Energy transfer in thermal and hyperthermal collisions between CN(X2Sigma+, v = 2) in selected rotational levels (Ni = 0, 1, 6, 10, 15 and 20) and N2

We report rate coefficients (k(tot,N(i))) for total removal of CN(X(2)Sigma(+), v = 2, N(i)) radicals from selected rotational levels (N(i) = 0, 1, 6, 10, 15 and 20) and for state-to-state rotational energy transfer (k(i-->f)) between levels N(i) and other rotational levels N(f) in single collisions with N(2). CN radicals have been generated using two sources: (a) the pulsed laser photolysis of ICN at 266 nm, which generates translationally 'hot' CN radicals; and (b) the pulsed laser photolysis of NCNO at 570 nm, which generates CN radicals with translational energies close to the average value at 298 K. Comparison of the values of k(tot,N(i)) obtained using these two sources of CN demonstrates: firstly, that the same results are obtained as long as time is allowed for the translationally hot CN radicals generated from ICN to be thermalised before radicals are promoted to a specific rotational level in v = 2 using a tuneable infrared 'pump' laser operating at ca. 2.45 micro m; and secondly, that the rate coefficients decrease, but the averaged cross-sections remain approximately constant, as the excess translational energy in CN radicals is moderated by collisions. With NCNO as the source of CN radicals, the observed values of k(tot,N(i)) do not depend on the delay between the pulses from the photolysis and pump lasers. Finally, we demonstrate that, for the non-reactive collision partner N(2) and with allowances made for the rate coefficients that are too small to measure directly, the sum of the state-to-state rate coefficients, Sigma(f)k(i-->f), for rotational energy transfer from a selected initial level N(i) agrees quite well with the value of k(tot,N(i)) for total transfer from the same initial level. The values of k(tot,N(i)) and of the state-to-state rate coefficients are compared with similar, earlier, results in which helium and argon were the collision partners. The relevance of these results to the study of collisions of CN with reactive collision partners is briefly discussed.     

Photochemical patterning of a self-assembled monolayer of 7-diazomethylcarbonyl-2,4,9-trithiaadmantane on gold films via Wolff rearrangement

Photolithographic attachment of functional organic molecules via ester or amide linkages to self-assembled monolayers (SAMs) on gold thin films was achieved by employing a novel photoreactive surface anchor, 7-diazomethylcarbonyl-2,4,9-trithiaadmantane. The photoreactive SAM was prepared by the spontaneous physical adsorption of the photoreactive surface anchor onto gold surfaces. The alpha-diazo ketone moiety of the SAM was found to display the classical Wolff rearrangement reactivity to produce a ketene intermediate on the exposed area. Organic molecules such as alcohols and amines can thus be attached to the gold surfaces selectively by the facile in situ formation of ester or amide linkages. The structure and reactivity of the photoreactive surface anchor were characterized by real-time FT-IR, fluorescence, and polarization modulation infrared reflectance absorption spectroscopy (PM-IRRAS). The Wolff rearrangement reactivity of the SAM suggested that a "surface-isolated" carbonylcarbene may be generated when the SAM was exposed to 255-nm irradiation.     

Coordination Complexes of a Neutral 1,2,4‐Benzotriazinyl Radical Ligand: Synthesis,Molecular and Electronic Structures,and Magnetic Properties

A series of d‐block metal complexes of the recently reported coordinating neutral radical ligand 1‐phenyl‐3‐(pyrid‐2‐yl)‐1,4‐dihydro‐1,2,4‐benzotriazin‐4‐yl ( 1 ) was synthesized. The investigated systems contain the benzotriazinyl radical 1 coordinated to a divalent metal cation, Mn^II, Fe^II, Co^II, or Ni^II, with 1,1,1,5,5,5‐hexafluoroacetylacetonato (hfac) as the auxiliary ligand of choice. The synthesized complexes were fully characterized by single‐crystal X‐ray diffraction, magnetic susceptibility measurements, and electronic structure calculations. The complexes [Mn( 1 )(hfac)₂] and [Fe( 1 )(hfac)₂] displayed antiferromagnetic coupling between the unpaired electrons of the ligand and the metal cation, whereas the interaction was found to be ferromagnetic in the analogous Ni^II complex [Ni( 1 )(hfac)₂]. The magnetic properties of the complex [Co( 1 )(hfac)₂] were difficult to interpret owing to significant spin–orbit coupling inherent to octahedral high‐spin Co^II metal ion. As a whole, the reported data clearly demonstrated the favorable coordinating properties of the radical 1 , which, together with its stability and structural tunability, make it an excellent new building block for establishing more complex metal–radical architectures with interesting magnetic properties.     

