Inverse gas chromatographic measurement of solubility parameters in liquid crystalline systems

Inverse gas chromatography, (IGC), has been used to measure interaction parameters in two low-molar-mass liquid crystals and a polymer substituted with the same mesogenic group. Solubility parameters have been calculated. The IGC method is shown to be applicable to this class of compounds and to give meaningful values over a range of temperatures.     

Voltammetry of Plastocyanin at a Graphite Electrode: Effects of Structure, Charge, and Electrolyte

Comparative voltammetric studies on Anabaena variabilis plastocyanin (positively charged at neutral pH) and spinach and poplar plastocyanins (negatively charged at neutral pH) have been undertaken at an edge-plane graphite electrode as a function of ionic strength, pH, and Mg(2+) concentration at 3 degrees C. The aim was to provide a more detailed understanding of the influence of the electrode-protein (solution) interfacial characteristics, as well as the variation of the formal potential with both the nature of the plastocyanin species and the pH. As might be expected, some of the interfacial properties associated with the positive charge on A. variabilis plastocyanin are the opposite of those observed with the negatively charged plastocyanins. For example, the linear diffusion component of the mass transport process for A. variabilis plastocyanin under the conditions of cyclic voltammetry is decreased and the radial diffusion component is increased by the addition of Mg(2+), whereas the reverse occurs with poplar and spinach plastocyanins. The voltammetrically determined reversible potentials for A. variabilis plastocyanin are considerably less positive than those for spinach and poplar plastocyanins, in agreement with values calculated from chemically based redox studies. Ionic strength effects, as determined by addition of NaClO(4) over the concentration range 0.005-0.20 M, are negligible for all three proteins. The addition of Mg(2+) causes a significant shift in the reversible potential toward more positive values for spinach and poplar plastocyanin but only a small positive shift for A. variabilis plastocyanin. The difference is attributed to a specific binding effect. The addition of Mg(2+) also dramatically alters the pH dependence of the reversible potential, indicating that the equilibrium between the protonated and unprotonated forms of reduced plastocyanin is modified by binding of Mg(2+) to the protein. It is concluded that the effects of biologically relevant redox-inactive cations such as Mg(2+) or Ca(2+) have to be considered carefully in studies of the redox chemistry of metalloproteins.     

Ambient temperature, tandem catalytic dehydrocoupling-hydrogenation reactions using Rh colloids and Me2NH.BH3 as a stoichiometric H2 source

Highly active Rh colloids, generated in situ during the catalytic dehydrocoupling of Me2NH.BH3 using [{Rh(cod)(mu-Cl)}2] as a precatalyst, are capable of efficiently hydrogenating alkenes at 25 degrees C in a one-pot procedure using only the evolved H2 from the initial dehydrocoupling reaction.     

Synthesis of enantiopure dihydropyranones: aldol-based ring expansion of dihydrofurans

[reaction: see text] The stereoselective Birch reduction of 3-methyl-2-furoic acids using a readily available chiral auxilairy is described; by coupling this process to an oxidative cleavage/aldol ring closure sequence we were able to produce highly functionalized and enantiopure dihydropyranones in high yield. This sequence has ample flexibility built into it, either by the use of different electrophiles during reductive alkylation or by subsequent derivatization of the dihydropyranone after ring expansion.     

A new synthesis of (PhPSe2)2 (Woollins reagent) and its use in the synthesis of novel P-Se heterocycles

A new and improved method for the preparation of (PhPSe2)2 (Woollins reagent (WR), 1) is reported. Reaction of dichlorophenylphosphine with Na2Se, (prepared from the reaction of elemental selenium and sodium in liquid ammonia) gives WR with excellent purity, high yield and on a larger scale than was previously possible. Four novel phosphorus-selenium heterocycles, including a spirocyclic heterocycle exhibiting a four-membered P2SeC ring, were obtained from the reaction of WR with two reactive substrates (diphenylcyclopropenone and methyl phenylpropiolate). Useful selenocarbonyl and thiocarbonyl compounds were obtained from the reaction of both WR and Lawesson's reagent with diphenylcyclopropenone. All new compounds were characterised spectroscopically and three demonstrative X-ray structures are reported.     

