkage was performed using p-methoxybenzyl-assisted intramolecular aglycon delivery. The hexasaccharide fragment was coupled with the branched mannooligosaccharide donors such as M5, M4B, M4C, and M3 to give undecasaccharide (M9), decasaccharide (M8B and M8C), and nonasaccharide (M7), respectively. Incorporation of mono-, di-, and triglucosyl fragments toward them gave tetradecasaccharide (G3M9), tridecasaccharide (G2M9), dodecasaccharide (G1M9), undecasaccharide (G1M8B and G1M8C), and decasaccharide (G1M7), respectively.     

Improving Data Quality in Traditional Low-Dose Scanning Transmission Electron Microscopy Imaging

It has become very important to study and find optimal conditions for imaging electron-beam (e-beam) sensitive materials in scanning transmission electron microscopy under low electron-dose with high signal-to-noise ratio (SNR). Convergence and collection angles and electron-probe current are essential parameters. However, these parameters have rarely been discussed in a systematic way. In this paper, the illumination and collection conditions are optimized according to the resolution requirement of different materials by adjusting the condenser and intermediate lenses in a commercial transmission electron microscope. To demonstrate the significance of optimizing these parameters, two examples, zeolite MFI and metal–organic framework (MOF) MIL-101, are taken among the sensitive materials, with the most important electron incidences along the [010] and <110> directions, respectively. High SNR atomic resolution images of MFI are obtained with e-beam current as low as 0.50 pA, reaching information transfer for reflection up to 18 0 2 corresponding to d-spacing of 0.11 nm, close to the resolution limit of 0.098 nm from resolvable diffraction limit. MOF MIL-101 is characterized under an even lower e-beam 0.2 pA to avoid severe beam damage. High-quality annular dark and bright field images are obtained, which proves the wide applicability of this method on more e-beam sensitive materials.     

A novel approach for LC-MS/MS-based chiral metabolomics fingerprinting and chiral metabolomics extraction using a pair of enantiomers of chiral derivatization reagents

Chiral metabolites are found in a wide variety of living organisms and some of them are understood to be physiologically active compounds and biomarkers. However, the overall analysis of chiral metabolomics is quite difficult due to the high number of metabolites, the significant diversity in their physicochemical properties, and concentration range from metabolite-to-metabolite. To solve this difficulty, we developed a novel approach for chiral metabolomics fingerprinting and chiral metabolomics extraction, which is based on the labeling of a pair of enantiomers of chiral derivatization reagents (i.e., DMT-(S,R)-Pro-OSu and DMT-3(S,R)-Apy) and precursor ion scan chromatography of the derivatives. The multivariate statistics is also required for this strategy. The proposed procedures were evaluated by the detection of a diagnostic marker (i.e., d-lactic acid) using the saliva of diabetic patients. This method was used for the determination of biomarker candidates of chiral amines and carboxyls in Alzheimer's disease (AD) brain homogenates. As the results, l-phenylalanine (L-Phe) and l-lactic acid (L-LA) were identified as the decreased and increased biomarker candidates in the AD brain, respectively. Therefore, the proposed approach seems to be helpful for the determination of non-target chiral metabolomics possessing amines and carboxyls.     

A C3‐Symmetric Macrocycle‐Based,Hydrogen‐Bonded,Multiporous Hexagonal Network as a Motif of Porous Molecular Crystals

A C₃‐symmetric π‐conjugated macrocycle combined with an appropriate hydrogen bonding module (phenylene triangle) allowed the construction of crystalline supramolecular frameworks with a cavity volume of up to 58 %. The frameworks were obtained through non‐interpenetrated stacking of a hexagonal sheet possessing three kinds of pores with different sizes and shapes. The activated porous material absorbed CO₂ up to 96 cm³ g⁻¹ at 195 K under 1 atm.     

The porosity, acidity, and reactivity of dealuminated zeolite ZSM-5 at the single particle level: the influence of the zeolite architecture

A combination of atomic force microscopy (AFM), high‐resolution scanning electron microscopy (HR‐SEM), focused‐ion‐beam scanning electron microscopy (FIB‐SEM), X‐ray photoelectron spectroscopy (XPS), confocal fluorescence microscopy (CFM), and UV/Vis and synchrotron‐based IR microspectroscopy was used to investigate the dealumination processes of zeolite ZSM‐5 at the individual crystal level. It was shown that steaming has a significant impact on the porosity, acidity, and reactivity of the zeolite materials. The catalytic performance, tested by the styrene oligomerization and methanol‐to‐olefin reactions, led to the conclusion that mild steaming conditions resulted in greatly enhanced acidity and reactivity of dealuminated zeolite ZSM‐5. Interestingly, only residual surface mesoporosity was generated in the mildly steamed ZSM‐5 zeolite, leading to rapid crystal coloration and coking upon catalytic testing and indicating an enhanced deactivation of the zeolites. In contrast, harsh steaming conditions generated 5–50 nm mesopores, extensively improving the accessibility of the zeolites. However, severe dealumination decreased the strength of the Brønsted acid sites, causing a depletion of the overall acidity, which resulted in a major drop in catalytic activity.     

Shape- and size-controlled synthesis in hard templates: sophisticated chemical reduction for mesoporous monocrystalline platinum nanoparticles

Here we report a novel hard-templating strategy for the synthesis of mesoporous monocrystalline Pt nanoparticles (NPs) with uniform shapes and sizes. Mesoporous Pt NPs were successfully prepared through controlled chemical reduction using ascorbic acid by employing 3D bicontinuous mesoporous silica (KIT-6) and 2D mesoporous silica (SBA-15) as a hard template. The particle size could be controlled by changing the reduction time. Interestingly, the Pt replicas prepared from KIT-6 showed polyhedral morphology. The single crystallinity of the Pt fcc structure coherently extended over the whole particle.     

Rapid determination of fumagillin residues in honey by liquid chromatography-tandem mass spectrometry using the QuEChERS method

A new, rapid, and efficient method for determining the fumagillin residues in honey was developed. The samples extracted were analyzed using LC/MS/MS. Chromatographic separation of fumagillin was performed in gradient mode on a C8 column (100 x 2.0 mm, 5 microm) at 40 degrees C. The mobile phase consisted of a mixture of 2 mM ammonium formate-0.01% formic acid solution and methanol; the flow rate was set to 0.2 mL/min. Under these conditions, it was possible to measure fumagillin and its isomers as a single peak. The sample preparation procedure used is based on the QuEChERS (quick, easy, cheap, effective, rugged, and safe) method, which is fast (approximately 30 min) and uses less organic solvent. The fumagillin was extracted with acetonitrile containing 0.1% formic acid, then purified using a solid-phase extraction method with an Oasis mixed-mode weak anion-exchange cartridge. The overall recovery of fumagillin ranged from 88.1 to 99.4%; the intra- and interassay CVs were <4.5% and <4.9%, respectively. The LOQ was 0.1 microg/kg. LC/MS/MS coupled with the QuEChERS method showed strong potential as a method for determining fumagillin residues in honey.     

A novel hydrazide type organocatalyst for enantioselective Diels-Alder reactions

The development of a new class of hydrazide type organocatalyst, (4R,5R)-1,3-bis(isopropylamino)-4,5-dihenylimidazolidin-2-one 2a, for enantioselective Diels-Alder reactions between cyclopentadiene and α,β-unsaturated aldehydes are presented. The new organocatalyst 2a promoted the reaction, affording Diels-Alder adducts in good yields with good levels of enantioselectivity.