Pyridine N-alkylation by lithium, magnesium, and zinc alkyl reagents: synthetic, structural, and mechanistic studies on the bis(imino)pyridine system

The 2,6-bis(alpha-iminoalkyl)pyridines 2,6-[ArNC(CR(3))](2)C(5)H(3)N [R = H, D; Ar = 2,6-i-Pr(2)C(6)H(3) (DIPP), 2,6-Me(2)C(6)H(3) (DMP)] react with MeLi in Et(2)O to give a binary mixture of products: the pyridine N-methylated species 2,6-[ArNC(CR(3))](2)C(5)H(3)N(Me)Li(OEt(2)) and the deprotonated/dedeuterated species 2-[ArNC(CR(3))],6-[ArNC(=CR(2))]C(5)H(3)NLi(OEt(2)). For R = D, the product ratio is 2:1 in favor of the N-methylated product, while, for R = H, the deprotonated product is favored by 5:1, increasing to 8:1 in toluene solvent. Warming solutions of the N-methylated species leads to clean conversion to the thermodynamically preferred deprotonated species. Crossover experiments show that MeLi is re-formed and dissociates from the terdentate ligand before deprotonating the ketimine methyl unit. For MgR(2) (R = Et, i-Pr) and ZnR(2) (R = Et) reagents, N-alkylation products are formed exclusively, but derivatives containing bulky aryl substituents are found to undergo further rearrangement to 2-alkylated species, arising by migration of the alkyl group of the N-alkyl moiety to the adjacent ring carbon atom. The reversibility of the N-alkylation process has been probed using deuterio-labeled Mg alkyl reagents and mixed alkyl zinc species. A cationic zinc derivative is shown to undergo "reverse" alkyl migration, from the heterocycle nitrogen atom to the zinc center. EPR spectroscopy reveals a paramagnetic intermediate in which the unpaired electron is delocalized over the heterocycle and di-imine moieties of the ligand, indicating that the N-alkylation reactions proceed via single electron-transfer processes.     

Quinazolines and 1,4-benzodiazepines. XCV. Synthesis of 1,4-benzodiazepines by ring expansion of 2-chloromethylquinazolines with carbanions

1,4-Benzodiazepines bearing a carbon substituent at the 2-position were obtained by reaction of 2-chloromethylquinazoline 3-oxides with stabilized carbanions. The carbanions of alkyl acetates, N,N-disubstituted acetamides, acetonitrile, dimethylsulfone, N,N-dimethyl methanesulfonamide and 2-methylpyridine were successfully applied. The conversion of some of the 2-carbon substituted 1,4-benzodiazepines to imidazo[1,5-a][1,4]benzodiazepines and [1,2,5]oxadiazino[5,4-a][1,4]benzodiazepines is described.     

The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Sulphate preconcentration by anion exchange resin in flow injection and its turbidimetric determination in water

A preconcentration procedure was established for sulphate determination in rain waters at the mg/l level, employing a small column packed with the AG1-X8 (200-400 mesh) anionic resin inserted into a flow injection system. Sulphate determination was performed by using the turbidimetric method based on reaction with barium. For concentrations within 0.10 and 2.0 MgSO(2-)(4)/l, a throughput of 50 determinations/hr was achieved, and the relative standard deviation of results was better than 2%.     

Surface passivation of luminescent colloidal quantum dots with poly(dimethylaminoethyl methacrylate) through a ligand exchange process

Polydimethylaminoethyl methacrylate (PDMAEMA) was used as a multidentate ligand to modify the surface of CdSe/ZnS core-shell colloidal quantum dots in toluene with trioctylphosphine oxide (TOPO) as the surface ligand. Adsorption of PDMAEMA was accompanied by release of TOPO. The process is free of agglomeration, and the modified nanocrystals become soluble in methanol. The photoluminescence properties are well-preserved in either toluene or methanol.     

