Dendritic liquid-crystalline fullerene-ferrocene dyads

First- and second-generation ferrocene-based dendrimers, fullerene and a second-generation liquid-crystalline poly(arylester) dendrimer carrying four cyanobiphenyl units were assembled to elaborate polyfunctional materials displaying mesomorphic and electronic properties. The targeted compounds gave rise to enantiotropic smectic A phases and organized into bilayer structures within the smectic layers. Cyclic voltammetry investigations revealed oxidation and reduction processes in agreement with the presence of both ferrocene and fullerene units. Finally, strong quenching of the fluorescence was obtained for the fullerene-ferrocene dyads suggesting efficient elecron transfer from the ferrocene-based dendrimer to fullerene.     

Alkaline hydrolysis of 2-(trifluoromethyl)imidazo[4,5-f] and -[4,5-h]quinolines

2-(Trifluoromethyl)imidazo[4,5-$\text{f}$] and -[4,5-$\text{h}$]quinoline have been prepared from 5(6),acetamido-2-(trifluoromethyl)benzimidazole and 7,8-diaminoquinoline respectively. These (trifluoromethyl)- quinolines like 2-(trifluoromethyl)imidazoles but unlike 2-(trifluoromethyl) benzimidazoles, undergo hydrolysis in dilute sodium hydroxide to give ultimately the corresponding imidazo[4,5-$\text{f}$] and -[4,5-$\text{h}$]- quinoline, respectively.     

Apparent molar heat capacities and volumes of silver nitrate and silver perchlorate in aqueous solution at 298 K

We have made calorimetric and density measurements leading to apparent molar heat capacities and volumes of dilute aqueous solutions of silver nitrate and silver perchlorate at 298 K. Resulting apparent molar properties at infinite dilution are the following: φ^o_c(AgNO₃) = ? 36.8 J K^?1 mol^?1, φ^o_v(AgNO₃) = 29.1 cm³ mol^?1, φ^o_c(AgClO₄) = 11.0 J K^?1 mol^?1, and φ^o_v(AgClO₄) = 43.5 cm³ mol^?1.     

99Ru Mössbauer spectra of quaternary ruthenium(V) oxides with the hexagonal barium titanate structure

⁹⁹Ru Mössbauer spectra have been recorded at 4.2 K for the quaternary oxides Ba₃Ru₂MO₉ (M = Mg, Ca, Sr; Co, Ni, Cu, Zn; and Cd), all of which crystallize with the hexagonal barium titanate structure. The Ca, Sr, and Cd compounds give sharp symmetrical singlets with chemical isomer shifts typical of ruthenium in the +5 oxidation state. The absence of magnetic hyperfine splitting is consistent with the published interpretation of magnetic susceptibility data in terms of binuclear intracluster spin pairing which leads to an S = 0 ground state. In contrast, magnetic hyperfine splitting is seen for the Mg, Zn, Co, Ni, and Cu compounds; this can be interpreted only in terms of long-range magnetic order and the absence of such an S = 0 ground state at 4.2 K. This differs from the published interpretation of the magnetic susceptibility data for Ba₃Ru₂MgO₉ in the low-temperature region. The magnetic flux densities at the ruthenium nuclei in the magnetically ordered compounds (32.5–51.6 T) are lower than those normally associated with ruthenium(V), and the spectra cannot be curve fitted satisfactorily with single hyperfine patterns having the natural linewidth. Possible reasons for these observations are discussed.     

Quinazolines and 1,4-benzodiazepines. LXI. Syntheses of 7-Acetyl-1,4-benzodiazepines

Methods for the synthesis of the biologically active 7-acetyl-1,3-dihydro-5-phenyl-2H-1,4-benzodiazepin-2-one ( 6 ) are described. This includes two new methods for the preparation of 5-acetyl-2-aminobenzophenone ( 4 ). The crucial steps in these syntheses involve, respectively, the oxidation of an ethyl group to an acetyl group with permanganate or ceric ions ( 2 → 3; 5 → 6 ), the selective reaction of methyl lithium with the cyano group of 7-cyano-1,3-dihydro-5-phenyl-2H-1,4-benzodiazepin-2-one ( 8 ) and the efficient condensation of benzyl cyanide with the ethylene ketal of p-nitroacetophenone to form the anthranil 11 .     

Relaxation processes in semidilute solutions of polymers in liquid crystal solvents