Characterization of TiO2 nanoparticles surface modified with aluminum stearate

This paper uses measurements of adsorption and vibrational spectra (DRIFTS, ATR, and Raman) to characterize TiO2 (rutile) nanoparticles that have been surface treated with aluminum and stearate, "aluminum stearate". From these measurements, we have developed a model of titania particles covered by patches of "alumina". Vibrational spectra, particularly the spectra of the carboxylate headgroups, show that the stearate then adsorbs on both the titania and the alumina. Surprisingly, the distribution of the stearate between alumina and titania is sensitive to the presence of water. As the water content decreases, the relative amounts of stearate on titania, rather than alumina, increase, and this increase is accompanied by a less ordered structuring of the stearate tails, as evidenced by a shift of the C-H stretching bands to higher frequencies and a broadening of the 1296 cm(-1) Raman band. This effect is consistent with earlier observations that the presence of water reduced the bonding of stearate headgroups to the surface of titania. We have also shown that the dispersion in C12-C15 alkyl benzoate of aluminum stearate coated titania is sensitive to the presence of small amounts, approximately 4%, of water. Finally, we have demonstrated that surface stearate, like surface alumina, reduces the rate of phototocatalytic oxidation of 2-propanol. A 7% stearate coating reduces acetone formation by a factor of 4. There is no evidence from these studies that, during the oxidation experiment, 2-propanol displaces stearate from the titania surface.     

N-heterocyclic carbene tethered amido complexes of palladium and platinum

With a view to applications in bifunctional catalysis, a modular cross-coupling strategy has been used to prepare amine bis(imidazolium) salts (3a and 3b) and an amine mono(imidazolium) salt (6) as precursors to chelating amido-NHC ligands. Treating the pro-ligands 3 with 3 equivalents of the bulky base KHMDS and Pd(OAc)(2) or PtCl(2)(COD) gave the four amido bis(N-heterocyclic carbene) pincer complexes [CNC-R]M-I [M = Pd (7) or Pt (8); R = i-Pr (a) or n-Bu (b)], including the first examples of platinum complexes of a CNC ligand. The reaction of 7a with AgOTf in pyridine gave the cationic complex {[CNC-i-Pr]Pd-py}OTf (9a). Heating a mixture of amine mono(imidazolium) salt 6 with PdCl(2) or K(2)PtCl(4), K(2)CO(3) and KI in pyridine at 100 °C gave the complexes [C,NH]MI(2)py [M = Pd (10) or Pt (11)], in which the amine arm of the NHC ligand is not deprotonated and does not coordinate to the metal. For a solution of 10 in 1,4-dioxane, deprotonation of the amine occurred in a biphasic reaction with aqueous KOH at 40 °C, giving the dimeric amido complex {[C,N]Pd(μ-OH)}(2) (12). The more inert Pt analogue 11 was unreactive under the same conditions. Solid-state structures of the complexes 7a, 7b, 9a, 10, 11 and 12 have been determined by single crystal X-ray diffraction.     

Influence of Cyclopentadienyl Ring‐Tilt on Electron‐Transfer Reactions: Redox‐Induced Reactivity of Strained [2] and [3]Ruthenocenophanes

