Amplitude modulation of submillimeter wave gyrotron output

Amplitude modulation of gyrotron by a small modulation of the anode voltage is calculated using an energy transfer formula. Experimental measurements using a submillimeter wave gyrotron are in good agreement. One hundred percent modulation of the output at frequencies up to several hundred kilohertz has been achieved with anode modulation levels of only a few percent. Numerical calculations lend further support to the experimental results.     

Investigation of the influence of cell density of human fibroblasts cryopreserved inside collagen sponges at various cooling rates

The influence of cell density of cells cryopreserved inside a collagen matrix at various cooling rates was investigated. Human fibroblasts were three-dimensionally cultured for 2 days in a collagen sponge (20 mm in diameter and 1 mm in thickness) as an extracellular matrix to imitate biological tissue (artificial tissue). Different cell densities for the artificial tissue were used, from 10(5) to 10(7) cells/cm(3). Four artificial tissues were first stacked in a test chamber, frozen at a cooling rate of 0.3 to 50 degrees C/min in a solution of Dulbecco's Modified Eagle Medium, 20% fetal bovine serum and 10% dimethylsulfoxide, kept frozen below -185 degrees C for 2 hours, and then finally thawed. Membrane integrity of fibroblasts using a trypan blue exclusion assay was evaluated as an index for post-thaw cellular viability. Results show that with increasing cell density, the post-thaw membrane integrity decreased. Therefore, in the cryopreservation of biological tissue, it seems high cell density is one factor which causes a decline in viability.     

Rapid and Efficient Copper‐Catalyzed Finkelstein Reaction of (Hetero)Aromatics under Continuous‐Flow Conditions

A general, rapid, and efficient method for the copper‐catalyzed Finkelstein reaction of (hetero)aromatics has been developed using continuous flow to generate a variety of aryl iodides. The described method can tolerate a broad spectrum of functional groups, including N‐H and O‐H groups. Additionally, in lieu of isolation, the aryl iodide solutions were used in two distinct multistep continuous‐flow processes (amidation and Mg–I exchange/nucleophilic addition) to demonstrate the flexibility of this method.     

Air/water two-phase flow test tunnel for airfoil studies

A test tunnel for the study of airfoil performances under air/water two-phase flow condition has been designed and constructed. This facility will serve for a better understanding of the flow phenomena and characteristics of hydraulic machinery under gas/ liquid two-phase flow operating conditions. At the test section of the tunnel, a two-dimensional isolated airfoil or a cascade of airfoils is installed in a two-phase inlet flow with a uniform velocity (up to 10 m/s) and void fraction (up to 12%) distribution. The details of the tunnel structure and the measuring systems are described and the basic characteristics of the constructed tunnel are also given. As an example of the test results, void fraction distribution around a test airfoil is shown.Dedicated to the 60th Birthday of Professor Klaus Gersten     

3D interconnected ionic nano-channels formed in polymer films: self-organization and polymerization of thermotropic bicontinuous cubic liquid crystals

Thermotropic bicontinuous cubic (Cub(bi)) liquid-crystalline (LC) compounds based on a polymerizable ammonium moiety complexed with a lithium salt have been designed to obtain lithium ion-conductive all solid polymeric films having 3D interconnected ionic channels. The monomer shows a Cub(bi) phase from -5 to 19 °C on heating. The complexes retain the ability to form the Cub(bi) LC phase. They also form hexagonal columnar (Col(h)) LC phases at temperatures higher than those of the Cub(bi) phases. The complex of the monomer and LiBF(4) at the molar ratio of 4:1 exhibits the Cub(bi) and Col(h) phases between -6 to 19 °C and 19 to 56 °C, respectively, on heating. The Cub(bi) LC structure formed by the complex has been successfully preserved by in situ photopolymerization through UV irradiation in the presence of a photoinitiator. The resultant nanostructured film is optically transparent and free-standing. The X-ray analysis of the film confirms the preservation of the self-assembled nanostructure. The polymer film with the Cub(bi) LC nanostructure exhibits higher ionic conductivities than the polymer films obtained by photopolymerization of the complex in the Col(h) and isotropic phases. It is found that the 3D interconnected ionic channels derived from the Cub(bi) phase function as efficient ion-conductive pathways.     

Synthesis of L-epi-capreomycidine derivatives via C-H amination

The L-epi-capreomycidine (Cpm) derivatives were efficiently and stereoselectively synthesized via nitrene C-H insertion starting from a readily available D-Tyr. Design of a substrate that takes into account hydrogen bonding is a critical feature in order to achieve high selectivity. Our synthetic strategy could be a new access to epi-Cpm and its derivatives, which are found in several biologically active natural products.     

Development of the carboxamide protecting group, 4-(tert-butyldimethylsiloxy)-2-methoxybenzyl

The new carboxamide protecting group, 4-(tert-butyldimethylsiloxy)-2-methoxybenzyl (SiMB), has been developed. While this SiMB group can be removed using mild basic desilylation methods, it can also be deprotected under strongly acidic or oxidative conditions. An application of this group to simple carboxamide groups, as well as to more complex and acid-sensitive adenosine derivatives containing a cyclophane scaffold, was also demonstrated.