Study of the major fragmentation pathways of cypermethrin and related synthetic insecticides using tandem mass spectrometry

Fragmentation pathways of the synthetic pyrethroid cypermethrin and four structurally related insecticides were investigated using a tandem quadrupole mass spectrometer incorporating a hexapole collision cell under positive-ion electron impact ionization conditions. Conventional mass spectrometry using the first quadrupole analyser only and tandem mass spectrometry on selected precursor ions and product ions, and also constant neutral loss scan experiments, were used. Mechanisms and fragmentation pathways are proposed to explain the inherent stability of ions associated with the benzylphenoxy portion of this class of insecticide.     

The action of a benzotriazole light stabilizer in wool. I. A diffuse reflectance analysis of UV screening

A procedure based on diffuse reflectance spectroscopy was developed to determine the UV screening effect of a benzotriazole light stabilizer in wool fabric. Expressions that enable the protective effect of the stabilizer to be calculated directly from reflectance data were derived. The dependence of the screening effect on additive concentration was deduced from measurements of fabric reflectivity in the wavelength range of 300–400 nm. Two reflectometers with quite different optical geometries were used to measure the reflectance spectra and the merits of the two systems are discussed. A theoretical expression for the optical screening phenomenon in highly scattering materials was evaluated for substrates of different reflectivity and the general implications of this relationship are considered.     

Epitope promiscuity of human monoclonal autoantibodies to T-cell receptor-combining site determinants

To characterize the binding specificity and light- and heavy-chain variable region usage in monoclonal human autoantibodies (mAAbs) to T-cell receptors, we constructed heterohybridomas from peripheral blood B cells of three rheumatoid arthritis (RA) patients. From a panel of more than 200 heterohybridomas secreting IgM autoantibodies binding to T-cell receptor Vbeta chain first complementarity determining segments (CDR1), we characterized two IgM/lambda molecules from a single patient in detail. These bound to both CDR1 peptide epitopes and intact TCR of recombinant single-chain T-cell receptor constructs, and to T-cell surface TCR. Spectratype analysis using epitopes mimicking a set of 24 Vbeta genes indicated that one molecule bound only a few members of the set, whereas the second showed considerable epitope promiscuity by binding to more than half of the tested CDR1 peptides. Both mAAbs used variants of a Vlambda3 gene that were very similar to one another and to the germline gene. The epitope-promiscuous autoantibody used a V(H)4 gene identical to a germline prototype, while the other incorporated a V(H)3 sequence differing in only a single residue from its germline prototype. The CDR3s of both were large and distinct from each other as well as from the corresponding segments of rheumatoid factors and "cold agglutinins" using the same or related V(H) germline genes. These mAAbs offer models for deciphering the basis of epitope promiscuity, and serve as candidates for direct use in immunomodulation because they are of intrinsic human origin and do not require molecular engineering to adapt them for use in therapy.     

Photolysis of p-benzoquinone in N2 matrices at 12K: a novel decomposition pathway

Photolysis of _p-benzoquinone in N₂ matrices at 12K has been found to give acetylene and CO; 1,4-naphthoquinone and 9,10-anthraquinone, however, are inert under similar conditions.     

Enantioselective aziridination using copper complexes of biaryl Schiff bases

Racemic 2,2'-diamino-6,6'-dimethylbiphenyl is resolved using simulated moving bed chromatography, and the absolute configuration of the enantiomers is confirmed via the X-ray crystal structure of a derivative. The diamine is condensed with a range of aldehydes to give bidentate aldimine proligands L. Molecular structures of the complexes formed between L and Cu(I) fall into two classes; bimetallic double helices ([Cu(2)L(2)](2+)) and monometallic ([CuL](+)). The latter are strikingly more efficient in the aziridination of alkenes than are the former in terms of rate, turnover, and enantioselection. In particular, the imine ligand formed from the diamine and 2,6-dichlorobenzaldehyde gives, in combination with Cu(I) or Cu(II), up to 99% ee in the aziridination of 6-acyl-2,2-dimethylchromene and 88-98% ee for a range of cinnamate esters. Styrenic and other alkenes are converted with lower selectivities (5-54%). The catalytic system shows a linear response in product ee to catalyst ee, and the product ee does not vary significantly during the reaction. UV spectrophotometric investigations indicate that conversion of Cu(I) to Cu(II) is not essential for catalysis but that Cu(II) is probably also a competent system.