Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.     

The uses of 1-(2-pyridylazo) 2-naphtol (PAN) impregnated Ambersorb 563 resin on the solid phase extraction of traces heavy metal ions and their determinations by atomic absorption spectrometry

1-(2-pyridylazo) 2-naphtol (PAN) impregnated Ambersorb 563 resin was used as solid phase extractor of copper, nickel, cadmium, lead, chromium and cobalt ions in aqueous solutions prior to their atomic absorption spectrometric determinations. The parameters including pH, sample volume, matrix effects were also investigated. The relative standard deviation (R.S.D.) of the combined method of sample treatment, preconcentration and determination with atomic absorption spectrometry is generally lower than 10%. The limit of detection was between 0.21 and 1.4 μg l⁻¹. The results were used for preconcentration of analyte ions from natural water samples. The method was also applied to a stream sediment standard reference material (GBW7309) for the determination of Cu, Ni, Cd, Pb, Cr and Co.     

Spectrophotometric determination of some drugs for osteoporosis

Three simple, accurate and sensitive spectrophotometric methods are developed for the determination of some new drugs for the treatment of osteoporosis: risedronate sodium (I), alendronate sodium (II) and etidronate disodium (III). The first method is based on the measurement of difference in absorbance (Delta A) of risedronate sodium in 0.01 mol l(-1) hydrochloric and 0.1 mol l(-1) sodium hydroxide at 262 nm. Beer's law is obeyed over a concentration range of 15-150 microg ml(-1) with mean recovery 99.75+/-1.22 and molar absorptivity (epsilon) 1.891 x 10(3). The second method is based on the reaction of the primary amino group of (II) with ninhydrin reagent in methanolic medium in the presence of 0.05 mol l(-1) sodium bicarbonate. The colored product is measured at 568 nm, and the linearity range is found to be 3.75-45 microg ml(-1) with mean recovery 99.77+/-0.73 and epsilon 9.425 x 10(3). The third method is based on oxidation of the three mentioned drugs with ceric (IV) sulphate in 0.5 mol l(-1) sulphuric acid at room temperature and subsequent measurement of the excess unreacted cerium (IV) sulphate at 320 nm. The method obeyed Beer's law over a concentration range of 2-24 microg ml(-1) for the three drugs with mean recovery 99.79+/-1.16, 99.73+/-1.38 and 99.86+/-1.13 and epsilon 14.427 x 10(3), 13.813 x 10(3) and 14.000 x 10(3) for drugs I, II, III respectively. The proposed methods were successfully applied for the determination of the studied drugs in bulk powder and in pharmaceutical formulations. The results were found to agree statistically with those obtained the reported methods. Furthermore, the methods were validated according to USP regulations and also assessed by applying the standard addition technique.     

A New Neutral Carrier for Silver Ions Based on a Bis(Thiothiazole) Derivative and its Evaluation in Membrane Electrodes

Membrane electrodes based on 2,2-dithiobis(benzothiazole), DTBBT, as a neutral carrier for silver ions are described. Silver-selective membrane electrodes formulated with 2wt% DTBBT ionophore and 50mol% TFPB in an FPNPE plasticized poly (vinyl chloride) exhibited near-Nernstian responses towards silver ions (60.3±0.5mVdecade^–1) over a wide silver ion activity range of 0.83µM to 94mM. Increasing the amount of anionic sites, TFPB, to 100 or 150mol% (relative to the DTBBT weight) resulted in super-Nernstian responses toward silver ions. Membrane electrodes prepared using a low dielectric constant plasticizer, however, exhibited sub-Nernstian responses. Polymer membrane electrodes with optimal composition (i.e., 2wt% DTBBT, 50mol% TFPB in FPNPE plasticized poly(vinyl chloride)) exhibited high potentiometric selectivity towards silver ions over alkali, alkaline earth, transition metal ions, as well as heavy metal ions such as Hg²⁺ and Pb²⁺. A good correlation was found between the potentiometric selectivity coefficients and the change in the UV-visible spectra of the ionophore upon exposure to different metal ions. The overall performance of the silver-selective membrane electrodes based on DTBBT ionophore, which is available at low cost, was found to be comparable to the performance of silver electrodes prepared with Fluka silver ionophore-IV. A DTBBT-based silver electrode was used as an indicator electrode for titrations of silver ions using standard sodium chloride solutions. Sharp inflections occur at the end point, and the data obtained showed 99.4% recovery with a standard deviation of 0.7% (n=3). In addition, the applicability of the DTBBT-based silver-selective electrode is illustrated by measuring the silver concentrations in natural water spiked with silver nitrate and by analyzing the silver in electroplating wastewater samples. The results obtained utilizing a DTBBT-based silver electrode showed very good agreement with the standard methods of analysis.     