In contrast to ruthenocene [Ru(η⁵‐C₅H₅)₂] and dimethylruthenocene [Ru(η⁵‐C₅H₄Me)₂] ( 7 ), chemical oxidation of highly strained, ring‐tilted [2]ruthenocenophane [Ru(η⁵‐C₅H₄)₂(CH₂)₂] ( 5 ) and slightly strained [3]ruthenocenophane [Ru(η⁵‐C₅H₄)₂(CH₂)₃] ( 6 ) with cationic oxidants containing the non‐coordinating [B(C₆F₅)₄]^? anion was found to afford stable and isolable metal?metal bonded dicationic dimer salts [Ru(η⁵‐C₅H₄)₂(CH₂)₂]₂[B(C₆F₅)₄]₂ ( 8 ) and [Ru(η⁵‐C₅H₄)₂(CH₂)₃]₂[B(C₆F₅)₄]₂ ( 17 ), respectively. Cyclic voltammetry and DFT studies indicated that the oxidation potential, propensity for dimerization, and strength of the resulting Ru?Ru bond is strongly dependent on the degree of tilt present in 5 and 6 and thereby degree of exposure of the Ru center. Cleavage of the Ru?Ru bond in 8 was achieved through reaction with the radical source [(CH₃)₂NC(S)S?SC(S)N(CH₃)₂] (thiram), affording unusual dimer [(CH₃)₂NCS₂Ru(η⁵‐C₅H₄)(η³‐C₅H₄)C₂H₄]₂[B(C₆F₅)₄]₂ ( 9 ) through a haptotropic η⁵–η³ ring‐slippage followed by an apparent [2+2] cyclodimerization of the cyclopentadienyl ligand. Analogs of possible intermediates in the reaction pathway [C₆H₅ERu(η⁵‐C₅H₄)₂C₂H₄][B(C₆F₅)₄] [E=S ( 15 ) or Se ( 16 )] were synthesized through reaction of 8 with C₆H₅E?EC₆H₅ (E=S or Se).     

In Situ Visualization of Block Copolymer Self‐Assembly in Organic Media by Super‐Resolution Fluorescence Microscopy

Analytical methods that enable visualization of nanomaterials derived from solution self‐assembly processes in organic solvents are highly desirable. Herein, we demonstrate the use of stimulated emission depletion microscopy (STED) and single molecule localization microscopy (SMLM) to map living crystallization‐driven block copolymer (BCP) self‐assembly in organic media at the sub‐diffraction scale. Four different dyes were successfully used for single‐colour super‐resolution imaging of the BCP nanostructures allowing micelle length distributions to be determined in situ. Dual‐colour SMLM imaging was used to measure and compare the rate of addition of red fluorescent BCP to the termini of green fluorescent seed micelles to generate block comicelles. Although well‐established for aqueous systems, the results highlight the potential of super‐resolution microscopy techniques for the interrogation of self‐assembly processes in organic media.     

Fluorescent Bioprobes: Structural Matching in the Docking Processes of Aggregation‐Induced Emission Fluorogens on DNA Surfaces

Whereas most conventional DNA probes are flat disklike aromatic molecules, we explored the possibility of developing quadruplex sensors with nonplanar conformations, in particular, the propeller‐shaped tetraphenylethene (TPE) salts with aggregation‐induced emission (AIE) characteristics. 1,1,2,2‐Tetrakis[4‐(2‐triethylammonioethoxy)phenyl]ethene tetrabromide (TPE‐ 1 ) was found to show a specific affinity to a particular quadruplex structure formed by a human telomeric DNA strand in the presence of K⁺ ions, as indicated by the enhanced and bathochromically shifted emission of the AIE fluorogen. Steady‐state and time‐resolved spectral analyses revealed that the specific binding stems from a structural matching between the AIE fluorogen and the DNA strand in the folding process. Computational modeling suggests that the AIE molecule docks on the grooves of the quadruplex surface with the aid of electrostatic attraction. The binding preference of TPE‐ 1 enables it to serve as a bioprobe for direct monitoring of cation‐driven conformational transitions between the quadruplexes of various conformations, a job unachievable by the traditional G‐quadruplex biosensors. Methyl thiazolyl tetrazolium (MTT) assays reveal that TPE‐ 1 is cytocompatible, posing no toxicity to living cells.     

Room Temperature Ring Expansion of N‐Heterocyclic Carbenes and BB Bond Cleavage of Diboron(4) Compounds

We report the isolation and detailed structural characterization, by solid‐state and solution NMR spectroscopy, of the neutral mono‐ and bis‐NHC adducts of bis(catecholato)diboron (B₂cat₂). The bis‐NHC adduct undergoes thermally induced rearrangement, forming a six‐membered ‐B?C?N?C?C‐N‐heterocyclic ring via C?N bond cleavage and ring expansion of the NHC, whereas the mono‐NHC adduct is stable. Bis(neopentylglycolato)diboron (B₂neop₂) is much more reactive than B₂cat₂ giving a ring expanded product at room temperature, demonstrating that ring expansion of NHCs can be a very facile process with significant implications for their use in catalysis.