The O-phthalimidomethyl trichloroacetimidate (1), as a latent aminomethylating agent, exhibits high electrophilicity towards a variety of C-nucleophiles in the presence of catalytic amounts of TMSOTf and mild reaction conditions. The nucleophiles include aromatics, alkenes and active methylene compounds 2-11 whereby a phthalimidomethyl group could be introduced to give compounds 12-22. Removal of the phthaloyl group gave the respective amines, β-amino ketones, and β-amino acids. The O-(trichloroacetamido)methyl trichloroacetimidate (35) was also found to be a good amidomethylating agent. 相似文献
A simple and rapid flow-injection spectrophotometric method for the determination of iron(III) and total iron is proposed.
The method is based on the reaction between iron(III) and O-acetylsalicylhydroxamic acid (AcSHA) in a 2 % methanol solution resulting in an intense violet complex with strong absorption
at 475 nm. Optimum conditions for the determination of iron(III) and the interfering ions were tested. The relative standard
deviation for the determination of 5 μg L−1 iron(III) was 0.85 % (n = 10), and the limit of detection (blank signal plus three times the standard deviation of the blank) was 0.5 μg L−1, both based on the injection volumes of 20 μL. The method was successfully applied in the determination of iron(III) and
total iron in water and ore samples. The method was verified by analysing a certified reference material Zn/Al/Cu 43XZ3F and
also by the AAS method. 相似文献
Selective polymeric extractants were prepared for preconcentration of Cibacron reactive red dye, a dye that is often applied
with Cibacron reactive blue and Cibacron reactive yellow for dyeing of fabrics. The best extractant was fabricated (in chloroform)
using methacrylic acid (as monomer), ethylene glycol dimethacrylate (as crosslinker), AIBN (as initiator for polymerization),
and red dye as template molecule, with a molar stoichiometric ratio of 8.0:40.0:2.5:0.63, respectively. The structure of the
molecularly imprinted polymer (MIP) was robust, and resisted dissolution up to 260 °C. Compared with the un-imprinted polymer,
the imprinted product has a large specific surface area which improved its adsorption capacity. The effect of imprinting was
obvious from the adsorption capacity measured at pH 4 for red dye (the imprinted molecule), which was increased from 24.0
to 79.3 mg g−1 after imprinting. Equilibrium adsorption studies revealed that the dye-imprinted-polymer enables efficient extraction of
red dye even in the presence of blue and yellow dyes which have similar chemical natures to the red dye. The selectivity coefficients
Sred dye/dye, were 13.9 and 17.1 relative to the yellow and blue dyes, respectively. The MIP was found to be effective for red dye preconcentration,
with a preconcentration factor of 100, from tap water and treated textile wastewater. The factors affecting extraction of
red dye by the MIP were studied and optimized. Under the optimized extraction conditions, red dye was selectively quantified
in the presence of other competing dyes at a concentration of 20 μg L−1 from different water systems with satisfactory recoveries (91–95%) and RSD values (∼5.0%). 相似文献
An environmentally benign method of sample preparation based on dispersive liquid–liquid microextraction and solidification of floating organic droplets (DLLME-SFO) coupled with high-performance liquid chromatography with ultraviolet detection has been developed for analysis of non-steroidal anti-inflammatory drugs (NSAIDs) in biological fluids. A low-toxicity solvent was used to replace the chlorinated solvents commonly used in conventional DLLME. Seven
conditions were investigated and optimized: type and volume of extraction solvent and dispersive solvent, extraction time, effect of addition of salt, and sample pH. Under the optimum conditions, good linearity was obtained in the range 0.01–10 µg mL−1, with coefficients of determination (r2) >0.9949. Detection limits were in the range 0.0034–0.0052 µg mL−1 with good reproducibility (RSD) and satisfactory inter-day and intra-day recovery (95.7–115.6 %). The method was successfully used for analysis of diclofenac, mefenamic acid, and ketoprofen in human urine. Analysis of urine samples from a patient 2 and 4 h after administration of diclofenac revealed concentrations of 1.20 and 0.34 µg mL−1, respectively.