We investigate the relaxation phenomena in a polymer (polystyrene)/liquid crystal (4-cyano-4'-n-octyl-biphenyl) system, in its homogeneous isotropic phase near the isotropic-isotropic, isotropic-nematic, and isotropic-smectic coexistence curve, using both polarized and depolarized photon correlation spectroscopy (PCS). We study this system for different polystyrene molecular weights (4750, 12 500, and 65 000 g/mol), different compositions (50, 40, 30, and 10% polystyrene (PS) by weight), and different temperatures close to phase boundaries. First of all, we determine the phase diagrams of this system for the different molecular weights. The shape of the phase diagrams strongly depends on the molecular weight. However, in all cases, at low temperatures, these systems separate into an almost pure liquid crystalline (LC) phase and polystyrene-rich phase. PCS measurements show that the relaxation processes in the homogeneous phase are not affected by the proximity of the nematic, or smectic, boundaries (even at a temperature of 0.1 degrees C above the phase separation in two phases). In polarized PCS experiments, we always see three relaxation processes well separated in time: one, very fast, with a relaxation time of the order of 10(-5) s; a second one with a relaxation time within the range 10(-2)-10(-3) s; and a last one, very slow, with a relaxation time of the order of 1 s. Both the fast and slow modes are independent of the wave vector magnitude, while the intermediate relaxation process is diffusive. In depolarized PCS experiments, the intermediate mode disappears and only the fast and slow relaxation processes remain, and they are independent of the magnitude of the wave vector. The diffusive mode is the classical diffusive mode, which is associated with the diffusion of polymer chains in all polymer solutions. The fast mode is due to the rotational diffusion of 4-cyano-4'-n-octyl-biphenyl (8CB) molecules close to polystyrene chains (transient network). Finally, we assign the slowest mode to reorientational processes of small aggregates of PS chains that are not dissolved in 8CB.     

Synthesis of (r)- and (s)-1-formyl-6,7,8,9-tetrahydro- N,N-(dipropyl)-3H-benz[e]indol-8-amines: Potent and orally active 5-ht1a receptor agonists

An efficient synthesis of the potent and orally active 5-HT_1A agonists, (R)-(+)- and (S)-(-)-1-formyl-6,7,8,9-tetrahydro-N,N-dipropyl-3H-benz[e]indol-8-amines 1a and 1b , is described. This synthesis was accomplished in twelve steps from commercially available 1,5,6,7-tetrahydro-4H-indol-4-one ( 5 ). The key step involved a regio-controlled Friedel-Crafts acylation of 1-(p-toluenesulfonyl)indol-4-acetyl chloride with ethylene to yield a versatile synthon, 3-(p-toluenesulfonyl)-6,7,8,9-tetrahydro-3H-benz[e]indol-8-one ( 10 ). Subsequent coupling of this ketone with chiral α-methylbenzylamine under reductive amination conditions yielded a mixture of diastereomers. These diastereomers were efficiently separated by either chromatography or fractional recrystallization of the derived hydrochloride salts. Debenzylation of the pure diastereomers was followed by alkylation and formylation to yield (R)-(+)- and (S)-(-)-enantiomers 1a and 1b with >99% purity.     

Synthesis and Conformational Analysis of the Multidrug Resistance-Reversing Agent Hapalosin and Its Non-N-methyl Analog

Hapalosin was initially synthesized by macrolactonization, and a second synthesis was achieved by cycloamidation. In both syntheses, three of the five stereocenters in hapalosin were established by two Brown allylboration reactions. The synthesis of the non-N-Me analog of hapalosin involved chelation-controlled reduction of a gamma-amino-beta-keto ester and cycloamidation. In CDCl(3) at 25 degrees C, synthetic hapalosin exists as a 2.3:1 mixture of conformers, while its non-N-Me analog exists only as a single conformer. (1)H,(1)H-NOESY and computation reveal that the configuration of the amide bond is responsible for the conformations of the two compounds. The major conformer of hapalosin is found to be an s-cis amide, the minor conformer an s-trans amide, and the non-N-Me analog an s-trans amide. Applying distance constraints to protons that exhibit NOESY correlations, computation shows that the major conformer of hapalosin and the non-N-Me analog have very different conformations. By contrast, the minor conformer of hapalosin and the non-N-Me analog have very similar conformations.     

Quantitation of acrylamide in food products by liquid chromatography/mass spectrometry

A simple and inexpensive liquid chromatography/mass spectrometry (LC/MS) method was developed for the quantitation of acrylamide in various food products. The method involved spiking the isotope-substituted internal standard (1-C13 acrylamide) onto 6.00 g of the food product, adding 40 mL distilled/deionized water, and heating at 65 degrees C for 30 min. Afterwards, 10 mL ethylene dichloride was added and the mixture was homogenized for 30 s and centrifuged at 2700 x g for 30 min, and then 8 g supernatant was extracted with 10, 5, and 5 mL portions of ethyl acetate. The extracts were combined, dried with sodium sulfate, and concentrated to 100-200 microL. Acrylamide was determined by analysis of the final extract on a single quadrupole, bench-top mass spectrometer with electrospray ionization, using a 2 mm id C18 column and monitoring m/z = 72 (acrylamide) and m/z = 73 (internal standard). For difficult food matrixes, such as coffee and cocoa, a solid-phase extraction cleanup step was incorporated to improve both chromatography and column lifetime. The method had a limit of quantitation of 10 ppb, and coefficients of determination (r2) for calibration curves were typically better than 0.998. Acceptable spike recovery results were achieved in 11 different food matrixes. Precision in potato chip analyses was 5-8% (relative standard deviation). This method provides an LC/MS alternative to the current LC/MS/MS methods and derivatization gas chromatography/mass spectrometry methods, and is applicable to difficult food products such as coffee, cocoa, and high-salt foods.