Phase-selective a.c. adsorptive stripping voltammetry of lumazine on a hanging mercury drop electrode

The electrochemical behavior of lumazine (LMZ), an important antibacterial agent, has been studied at the hanging mercury drop electrode (HMDE). The nature of the process taking place at the HMDE was clarified. Its adsorption behavior at HMDE has been studied by using a.c and cyclic voltammetry (CV). Both the molecule and its reduced product appeared to be adsorbed at the surface of the electrode. Controlled adsorptive accumulation of LMZ on the HMDE provides the basis for the direct stripping measurement of that compound in the subnanomolar concentration level. Experimental and instrumental parameters for the quantitative determination were optimized. Phase-selective a.c voltammetry provided the best signal and gave a detection limit of 0.15 microg L(-1) (9.0 x 10(-10) mol/L) LMZ in aqueous solution. Molecules or ions which may interfere were studied.     

Intermolecular interactions in (arene)chromium carbonyl compounds: prediction of chiral crystal packing from racemate structure

Six X-ray crystal structures are reported, all containing substituted triphenylmethanol derivative 4 either alone or as its mono or bis(chromium tricarbonyl) complexes. All four chromium complexes studied crystallize with two independent molecules in the crystallographic asymmetric unit. It is demonstrated that from the X-ray crystal structure of the acentric racemic (+/-)-(1pR,1' 'R)(1pS,1' 'S)-[Cr(CO)(3)(eta(6)-t-BuC(6)H(3)(CMeOMe)CPh(2)OH)], (+/-)-3, it is possible to deduce the 4-fold helical structure of the chiral (-)-(1pR,1' 'R) isomer, (-)-3. The bimetallic derivatives demonstrate the ability to control intermolecular interactions by the positioning of relative stereochemistry.     

Calculation of enthalpies of hydrogenation of hydrocarbons

Sets of hydrogen molecule equivalents have been developed which permit the calculation of hydrogenation of different types of carbon-carbon bonds from ab initio total energies (3-21G and 6-31G* basis sets, and, to a more limited extent, for MP2/6-31G* data) of reactants and products. The calculated enthalpies of hydrogenation are in good agreement with experiment for unstrained molecules, with average errors on the order of 2 kcal/mol. The 6-31G* equivalents allow the enthalpies for strained molecules to be calculated accurately, but the 3-21G equivalents do not. The equivalents for both basis sets have been tested by calculating the enthalpies of hydrogenation of carbon-carbon bonds in nitrogen- and oxygen-containing organic molecules, free radicals, and classical carbocations. The results are in good agreement with experiment in most cases.     

Synthesis of 1H-pyrazolo[3,4-e]-s-triazolo[3,4-c]-as-triazines, 8H-pyrazolo[3,4-e]tetrazolo[5,1-c]-as-triazine and 1,7-dihydro-8H-pyrazolo[3,4-e]-as-triazine derivatives

3-Hydrazino-7-methyl-5-phenyl-5H-pyrazolo[3,4-c]-as-triazine 1 underwent ring closure and/or condensation reaction with formic acid, acetic acid, acetic anhydride and benzoyl chloride to afford 1H-pyrazolo-[3,4-d]-s-triazolo[3,4-c]-as-triazines 2, 5 and 7a and/or N-acyl derivatives 3, 4 and 6 . N-Acyl derivatives 3 and 6 underwent cyclisation reaction on treatment with phosphoryl chloride to give 5 and 7a . 3-Methyl-1-phenyl-8-aryl-1H-pyrazolo[3,4-e]-s-triazolo[34,-c]-as-triazines 7 were also prepared by the reaction of the hydrazono derivatives 8 wit thionyl chloride. On treatment of 1 with nitrous acid gave the 8H-pyrazolo[3,4-e]tetrazolo-[5,1-c]-as-triazine 9 . Compound 1 underwent ring closure with carbon disulphide or ethyl chloroformate to 1,7-dihydro-8H-pyrazolo[3,4-e]-s-triazolo[3,4-c]-as-triazine derivatives 10 and 12 . Reaction of 1 with ethyl acetoacetate or acetylacetone gave 3-pyrazolo derivatives 13 and 14 .     

4‐[3‐(3,4‐Di­methoxy­phenyl)­prop‐2‐enoyl]­phenyl methacryl­ate and 4‐[3‐(2‐bromo­phenyl)­prop‐2‐enoyl]­phenyl methacryl­ate

Chalcones (α,β‐unsaturated ketones) are effective antitumour agents. It has been proved that having halogen or methoxy groups substituted in various positions of the phenyl ring enhances the activity of chalcones many times. The title compounds, C₂₁H₂₀O₅ and C₁₉H₁₅BrO₃, respectively, were chosen for crystallographic study in order to determine their structures and conformations. In both compounds, the keto group is in the s‐cis conformation and is almost planar. There are weak intramolecular interactions in both structures.     

Synthesis and Biological Activity of Some New Pyrazolo[3,4‐b]Pyrazines

New derivatives of pyrazolo[3,4‐b]pyrazine and related heterocycles were prepared starting from 6‐amino‐3‐methyl‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyrazine‐5‐carbonitrile ( 2 ) and using the key intermediates 4 , 5 , 6 , 14 , 15 and 16 . Some of the prepared compounds were evaluated for their antifungal and antibacterial activities.