SIMS of organic layers with unknown matrix parameters: Locating the interface in dual beam argon gas cluster depth profiles

Four simple methods are evaluated to determine their accuracies for establishing the interface location in secondary ion mass spectrometry intensity depth profiles of organic layers where matrix effects have not been measured. Accurate location requires the separate measurement of each ion's matrix factor. This is often not possible, and so estimates using matrix-less methods are required. Six pure organic material interfaces are measured using many secondary ions to compare their locations from the four methods with those from full evaluation with matrix terms. For different secondary ions, matrix effects cause the apparent interface positions to vary over 20 nm. The shifts in the intensity profiles on going from a layer of P into a layer of Q are in the opposite direction to that for going from Q into P, so doubling layer thickness errors. The four methods are as follows: M1, use of the median interface position in the intensity profiles for the five lightest ions for 15 ≤ m/z ≤ 150; M2, extrapolation of the position for each ion to m/z = 0 for ions with m/z ≤ 150; M3, as M2 but for m/z ≤ 300; and M4, the extreme positions for all m/z ≤ 100. Comparison with the location using matrix terms shows their ranking, from best to worst, to be M4, M3, M1, and M2 with average errors of 10%, 12%, 14%, and 17%, respectively, of the profile interface full widths at half maximum. Use of pseudo-molecular ions is very much poorer, exceeding 50%, and should be avoided.     

In-situ detection of drugs-of-abuse on clothing using confocal Raman microscopy

This study describes the application of confocal Raman microscopy to the detection and identification of drugs-of-abuse in situ on undyed natural synthetic fibres, and coloured textile specimens. Raman spectra were obtained from drug particles trapped between the fibres of the specimens. Pure samples of cocaine hydrochloride and N-methyl-3,4-methylenedioxy-amphetamine HCl (MDMA-HCl) were used in this study. Raman spectra were collected from drug particles of an average size in the range 5-15 μm. Despite the presence of spectral bands arising from the natural and synthetic polymer and dyed textiles, the drugs could be identified by their characteristic Raman bands. If necessary, interfering bands could be successfully removed by spectral subtraction. Furthermore, Raman spectra were recorded from drug particles trapped between the fibres of highly fluorescent specimens. Interference from the fibres, including background fluorescence, was overcome by careful focusing of the confocal beam and the resulting spectra allow ready differentiation from interference from the fibres substrate bands. Spectra of several drugs-of-abuse on dyed and undyed clothing substrates were readily obtained within 3 min with little or no sample preparation and with no alteration of the evidential material.     

Solid Contact Ion-selective Electrodes on Printed Circuit Board with Membrane Displacement

Multiplexed solid-contact ion-selective electrodes (SCISEs) are fabricated using printed circuit board (PCB) and mesoporous carbon black (MCB) as ion-to-electron transducer (solid contact). Four sensor configurations were examined and showed that in addition to MCB, the sensor configuration plays crucial role in the stability of the potential response. The enhanced sensor stability was also linked with suppression of transmembrane flux of water. The sensors exhibited near-Nernstian sensitivity (58.1 mV/dec for K⁺ ISEs and −55.1 mV/dec for NO₃^- ISEs), low detection limits (1.5–2.2 μM), and good short-term stability (∼0.1 mV/min). Sensors can be stored dry and used without preconditioning. This work demonstrates a promising approach to combining PCB technology and carbon black for large-scale production of low cost ISEs for point-of-care testing, wearables, or in situ field measurements.     

Simulation of free radical addition reactions modified by the presence of cobalt macrocycles

Free radical addition reactions in the presence of cobaloximes and related compounds have been modelled. Several mechanisms are presented and similarities with the “persistent radical effect” noted by Daikh and Finke are discussed. Cobaloximes and salophen

1 System. name: N-acetyl-p-aminophenyl salicylate.

derivatives are widely used in organic synthesis to build carbon-carbon bonds, whereas in polymer synthesis they are used as catalytic chain transfer agents in the production of oligomers. This work shows that these reactions are closely related and also demonstrates the influence that an external radical source has on the overall reaction kinetics.     