A giant tetrahedral heterometallic polyoxometalate (POM) [Dy30Co8Ge12W108O408(OH)42(OH2)30]56?, which shows single‐molecule magnet (SMM) behavior, is described. This hybrid contains the largest number of 4f ions of any polyoxometalate (POM) reported to date and is the first to incorporate two different 3d–4f and 4f coordination cluster assemblies within same POM framework. 相似文献
Gas‐phase pyrolysis of N‐arylidine‐N′‐pyrimidin‐2‐yl‐hydrazine derivatives 1a , 1b , 1c , 1d , 1e gave the corresponding arylnitriles 2a , 2b , 2c , 2d , 2e , 2‐aminopyrimidine 3 , 3‐phenyl‐1,2,4‐triazolo[4,3‐a]pyrimidines 4 , 2‐phenyl‐1,2,4‐triazolo[1,5‐a]pyrimidines 5 , 2,4,5‐triphenyl‐1H‐imidazole 6 , and 2,3‐diphenylquinoline 7 . The analyses of the reaction products are reported and used to elucidate the mechanism of the pyrolytic process. 相似文献
The title coordination complex, [Ni(C14H14O2PS2)2(C12H8N2)] or [Ni(pMePh‐dtp)2(phen)] (phen is 1,10‐phenanthroline; dtp is diaryldithiophosphate), has a non‐crystallographic twofold axis of symmetry through the Ni atom and the phen moiety. Two O,O‐di‐p‐tolyldithiophosphate (dtp) ions act as bidentate ligands. The central metal atom is coordinated by four S atoms from two dtp groups and two N atoms from the phen ligand. The title compound displays distorted octahedral geometry around the central Ni atom. 相似文献
A new sample pre-treatment technique termed cone-shaped membrane liquid phase microextraction (CSM-LPME) was developed and combined with micro-liquid chromatography (micro-LC) for the determination of selected pesticides in water samples. Four pesticides (hexaconazole, procymidone, quinalphos and vinclozolin) were considered as target analytes. Several important extraction parameters such as types of extraction solvent, agitation rate, pH value, total exposure time and effect of salt and humic acids were optimized. Enrichment factors of > 50 folds were easily achieved within 20 min of extraction. The analytical data demonstrated relative standard deviations for the reproducibility of the optimized CSM-LPME method ranging from 6.3 to 7.5%. The correlation coefficients of the calibration curves were at least 0.9995 across a concentration range of 2-100 microg/L. The detection limits for all the analytes were found to be in the range of 1.1-1.9 microg/L. 相似文献
Summary A systematic comparative study of the adsorption and association of 3-methylxanthine (3MXan) and 7-methylxanthine (7MXan) at mercury-solution interfaces in acidic, neutral, and alkaline buffer solutions was undertaken by ac voltammetry. At bulk concentrations of3MXan above a threshold value, the stacking interactions between vertically oriented molecules lead to a slow reorientation aroundEecm, and the molecules adopt a perpendicular orientation. The association of the adsorbed molecules of7MXan is hindered and is not effective in promoting base-base stacking interactions. The enhanced surface activity of3MXan compared to7MXan results from the different position of the methyl group in the purine moiety. The effect of some divalent metal ions on adsorption stages and association of the investigated compounds has been studied. The results indicate that the complexation of methylated xanthine enhances the stacking interactions and hence would be expected to facilitate the formation of perpendicularly stacked layers ofM(II)-MXan complexes on the electrode surface. The adsorption parameters of the investigated compounds have been computed in absence and presence of Cu(II) at differentpH values. The results are compared with the behaviour of xanthine.
Vergleichende Untersuchungen zur Adsorption und Assoziation von 3-Methylxanthin und 7-Methylxanthin an einer geladenen Grenzfläche
Zusammenfassung Eine systematische vergleichende Untersuchung zur Adsorption und Assoziation von 3-Methylxanthin (3MXan) und 7-Methylxanthin (7MXan) an Quecksilber-Lösungs-Grenzflächen wurde mittels AC-Voltammetrie in sauren, neutralen und basischen Pufferlösungen durchgeführt. Oberhalb einer bestimmten Grenzkonzentration kommt es durch Wechselwirkungen zwischen vertikal angeordneten3MXan-Molekülen zu einer langsamen Reorientierung umEecm, was zu einer senkrechten Anordnung führt. Die Assoziation von7MXan ist gehindert und erlaubt daher keine ausgeprägten Basen-Basen-Wechselwirkungen. Die erhöhte Oberflächenaktivität von3MXan gegenüber7MXan resultiert aus der unterschiedlichen Stellung der Methylgruppe am Purinrest. Der Effekt einiger zweiwertiger Metallionen auf die Adsorption und Assoziation von3MXan und7MXan wurde untersucht. Die Ergebnisse weisen auf eine Begünstigung der Wechselwirkungen hin; die Bildung von vertikal angeordneten Grenzschichten an der Elektrodenoberfläche sollte daher im Fall vonM(II)-Mxan-Komplexen erleichtert sein. Die Adsorptionsparameter der untersuchten Verbindungen wurden in Abwesenheit und in Gegenwart von Cu(II) bei verschiedenenpH-Werten berechnet. Die Ergebnisse werden mit dem Verhalten von Xanthin verglichen.