Motion of redox molecules in solution monitored by the highly-sensitive EQCM technique

The behavior of redox molecules in solution that was not detected by electrochemical techniques was measured by a highly-sensitive electrochemical quartz crystal microbalance (EQCM) technique that has been improved in this study to obtain a high sensitivity of EQCM measurement in solution. The improved EQCM technique allowed to monitor the motion of a redox molecule, that is an access of the molecule to an electrode surface and repulsion from the surface during redox. An EQCM technique currently in use has measured adsorption of redox molecules on an electrode surface or polymerization on the surface caused by a chemical reaction following redox, which exhibits an enough large mass change response to detect with an EQCM measurement. However, access and repulsion of redox molecule, which is a slight motion of the molecule near on electrode surface, has not been detected and investigated by an EQCM technique, because the mass change response seems to be very small. In this study, the redox behavior of methyl viologen on a bare gold surface, pyridinethiol surface and methylpyridinethiol surface was investigated. Although the three electrodes give the same cyclic voltammogram of methyl viologen, the three are different in QCM response recorded at the same time as the voltammetry. Access/repulsion of methyl viologen within an electrical double layer was monitored by the highly-sensitive EQCM technique.     

Combinatorial synthesis of MUC1 glycopeptides: polymer blotting facilitates chemical and enzymatic synthesis of highly complicated mucin glycopeptides

The chemoselective polymer blotting method allows for rapid and efficient synthesis of glycopeptides based on a "catch and release" strategy between solid-phase and water-soluble polymer supports. We have developed a heterobifunctional linker sensitive to glutamic acid specific protease (BLase). The general procedure consists of five steps, namely (i) the solid-phase synthesis of glycopeptide containing BLase sensitive linker, (ii) subsequent deprotections and the release of the glycopeptide from the resin, (iii) chemoselective blotting of the glycopeptide intermediates in the presence of water-soluble polymers with oxylamino functional groups, (iv) sugar elongations using glycosyltransferases, and (v) the release of target glycopeptides from the polymer platform by selective BLase promoted hydrolysis. The combined use of the solid-phase chemical syntheses of peptides and the enzymatic syntheses of carbohydrates on water-soluble polymers would greatly contribute to the production of complicated glycopeptide libraries, thereby enhancing applicative research. We report here a high-throughput synthetic system for the various types of MUC1 glycopeptides exhibiting a variety of sugar moieties. It is our belief that this concept will become part of the entrenched repertoire for the synthesis of biologically important glycopeptides on the basis of glycosyltransferase reactions in automated and combinatorial syntheses.     

Synthesis and properties of polydiene and polypentenamer having formyl or hydroxymethyl groups and their photosensitive derivatives

cis-1,4-Polybutadiene and polypentenamer having pendant functional groups such as formyl, aldoxime, hydroxymethyl, or cinnamoyloxymethyl groups have been prepared, and some of their properties were investigated in terms of structural effect on physical properties of these polymers. cis-1, 4-Polybutadiene and polypentenamer having a different content of formyl group were prepared by the hydroformylation reaction with rhodium catalyst under mild conditions. The pendant formyl group was reduced to a hydroxymethyl group by using various reducing agents such as sodium borohydride or sodium trimethoxyborohydride which were effective to avoid a crosslinking reaction among the formyl groups. Glass transition temperature of polypentenamer having hydroxymethyl groups increased with increasing the content of the hydroxymethyl groups in the polymer. Cinnamoyl group was introduced into the polypentenamer having hydroxymethyl groups by reacting with cinnamoyl chloride so as to prepare a photosensitive rubber. The relationships between the photosensitivity of the cinnamoylated polypentenamer and the mobility of polymer main chains have been elucidated. A linear relationship between the photodimerization rate constant and the difference between ultraviolet (UV) irradiation temperature and the glass transition temperature of the polymer was found. It has become apparent that the photosensitivity of cinnamoylated polypentenamer can be estimated by the glass transition temperature of the original polymer, UV irradiation temperature, activation energy of the dimerization, and γ, which is a coefficient of the relationship between the photosensitive group concentration and the glass transition temperature of the polymer.     

Effects of quaternary ammonium bases on valence-saturated but coordination-unsaturated chelates: Part IV. Extraction of some divalent metal 8-hydroxyquinolinates

The effect of zephiramine on the chelate formation and extraction of some divalent metals with oxine is reported. In the presence of zephiramine, the non-extractable 1:2 zinc— and cadmium—oxine chelates as well as the extractable 1:2 nickel— and manganese—oxine chelates become highly coordinated ternary complexes, M(Q)₃ (zeph), which are easily extracted into 1,2-dichloroethane. Copper is easily extracted into 1,2-dichloroethane as Cu(Q)₂, which is not affected by zephiramine.     