Nanotubes from the self-assembly of asymmetric crystalline-coil poly(ferrocenylsilane-siloxane) block copolymers

Block copolymers with a high asymmetry normally give spherical starlike micelles in a solvent selective for the longer block. We have discovered that samples of poly(ferrocenyldimethylsilane-b-dimethylsiloxane) (PFS-b-PDMS) with block ratios of 1:12 form nanotubes in n-hexane and n-decane, which are poor solvents for PFS. Two block copolymer samples PFS(40)-b-PDMS(480) (M(n) = 45 300, PDI = 1.01) and PFS(80)-b-PDMS(960) (M(n) = 90 500, PDI = 1.01) were synthesized by sequential anionic polymerization. When self-assembly occurs, the PFS blocks aggregate and crystallize to form a shell with a cavity in the middle of the tube, while the PDMS blocks form the corona. The nature of these structures was elucidated by conventional transmission electron microscopy and dark-field scanning transmission electron microscopy. Time- and temperature-dependence studies revealed that a variety of morphologies are formed initially depending on the conditions of sample preparation, but most of them eventually rearrange to form nanotubules. The lengths of the tubes can be varied with time and with the choice of solvents. We have been able to grow nanotubes with lengths reaching 0.1 mm. The presence of the hollow core was confirmed by trapping tetrabutyllead in the cavity and performing energy-dispersive X-ray measurements on the resulting structure.     

Characterisation of putative pentose-containing conjugates as minor metabolites of 4-bromoaniline present in the urine of rats following intraperitoneal administration

The metabolic fate of 4-bromoaniline (4-BrA) was investigated following intraperitoneal administration to the rat at 50 mg kg(-1), using high-performance liquid chromatography/time-of-flight tandem mass spectrometry (HPLC/TOF-MS/MS). Up to five metabolites were detected in urine that correspond to isomeric pentose conjugates (possibly ribosides) of a hydroxysulphate of 4-BrA. This identification is supported by further studies where the water used in the reversed-phase solvent system was replaced with deuterated water in order to confirm that the number of exchangeable protons present in the metabolites was consistent with the proposed structures.     

A compact flow injection analysis system for surface mapping of phosphate in marine waters

The design, construction and validation of a compact, portable flow injection analysis (FIA) instrument for underway analysis of phosphate in marine waters is described. This portable system employs gas pressure for reagent propulsion and computer controlled miniature solenoid valves for precise injection of multiple reagents into a flowing stream of filtered sample. A multi-reflection flow cell with a solid state LED photometer is used to detect filterable reactive phosphate (0.2 mum) as phosphomolybdenum blue. All the components are computer controlled using software developed using the Labviewtrade mark graphical programming language. The system has the capacity for sample throughput of up to 380 phosphate analyses per hour, but in the mode described here was operated at 225 analyses per hour. Under these conditions, the system exhibited a detection limit of 0.15 muM, reproducibility of 1.95 % RSD (n=9) and a linear response (r(2)=0.9992) when calibrated in the field with standards in the range 0.81-3.23 muM. The system was evaluated for the mapping of phosphate concentrations in Port Phillip Bay, south eastern Australia, and during the course of a 150 km cruise, 542 analyses were performed automatically. In general, good agreement was observed between analyses obtained using the portable FIA system and those obtained from manual sampling and laboratory analysis.     

Synthesis and characterization of biocompatible, thermoresponsive ABC and ABA triblock copolymer gelators

The synthesis of doubly thermoresponsive PPO-PMPC-PNIPAM triblock copolymer gelators by atom transfer radical polymerization using a PPO-based macroinitiator is described. Provided that the PPO block is sufficiently long, dynamic light scattering and differential scanning calorimetry studies confirm the presence of two separate thermal transitions corresponding to micellization and gelation, as expected. However, these ABC-type triblock copolymers proved to be rather inefficient gelators: free-standing gels at 37 degrees C required a triblock copolymer concentration of around 20 wt%. This gelator performance should be compared with copolymer concentrations of 6-7 wt% required for the PNIPAM-PMPC-PNIPAM triblock copolymers reported previously. Clearly, the separation of micellar self-assembly from gel network formation does not lead to enhanced gelator efficiencies, at least for this particular system. Nevertheless, there are some features of interest in the present study. In particular, close inspection of the viscosity vs temperature plot obtained for a PPO43-PMPC160-PNIPAM81 triblock copolymer revealed a local minimum in viscosity. This is consistent with intramicelle collapse of the outer PNIPAM blocks prior to the development of the intermicelle hydrophobic interactions that are a prerequisite for macroscopic gelation.     

Control of mechanically activated polymersome fusion: Factors affecting fusion

Previously, it was found that extruded (200 nm) polymer vesicles are capable of fusion into giant polymersomes using agitation in the presence of salt. In this study, several factors contributing to this phenomenon, including the effects of (i) polymer vesicle concentration, (ii) agitation speed and duration, and (iii) variation of the salt and its concentration are investigated. To accomplish these goals dynamic light scattering is used in conjunction with fluorescence microscopy, which provides insight into vesicles above the practical limit for DLS characterization. Increasing the concentration of the polymer dramatically increases the production of giant vesicles through the increased collisions of polymersomes. Likewise, increasing the frequency of agitation increases the efficiency of fusion, although ultimately the size of vesicle that could be produced is limited due to the high shear involved. Finally, salt‐mediation of the fusion process was not limited to NaCl, but is instead a general effect facilitated by the presence of solvated ionic compounds, albeit with different salts initiating fusion at different concentrations. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 297–303