Kinetic stability of complex molecular clusters

This investigation is concerned with modeling the evaporation, or decay, of n-nonane molecular clusters. We use a unique cluster decay model that was first developed to estimate the decay time scale of argon clusters using molecular-dynamics simulations. In this study we seek to enhance the model so that it represents a more complex cluster decay dynamic, suitable for n-nonane clusters. Experimental measurements of nucleation rates of n-nonane droplets have been used to deduce the rate at which a molecule escapes from the cluster. Typically for an n-nonane cluster containing 40 molecules, at an experimental temperature of 225 K, the empirical decay time, which is the inverse of the decay rate, is estimated to be 50 ns. For this time scale, the direct observation of n-nonane cluster decay from a molecular-dynamics trajectory is not feasible, since decay events are so rare. However, the cluster decay model uses a combination of molecular dynamics and stochastic dynamics in order to resolve the problem associated with long decay time scales. The model is based on a Langevin treatment that views cluster decay as single-particle escape from a confining potential of mean force. It is used to predict kinetic decay times of n-nonane clusters. We discover this result differs significantly from a classically derived decay time scale determined from a continuum thermodynamic treatment of the population balance equations of clusters. However, the dynamically generated results obtained from the kinetic decay model compare more favorably than the classical results with the empirical decay times that are deduced from experimental measurements of n-nonane clusters.     

Magnesium amido N-heterocyclic carbene complexes

Magnesium dications bind strongly to a tridentate anionic dicarbene ligand L = [N{CH(2)CH(2)(CNCHCHNMes)}(2)] forming dinuclear and trinuclear Mg complexes with some particularly short Mg-C bonds. Treatment of the proligand H(4)LCl(3) with three equivalents of methyl magnesium chloride or benzyl magnesium chloride affords Mg(3)(HL)Cl(6) in high yield. A suspension of in thf was heated to 80 degrees C for 2 h to afford Mg(2)(L)Cl(3), consistent with the loss of one equivalent of MgCl(2), and the deprotonation of the remaining acidic NH, lost as HCl gas. Treatment of Mg(3)(HL)Cl(6) with one equivalent of KC(8) results in deprotonation of the ligand amine NH to afford Mg(3)(L)Cl(5); treatment with a second equivalent forms the radical anion of the complex, K[Mg(3)(L)Cl(5)], which decomposes upon storage, precluding its structural characterisation. The acidic NH proton of the ligand in Mg(3)(HL)Cl(6) can also be removed by deprotonation with Li{N(SiMe(3))(2)}; additional equivalents of which also exchange the magnesium-bound chlorides for silylamido ligands, affording Mg(2)(L)Cl(2)N' and Mg(2)(L)Cl(N')(2), which have both been characterised by single-crystal X-ray diffraction studies.     

Two-dimensional supramolecular assembly of phenylmercury(II) and cadmium(II) complexes with a tridentate thiohydrazone NNS donor ligand: Synthesis,coordination behavior and crystal structure

The reaction of phenylmercury(II) acetate and cadmium(II) acetate with a refluxed solution of diacetylmonoxime and morpholine N-thiohydrazide formed a novel phenylmercury(II) complex, [PhHg(Hdammthiol)] (1) and a cadmium(II) complex, [Cd(Hdammthiol)₂] (2), respectively (where H₂dammthiol is the thiol form of diacetylmonoximemorpholine N-thiohydrazone (Hdammth) formed by the condensation of diacetylmonoxime and morpholine N-thiohydrazide in the presence of phenylmercury(II) and cadmium(II) ions). The complexes were characterised by elemental analyses and spectral data (electronic, infrared and ¹H NMR) and also by X-ray crystal structure analysis. The X-ray crystallography shows that the phenylmercury(II) complex attained a tricoordinated distorted T-shaped structure, while the cadmium(II) complex attained a trapezoidal bipyramidal geometry. The phenylmercury(II) complex forms a two-dimensional sheet via C–H?O and O–H?N hydrogen bonding and also forms a two-dimensional supramolecular dimer, having C–H?π synthons. Intermolecular C–H?O and O–H?O hydrogen bonding of the cadmium(II) complex forms a two-dimensional supramolecular sheet along the bc plane and posses an impressively short intermolecular C(sp³)?O(sp³) contact.     

PCILO calculation of intermolecular energies: The water dimer

The PCILO (perturbative configuration interaction using localized orbitals) method for approximating the electronic structure of molecules has been used with some success for calculating intramolecular interactions in large molecules where intramolecular hydrogen bonding is involved. In this note we show that the PCILO method may be used to calculate the energy of interaction between two water molecules in selected configurations.     

Hyperconjugation and homoconjugation in alkyl radicals bearing β-phosphorus substituents

The isotropic ³¹P hyperfine splitting constants derived from the ESR spectra of a series of β-phosphorus-substituted alkyl radicals are in the order expected for hyperconjugative spin transmission.