Effect of explicit cationic size and valence constraints on the phase stability of 1:2 B-site-ordered perovskite ruthenates

The related parameters of cation size and valence that control the crystallization of Sr(3)CaRu(2)O(9) into a 1:2 B-site-ordered perovskite structure were explored by cationic substitution at the strontium and calcium sites and by the application of high pressure. At ambient pressures, Sr(3)MRu(2)O(9) stoichiometries yield multiphasic mixtures for M = Ni(2+), Mg(2+), and Y(3+), whereas pseudocubic perovskites result for M = Cu(2+) and Zn(2+). For A-site substitutions, an ordered perovskite structure results for Sr(3-x)Ca(x)CaRu(2)O(9), with 0 相似文献   

Photo-initiated base-formation in a polymer matrix

It was found that amines were formed efficiently by the photolysis of O-acyloximes followed by hydrolysis in polystyrene films and the relationship between structures of O-acyloximes and yields of amines were investigated. O-phenylacetyl acetophenone oxime (PaApO), O-pivaloyl acetophenone oxime (PApO), and O-benzoyl acetophenone oxime (BApO) as monofunctional O-acyloximes and O,O′-succinyl diacetophenone oxime (SDApO) and O,O′-glutaryl diacetophenone oxime (GDApO) as bifunctional O-acyloximes were examined. The yields of amines for PaApO and SDApO under N₂ were ca. 70%, which was the highest among O-acyloximes examined in this experiment. On the other hand, the yields for PApO, BApO, and GDApO were less than 15% and it was verified that the hydrogen abstraction by imino radicals via 6-membered cyclic intermediates resulted in the lowering of yields. Although the effect of oxygen under photolysis on the yields of amine for PaApO was negligible under 50% conversion of PaApO, the yield decreased with further increase in the conversion and was 50% at 90% conversion. © 1994 John Wiley & Sons, Inc.     

Palladium-catalyzed oxidation of alcohols via their allyl carbonates under neutral conditions

Treatment of alkyl allyl carbonates derived from various alcohols with a palladium catalyst in MeCN affords ketones and aldehydes in high yields. This new method of oxidation of alcohols can be applied to various alcohols except simple primary alcohols.     

Vinyl polymerization. CCCXXXIX. Effect of chain length of nylon 3 on the polymerization of methyl methacrylate initiated with the system of nylon 3, copper(II) ion,and water

It was found recently that the system of nylon 3, copper(II) ion, and water could initiate a radical polymerization of methyl methacrylate(MMA). In the present paper, the effect of average chain length of the molecules of nylon 3 on the rate of polymerization of MMA was studied. The rate increased with the chain length of nylon 3. This result was explained well by the fact that the shorter nylon 3 forms a complex with copper (II) ion more easily than longer nylon 3. It was assumed that the shorter nylon 3 fills three or four coordination sites of copper(II) ion and loses the ability to initiate the polymerization. The efficiency of grafting of MMA and the degree of polymerization of MMA homopolymer were independent of the chain length of nylon 3.     

Systematic enantiomeric separation of [60]fullerene bisadducts possessing an inherent chiral addition pattern

The optical resolution of trans-2 and trans-3 [60]fullerene bisadducts with an inherent chiral addition pattern, modified by Bingel reaction, cycloaddition by benzyne, Prato reaction, and cycloaddition by o-quinodimethane, was systematically investigated by using chiral HPLC columns (Chiralcel OD and Chiralpak AD). The chiroptical properties of enantiomers separated were also examined.     

Conversion of ammonia to dinitrogen in wastewater by Nitrosomonas europaea

Because Nitrosomonas europaea contains ammonia-oxidizing enzyme, nitrite reductase, and nitrous oxide reductase, the conversion of ammonia to dinitrogen was tried with different reaction conditions. In aerobic reaction conditions, ammonium was converted to nitrite (NO ₂ ⁻ ), while under oxygen-limiting or oxygen-free conditions, NO ₂ ⁻ -N formed from ammonia oxidation by N. europaea was reduced to N₂O and dinitrogen with 22% conversion. During denitrification, optimal pH for the production of N₂O and dinitrogen was found to be 7.0–8.0. Dinitrogen was not produced in acidic pH<7.0. A low partial oxygen pressure as well as oxygen-free conditions are favorable for high production of dinitrogen.